Topic: Can't Even Get A0a2 Liteon Key (have Done Hundreds Liteons Before) (Read 52 times)

s1lv1a9999 · « **on:** February 02, 2020, 06:18:00 PM »

I have flashed hundreds of Liteon drives before, even the new A0A2 drives, but can't get this one to work.

I have the probe adapter and when placed on the correct contact, it doesn't have a blue light as it normally does.

When I try to get the key etc, it gets nothing.

I tried the old solder method too, and same thing.

Has anyone had this problem or got any ideas?

If it was just a need to rebuild the serial data as has happened a number of times before, that would be no problem, but I can't get anything from this drive.

EDIT: I just found other posts with the same problem, pics of the board/label are below.

(IMG:http://www.mod-store.com.au/images/A0A2.jpg)

(IMG:http://www.mod-store.com.au/images/Board.jpg)

This post has been edited by s1lv1a9999: Yesterday, 02:30 AM

deilzfcjk · « **Reply #1 on:** February 02, 2020, 06:29:00 PM »

Because that's the new f/w revision. Where have you been? If you have done 100 you should be pretty knowlegable about the scene.

s1lv1a9999 · « **Reply #2 on:** February 02, 2020, 06:35:00 PM »

First one of these that I have had, so haven't checked back here for a while.

Ranger72 · « **Reply #3 on:** February 02, 2020, 06:57:00 PM »

Give it a couple months something will come out to work with this new drive revision.

Author Topic: Can't Even Get A0a2 Liteon Key (have Done Hundreds Liteons Before) (Read 52 times)