Topic: Dosflash V1.8 With Liteon V2 Freekey Support (Read 189 times)

laaaap · « **Reply #30 on:** August 09, 2009, 07:58:00 PM »

any info about position of drive door?

half open when ? full open when ? some details please *?

it works with intel sata *?

also , does xbox drive must be turned on with sata conected to pc or to console ?

thanks for help

moh82mk · « **Reply #31 on:** August 09, 2009, 09:20:00 PM »

QUOTE(laaaap @ Aug 9 2009, 09:58 PM)

any info about position of drive door?

half open when ? full open when ? some details please *?

it works with intel sata *?

also , does xbox drive must be turned on with sata conected to pc or to console ?

thanks for help

These are my questions as well. Anybody can provide a brief tutorial or answer these question? Specially if it can be done using a Intel 82810 chip.

Thank

Xmodss · « **Reply #32 on:** August 10, 2009, 06:41:00 AM »

a nice feature to add would be rescan the port upon change, because it scans for drives finds my pio burner 0xc080 then stops scanning never scans my via card at all 0xd800 & 0xd880 so basically i have to pull apart my pc disconnect my burner to get it to even see any drive connected to my via card yes i deleted the vsmraid.sys file, and read the read me always do

This post has been edited by Xmodss: Aug 10 2009, 01:42 PM

FrostyTheSnowman · « **Reply #33 on:** August 10, 2009, 08:45:00 AM »

Holy shit Schtrom! You've out-done yourself!

Props dude.

This scene never ceases to amaze me.

HotKnife420 · « **Reply #34 on:** August 10, 2009, 05:34:00 PM »

On ICH5 chipset this version seems to be buggy; didn't work like 1.7 does with any of my drives, but on ICH9 chipset it worked like a dream.

To elaborate on "buggy", I couldn't get a samsung to dump, or a liteon to erase/flash. The same hardware (system with ICH5) has been used constantly with JF with little to no problems, so config/chipset is good. Dosflash 1.7 works better on ICH5, if that helps anyone out.

Obveron · « **Reply #35 on:** August 11, 2009, 06:43:00 AM »

Thanks so much for continuing to support Dosflash16. Many of us find it way more simple to just use a DOS boot disk (DOS boot usb stick) and dosflash16.

vike105 · « **Reply #36 on:** August 11, 2009, 08:55:00 AM »

Thanks alot, just tried the 64 bit on a stock Benq under Windows Server 2008 and worked flawlessly. I just left the drive to be powered by the 360 and just hooked up the sata to my motherboard. I didnt have to do any type of tricks like leaving the tray half out.

Supernana · « **Reply #37 on:** August 14, 2009, 05:13:00 AM »

i try this
DosFlash LITEON K 0970 1 inquiry.bin identify.bin key.bin dummy.bin enckey.bin

but tell me "can't get inquiry data"

OggyUK · « **Reply #38 on:** August 14, 2009, 05:25:00 AM »

I have to ask, is 0x0970 your actual sata address?

chitugi · « **Reply #39 on:** August 14, 2009, 04:10:00 PM »

hello all has anyone tryied this on a bricked dg-16d2s as im one of those who spends hours to get to 72 status and attempt to erase and flash but when it comes to flash it just hangs at "erasing...". The final step. i tried on 2 pcs already. 72 status can be achieved but downhill after that. df16 is what i used 1.7

chitugi · « **Reply #40 on:** August 14, 2009, 04:41:00 PM »

nevermind samething. just hangs on erasing... . Oh well guess ill jus have to keep playing with it til i guess it just goes. Question, i can erase with liteon E but not with E. When it does indeed erase with liteon e, it says erasing ok. Is that suppose to happen or should banks actually show being erased because i dont see that. Otherwise great program. This drive is just driving me nuts as it should be able to be saved because i can get a 72 status and show winbond and 256kb and info shown up. (IMG:style_emoticons/default/huh.gif)

thestanleycup · « **Reply #41 on:** August 14, 2009, 10:59:00 PM »

thanx for this dosflash 1.8 What i've done is boot whit floppy in dos , used dosflash16 with command : dosflash16 liteon k c800 1 inquiry.bin identify.bin key.bin dummy.bin enckey.bin and it got all the files saved on my floppy without a problem asking to put the drive whit the door closed half-way for step 1 and i hit yes and after that step 2 it asks to close and eject the door and hit yes when ready so at the end my door was ejected and it read and saved all my info.... After i booted in XP , opened JG 1.65 , loaded the dummy.bin in the source area and in the target put the ixtreme thx1.6 for the liteon 83850c , hit spoof to get the correct key and saved my file on the floppy ( i named it test.bin ) After rebooted in DOS with no com1 connected with the tray of the drive closed, typed the command L-O-ERAS c800 to get the status ff00 , after typed dosflash , dosflash wants me to resend command to drive , i pressed yes, gives me a status 72 , then i swithed off my drive and on right after and chose the options from the menus to wich ddrive and then W to write and then my file (test.bin) , the process was 3x faster than dosflash 1.7 , plugged the drive back in the console works lilke a charm

many thanx again

chitugi · « **Reply #42 on:** August 14, 2009, 11:17:00 PM »

all good now. had to use a totally different motherboard. luckily i have like 4 motherboards. successfully flashed on nforce 7 series on the 1st try. dg-16d2s is a very picky drive for a lot of boards out there. Great Program again!!!!!!!!!!!! (IMG:style_emoticons/default/biggrin.gif)

razzy35uk · « **Reply #43 on:** August 15, 2009, 10:52:00 PM »

works just fine ` i didnt even type all those commands i just used auto mode and it got the files
thanks Schtrom yr tools are well appreciated :-)

This post has been edited by razzy35uk: Aug 16 2009, 05:53 AM

mygdani · « **Reply #44 on:** August 16, 2009, 01:14:00 AM »

Thankyou very much. Works perfect.

Author Topic: Dosflash V1.8 With Liteon V2 Freekey Support (Read 189 times)