Print

[Ranger72]

You will have to finish flashing in dos. Checkout the link below.

http://forums.xbox-s...howtopic=673708

[xbox360sexual]

Have you clicked "device intro" and followed the prompt?

[Ranger72]

QUOTE(Djpj @ Jun 2 2009, 12:50 PM)

Device intro? is that needed?

you must mean Intro/Device ID button?

While i was waiting for an answer, i did some google work and someone said that you had to power cycle the drive, then send intro.
Does that really work? i really don't want to f*ck it up any more than this

It works some times. But as long as you have the proper dump files you cant fudge it up too bad. Worse case you just simply have to flash it from within dos.

[xbox360sexual]

Remove the drive key from your logs in your first post tbh. Well done flashing it

[headonism]

If u have your key which looking in previous posts u do, then follow the dosflash route, it works everytime

i found that if i loaded iprep onto a mem stick then added dosflash (latest version)
also add l-o-eras onto said mem stick
you will also need a copy of your lite_cfw.bin files added to the stick

now boot iprep but dont use it, Instead run l-o-eras (port no) mine being (ec09)

you should revcieve back ff80 just type it again and you should recieve ff72 if you get ff80 again then just turn the drive off and on again, now run l-o-eras again untill you recieve ff72
--------------------------------------------------------------------------------------------------

im now taking it that u have ff72 so you should type dosflash

it will ask something about do u want to send mtk or somthing along them lines i hit (N)

it will now ask where is your drive mine is on 6 but yours may be different

it will give u some options to WRITE, ERASE, READ

as u have the key already.... TYPE LITEON E.... this will erase the drive once this is complete go back into dosflash again hit (N) then select where your drive is again mine was 6.

now u'll get the same message WRITE, READ , ERASE this time you want to wite your custom firmware.
you should go ahead and select W - Write

it will ask you what file name just type lite_cfw.bin, this will now write the custom firmwasre to ur drive, once finished you can restart ur pc put ur drive back in your xbox and play happy..........

[Djpj]

QUOTE(headonism @ Jun 3 2009, 02:41 PM)

If u have your key which looking in previous posts u do, then follow the dosflash route, it works everytime

i found that if i loaded iprep onto a mem stick then added dosflash (latest version)
also add l-o-eras onto said mem stick
you will also need a copy of your lite_cfw.bin files added to the stick

now boot iprep but dont use it, Instead run l-o-eras (port no) mine being (ec09)

you should revcieve back ff80 just type it again and you should recieve ff72 if you get ff80 again then just turn the drive off and on again, now run l-o-eras again untill you recieve ff72
--------------------------------------------------------------------------------------------------

im now taking it that u have ff72 so you should type dosflash

it will ask something about do u want to send mtk or somthing along them lines i hit (N)

it will now ask where is your drive mine is on 6 but yours may be different

it will give u some options to WRITE, ERASE, READ

as u have the key already.... TYPE LITEON E.... this will erase the drive once this is complete go back into dosflash again hit (N) then select where your drive is again mine was 6.

now u'll get the same message WRITE, READ , ERASE this time you want to wite your custom firmware.
you should go ahead and select W - Write

it will ask you what file name just type lite_cfw.bin, this will now write the custom firmwasre to ur drive, once finished you can restart ur pc put ur drive back in your xbox and play happy..........

It's already done man, see above. That must have been lots of typing for you