Print

[rippedup]

I connect my liteon drive up to my pc - a dell xps 420 - running vista 32bit . In the bios it detects the drive but when i open jungle flasher it says no drive detected, i have CK3 lite with the probe and connect to my pc with a serial to usb converter. Jungle flasher picks his p as it gets the write com port (7) and says the name under it. i have Port IO32 installed, and using the motherboard sata ports.

Any help would be a great help Thanks.

[Ranger72]

Are you selecting the proper port in Jungle Flasher?

[run187]

Have you installed the drivers for the ck3 and is the drive half open and i dont think vista works with the lite version of ck3 dosent report port correctly maybe better doing with FTS usb disk making sure either way that you get the key ect off drive first ..

This post on another site may help   http://www.360mods.net/index.php?name=Foru...pic&t=12342

This post has been edited by run187: Jun 3 2009, 03:09 PM

[rippedup]

I have tried using IPrep but because im using a serial to usb converter and have no serial ports it doesn't like it i think cause i got error straight away saying wrong com port.

I am selecting the right comport on jungleflasher because it says its ready but still says no drive found! underneath

T-X USB Drivers are for the USB to serial converter right? well i got PL-2303 driver down and this workd and is appearing on my computer as a comport.

I dont know what to do i have done so many times with drive out when starting up then plugging it in, plugged in on start up, turning off and on, tray out, in and half way nothing makes jungleflasher see it,



This post has been edited by rippedup: Jun 3 2009, 03:44 PM

[babe69]

QUOTE(rippedup @ Jun 3 2009, 10:37 AM)

I have tried using IPrep but because im using a serial to usb converter and have no serial ports it doesn't like it i think cause i got error straight away saying wrong com port.

I am selecting the right comport on jungleflasher because it says its ready but still says no drive found! underneath

T-X USB Drivers are for the USB to serial converter right? well i got PL-2303 driver down and this workd and is appearing on my computer as a comport.

I dont know what to do i have done so many times with drive out when starting up then plugging it in, plugged in on start up, turning off and on, tray out, in and half way nothing makes jungleflasher see it,

 as run187 said ,  have you install the driver for ck3 ??

this is not the same as usb driver

[rippedup]

What drivers are these and where you get them? cos i hav looked before for ck3 drivers but found none. i do have IO32 installed.

[hardie]

http://team-xecuter.com/ck3/downloads.htm#ck3tool124

This post has been edited by hardie: Jun 4 2009, 07:33 AM

[rippedup]

Thanks but i now remember that i have installed those drivers before :S

[tequiller]

Certain drivers windows are probably conflicting, causing it to not show up... I had this problem, and went with a fresh install of windows.  Maybe if you can find a cheap smaller hard drive, and have the room, you could use this just for your flashing, and just set up a dual boot.

There are also some drivers you could remove to help compatibility I think.

VMRaid?

I have a separate computer just for flashing with a very basic windows setup.

Can pm me for more info

[rippedup]

yeah thats a good idea - i got 80gig detachable hard dirve could give it a go (IMG:style_emoticons/default/smile.gif)

I also got a VIA6421 sata card coming tomoro so i will plug tht in and see if that solves it if not i wil try your suggestion -

Thanks guys