Topic: Lost 360 Orig.bin File!1! For Benq!~ (Read 49 times)

GunFiya · « **on:** April 13, 2009, 01:32:00 PM »

I tried flashing my xbox stock to IXTREME 1.51
and the jungleflasher froze on me. i seemed to have saved
the Benq_CFW.bin, BENQ-OFW.bin and Key.bin
i was wondering if there was any way to save my xbox

RDubbs007 · « **Reply #1 on:** April 13, 2009, 01:46:00 PM »

yes, use the ben_cfw (check the key as source firmware in jungle flasher to make sure it looks legit... should be a bunch of random numbers and letters, little or no repeats at all) and make a bootable usb drive (hp boot disc utility works good for this, tutorial here), download dosflash 1.7 and place the dosflash16.exe and dosflash16.typ files on the usb stick as well as the ben_cfw file. boot computer to your usb drive in dos. connect benq and power on. type in dosflash. select correct port. type w for write. type ben_cfw.bin and hit enter. should write and be complete within 30 seconds. you are done.

GunFiya · « **Reply #2 on:** April 13, 2009, 02:09:00 PM »

in the tutorial for the hp usb disk storage device it tells me to download some windows 98 files and extracted it onto the usb flash drive. do i still do this even if my computer is xP Home Edition?

RDubbs007 · « **Reply #3 on:** April 13, 2009, 02:13:00 PM »

yes you need the windows 98 boot files just to make the usb drive bootable, that is all (it doesnt install 98 to your pc or anything)

GunFiya · « **Reply #4 on:** April 13, 2009, 03:05:00 PM »

QUOTE(RDubbs007 @ Apr 13 2009, 09:22 PM)

type in dosflash. select correct port. type w for write. type ben_cfw.bin and hit enter. should write and be complete within 30 seconds. you are done.

after every word i write do i press enter and how do i know which port is the correct one (IMG:style_emoticons/default/huh.gif) \
mann flashing an Xbox is a mindfuck

GunFiya · « **Reply #5 on:** April 13, 2009, 04:32:00 PM »

how do i get the computer in dos mode in the beginning??

Refferehtom · « **Reply #6 on:** April 13, 2009, 05:22:00 PM »

QUOTE(GunFiya @ Apr 13 2009, 07:08 PM)

how do i get the computer in dos mode in the beginning??

You get your PC into DOS with that Bootable USB stick you made. Once you transfer all your dos files onto it, leave it plugged in and restart your PC. Upon reboot, go into your boot sequence and select your USB stick to boot from. Once in DOS, with your drive hooked up, type DOSFLASH (enter). It will scan your ports and you'll see what port you have to use. Just follow the onscreen instructions and you'll be ok.

GunFiya · « **Reply #7 on:** April 13, 2009, 10:31:00 PM »

alright... so i finished the flashing using the usb method asking me to get it in vendermode n wat not and i did and it asked me to write and i did the benq_cfw.bin file and then it erased and then copied and thenn it said cOmplete!!!

and then i closed the cd tray and pulled the plug and then i borrowed spiderman and i tried playing but it still says open tray when i put the game in anyone knows why?

hardie · « **Reply #8 on:** April 13, 2009, 10:42:00 PM »

try a different game maybe that game is dodgy burn
if not restore back to original put back together to make sure you can play originals
if that goes all good start all over again step by step flashing using dos if you feel better using that
P.S the way it is now does it play originals ?
if not i would say you didnt spoof the key into the target file(benqixtreme) when you used JF

This post has been edited by hardie: Apr 14 2009, 05:44 AM

GunFiya · « **Reply #9 on:** April 13, 2009, 10:51:00 PM »

yeah your right it doesnt play originals anymore
how do i spoof the key and turn it back to original?

hardie · « **Reply #10 on:** April 13, 2009, 11:03:00 PM »

First check your BENQ-OFW.bin file in jungle flasher put in source to make sure you have valid key
then click manual spoofing tab (in firmtool32 tab) load the key file you said you have and make sure the key matches in the source file and this key file
if thats all good thats your original file
just use dos as you did with the usb but put this file(BENQ-OFW.bin file on the stick and when it asks you hit the W and type this file name and that should restore back to original
to be sure put back together and test original games again
another option is to again make sure you have your BENQ-OFW.bin file with the valid key
load this into source of jungle flasher
add the 1.5.1benqixtreme into target
spoof to target should have your valid key now and save this file dont get it mixed up with your other one
then you add this file to your usb stick and use dos to flash like you did before
these are your options
I am only saying restore it back to original again as a precaution so that you know you can play originals and the box is working fine then its a matter of redoing it over again with the knowledge that you now have

PS I bet if you open the Benq-CFW.bin file in the source in JF the key shows all 7's

This post has been edited by hardie: Apr 14 2009, 06:09 AM

GunFiya · « **Reply #11 on:** April 13, 2009, 11:17:00 PM »

hahaha!!! ima fuckin foolio i forgot to hook the sata back in the xbox when i tried playing the backup game (IMG:style_emoticons/default/laugh.gif) (IMG:style_emoticons/default/laugh.gif) (IMG:style_emoticons/default/laugh.gif) (IMG:style_emoticons/default/laugh.gif)
thanxx bro.. these past 4 days were the biggest depress of my life.. i was ready to throw this xbox in the garbage

hardie · « **Reply #12 on:** April 13, 2009, 11:19:00 PM »

you fool (IMG:style_emoticons/default/tongue.gif)

so i take it everything is all good now plays origs and backups (IMG:style_emoticons/default/pop.gif)
if so GREAT and keep your 3 files you have safe as one day you may need them

Author Topic: Lost 360 Orig.bin File!1! For Benq!~ (Read 49 times)