xboxscene.org forums

Author Topic: Maximus Xtractor 360 And Usb Xtractor Support  (Read 32 times)

XMadMen

  • Archived User
  • Newbie
  • *
  • Posts: 7
Maximus Xtractor 360 And Usb Xtractor Support
« on: August 18, 2009, 05:37:00 AM »
HI All,



   Until this point (Lite-on V1), the tools from Maximus were great, now there is no update or support.

   The tools are not that cheap and should had some sort of custumer support from him or even carranzafp.

   There is no schematics for replace fuses by PPTC ones, or any other update since April.

   Why CK3 works on new V2 and Xtractor does not? Why doesn´t Maximus revise it and place any electronic schematic alteration, or a firm update (sorry if it's impossible,or other (but anyway tell something about it))?

In my case and a friend we have 4 pcs of is hardware, (Xtractor Pro, UsbXtractor,Spear and Power Dongle), and more people are in same situation.

We think we diserve a better support.

Regards
 (IMG:style_emoticons/default/uhh.gif)


P.S. - And pls don't tell me that you can use software and console to power up the drive !!!! That's not what's in discussion .... *** It's like you have bought a personal transportation, and seller tells you to go by bus... ***

This post has been edited by XMadMen: Aug 18 2009, 12:48 PM
Logged

majinsoftware

  • Archived User
  • Hero Member
  • *
  • Posts: 703
Maximus Xtractor 360 And Usb Xtractor Support
« Reply #1 on: August 18, 2009, 05:48:00 AM »
Just use jungle flasher.
Any brand and type of probe will work on any liteon drive with firmware 7XXXX
Just the HW A0A2 requires you to manually enter the serial info, where the A0A1 did it automaticly.

Firmware 8XXXX cant be dumped by probe, you need to use the new lo83.exe and freekey/openkey.
Logged