Topic: Lite-On 83850c Hardware and Software Support Thread (Read 712 times)

gnarkilljboy · « **Reply #150 on:** November 22, 2009, 12:55:00 PM »

QUOTE(inam22 @ Nov 22 2009, 02:45 PM)

Key should be already saved automatically in you Lite_cfw.bin when you press save to file tab.Let me know how did you go or if you need any assisant.

gonna pm you...

Utsi · « **Reply #151 on:** December 02, 2009, 01:42:00 AM »

I tried flashing my LiteOn, but the drive got screwed up when trying the tray half way open trick by unplugging the power cord, it's no longer recognized by the xbox (flashing green light and status opening/closing without anything happening).

I've previously read that my xbox can now be considered a door stop, but I've also read that there are ways to save the darn thing.

Can someone point me in the right direction, where I can find updated info on:
-What hardware do I need (USBExtractor etc)?
-Where can I find an easy to follow tutorial on how to extract my CPU key?

Utsi · « **Reply #152 on:** December 02, 2009, 08:33:00 AM »

Scratch that post.

Stupid me, hadn't read that if you updated to 849x your xbox was screwed. Well, it's screwed.

carmander · « **Reply #153 on:** December 12, 2009, 11:39:00 PM »

hi everyone, hopefully someone can help me with my problem. i successfully extracted my drive key (i hope) and was doing the MTK Flash 32 bit. I sent the erase command but I think i pulled out the power too soon or at the wrong time. What I've got now is that the drive is in vendor mode but i don't have any Flash Chip Properties (Vendor ID: 0x0, Device ID: 0x0, Name: Unknown type, Size: n/a, Type: (blank). What should I do now? my 360 light is constantly blinking and thinking i'm trying to open the drive. the eject button doesn't work either. i'm a little freaked. i'm going to do some more searching on the forums (read something about dosflash) but i'd appreciate any help. THanks.

sorry, forgot to mention. i've got lite-on 83850c hopefully the first wave. like i said, i was able to dump the key which leads me to believe i can still load ix1.6 evntually. thanks again.

This post has been edited by carmander: Dec 13 2009, 07:40 AM

amp2006 · « **Reply #154 on:** December 13, 2009, 03:04:00 AM »

in this cases i use Iprep to write the flash since you got the key .

carmander · « **Reply #155 on:** December 14, 2009, 09:52:00 PM »

thanks for replying. turns out all i had to do was put the drive back into the "normal" mode (not vendor), then re-send the erase and intro. after that it captured flash information fine and i was off to the races. I think when i screwed it up i just pulled the power plug too early. thanks.

pwedkc · « **Reply #156 on:** December 17, 2009, 11:15:00 AM »

Ok so with a million different methods, what is the proper way to flash an 83850C from June09 without JungleFlasher (since it crashes my PC)?

jgcaap · « **Reply #157 on:** January 14, 2010, 05:21:00 PM »

make a usb drive with dosflash, works great, only issue here is that you problably have first to use MRA hack in order to unlock your drive. Your lite on is from wich manufacturer? Philips?

iateshaggy · « **Reply #158 on:** January 15, 2010, 12:12:00 PM »

QUOTE(pwedkc @ Dec 17 2009, 12:15 PM)

Ok so with a million different methods, what is the proper way to flash an 83850C from June09 without JungleFlasher (since it crashes my PC)?

or fix the problem that made your pc crash. remove your via driver the way the jungle flasher tutorial says to.
http://jungleflasher...ngleFlasher.pdf

amp2006 · « **Reply #159 on:** January 15, 2010, 02:05:00 PM »

QUOTE(iateshaggy @ Jan 15 2010, 10:12 PM)

or fix the problem that made your pc crash. remove your via driver the way the jungle flasher tutorial says to.
http://jungleflasher.net/files/JungleFlasher.pdf

or he can use Iprep

This post has been edited by amp2006: Jan 15 2010, 10:06 PM

Majere · « **Reply #160 on:** January 15, 2010, 08:20:00 PM »

Hi, i have a 83850c august 2009, i try using jungleflasher but when i use L038.info he read some information but at the end i have the result "Extract number 2 doesn't match" do i made error or i have the V2? I try many times but have always the same error.

Thanks.

amp2006 · « **Reply #161 on:** January 20, 2010, 03:00:00 PM »

QUOTE(Majere @ Jan 16 2010, 06:20 AM)

Hi, i have a 83850c august 2009, i try using jungleflasher but when i use L038.info he read some information but at the end i have the result "Extract number 2 doesn't match" do i made error or i have the V2? I try many times but have always the same error.

Thanks.

august and July i think they are both V1

i used Iprep for mine

_jaded · « **Reply #162 on:** January 20, 2010, 09:32:00 PM »

Is there anyway to visually tell if I have a V1 or V2 83850c?

I don't have the manufacturer's date 'cause they were gutswapped.

wussmonster · « **Reply #163 on:** January 22, 2010, 04:07:00 AM »

QUOTE(Utsi @ Dec 2 2009, 04:33 PM)

Scratch that post.

Stupid me, hadn't read that if you updated to 849x your xbox was screwed. Well, it's screwed.

wait, so if my xbox is updated to 849x then i cant flash my lite on drive thats in it?

ErlendFS · « **Reply #164 on:** February 22, 2010, 11:15:00 PM »

Hello,

I am sorry for being the noob over here. I ve flashed 50 drives, but never one of these new ones. I am using the LT Switch. The LEDs report green/red as normal. However, when I start JungleFlasher or DosFlash32 my PC freezes. Ive disabled my 6421 card, deleted viamraid.sys, and enabled the card again. No go, it freezes.
What can be wrong, and where do I go from here?

thanks

Edit: Tried using dosflash in dos. It stops after identifying the drive (port, identity..), and just stands still without any reaction. I am still clueless.

Author Topic: Lite-On 83850c Hardware and Software Support Thread (Read 712 times)