Topic: Lite-On 83850c Hardware and Software Support Thread (Read 714 times)

yanksrule421 · « **Reply #45 on:** September 06, 2009, 08:50:00 AM »

QUOTE(PornOH @ Sep 5 2009, 04:34 PM)

You do not need to solder or use the probe on the 8xxxx drives.

my bad i just found out i have a 7xxxx drive
i do not want to solder or use the probe because i dont have one is there any other way

yanksrule421 · « **Reply #46 on:** September 06, 2009, 09:24:00 AM »

ohh and if i buy a lite on 8xxxx will it still work with my motherboard
thx

brain27 · « **Reply #47 on:** September 07, 2009, 10:02:00 AM »

QUOTE(yanksrule421 @ Sep 6 2009, 04:24 PM)

ohh and if i buy a lite on 8xxxx will it still work with my motherboard
thx

I dont think so. Cross spoofing isnt supported. Sorry

Bulla666 · « **Reply #48 on:** September 07, 2009, 11:08:00 AM »

I've got an 83850C and I think I've got my head round flashing. Am I right in thinking that I can get my key using JF and then spoof it onto a spare VAD6038 to test that its worked correctly ? I presume once spoofed the BenQ should play backups ? Then if the BenQ has worked I can go ahead and write to my Liteon ?

Bulla

otakonx · « **Reply #49 on:** September 08, 2009, 09:49:00 AM »

My 3rd 360 died last night so I went out and picked up an Elite. It has a LiteOn 83850c in it and thankfully not the older model. It's been years since I've posted here so forgive me if I'm reposting something that's been answered though I've read through countless posts and tutorials. Anyway, I made spoofed LiteOn with my older ms28 drive and successfully flashed it with the LiteOn's key (tested and booted retail games). I'm having problems using the LiteOn erase in JungleFlasher. JungleFlasher returns a drive status of 0x51 which causes the process to fail. I'm using a VIA chipset with PortIO32 installed and VIA's drivers uninstalled. Could this been an issue with me using a spoofed samsung drive? I've been at this for many hours any insight is appreciated.

aditya_akula · « **Reply #50 on:** September 08, 2009, 10:51:00 AM »

I have a flash modded 369 with lg hitachi drive and the firmware is old...when i try to connect to live it asks to update ,so should i do that or not....

plss help me ...am nOOB..

otakonx · « **Reply #51 on:** September 08, 2009, 01:33:00 PM »

QUOTE(otakonx @ Sep 8 2009, 11:49 AM)

... I'm having problems using the LiteOn erase in JungleFlasher. JungleFlasher returns a drive status of 0x51 which causes the process to fail. ...

After some much needed rest I figured out the problem. Even though I spoofed my ms28 as a LiteOn it's STILL a Samsung drive in reality. I figured this out after writing LiteOn fw to the damn thing. Hopefully this helps anyone else having this idiotic problem.

OggyUK · « **Reply #52 on:** September 08, 2009, 03:38:00 PM »

QUOTE(Bulla666 @ Sep 7 2009, 06:08 PM)

I've got an 83850C and I think I've got my head round flashing. Am I right in thinking that I can get my key using JF and then spoof it onto a spare VAD6038 to test that its worked correctly ? I presume once spoofed the BenQ should play backups ? Then if the BenQ has worked I can go ahead and write to my Liteon ?

Bulla

Correct.

Bulla666 · « **Reply #53 on:** September 10, 2009, 12:59:00 PM »

QUOTE(OggyUK @ Sep 8 2009, 10:38 PM)

Correct.

So I just dumped my Liteon and spoofed my Benq. Everything is fine. Is there any reason now why I shouldnt just use my BenQ and keep the Liteon unmolested as a spare ?

Bulla

OggyUK · « **Reply #54 on:** September 10, 2009, 06:51:00 PM »

Spoofing is always more detectable over XBL ... If MS choose to.

shadybuc · « **Reply #55 on:** September 11, 2009, 10:13:00 AM »

do i need a connectivity kit to flash the 83850c

shadybuc · « **Reply #56 on:** September 11, 2009, 11:03:00 AM »

QUOTE(xbox360sexual @ Aug 13 2009, 12:56 PM)

Use LO83 to extract the ident and key information, then use FudoWarez program to open the .bin file, decrypt the key, and generate a dummy file for use with JungleFlasher.

So in this order:

1.) Download and run LO83info_32.exe with Liteon drive connected

http://anonym.to/?ht...850c/83850c.rar

2.) Download and run the FudoWarez program. Open the file you saved with LO32, decrypt the key, and save a Dummy.bin file

http://anonym.to/?ht...850c/83850c.rar

3.) Run JungleFlasher. Open the Dummy.bin file and flash to drive.

http://www.junglefla...0.1.65.Beta.rar

why doesnt the tut in original post have any of this? it just use JF.

also is there a way to get the orig.bin, in case the flash goes bad?

brain27 · « **Reply #57 on:** September 12, 2009, 09:32:00 AM »

QUOTE(shadybuc @ Sep 11 2009, 06:03 PM)

why doesnt the tut in original post have any of this? it just use JF.

also is there a way to get the orig.bin, in case the flash goes bad?

Thats the old method, now JF 1.66 does everything for you.

There is no original f/w for the liteon. Once you've flashed there is no going back.

The ck3 isnt necessary. You only need a via 6421a pci card and a sata cable.

daman22 · « **Reply #58 on:** September 12, 2009, 12:00:00 PM »

QUOTE(brain27 @ Sep 12 2009, 04:32 PM)

Thats the old method, now JF 1.66 does everything for you.

There is no original f/w for the liteon. Once you've flashed there is no going back.

The ck3 isnt necessary. You only need a via 6421a pci card and a sata cable.

that sucks... is JF the best method for new liteons?

famoussasjohn · « **Reply #59 on:** September 12, 2009, 06:13:00 PM »

do i need a probe connected when I am using 360 xtractor? i kept getting this error "360 xtractor "No USB ports found, by default the first COM port is selected." and could not go any further, my computer does not have a COM port, which may be the problem, I extracted the key just fine with freekey, and now i just need to do the 360 xtractor stuff but am having trouble sad.gif

Author Topic: Lite-On 83850c Hardware and Software Support Thread (Read 714 times)