Print

[sguse5]

So basically yesterday I was modding 2 xbox 360's. The first one I soldered my serial cable and dumped all my keys and flashed to 1.51 with no issues. Then I did the second xbox 360 the same exact way and when I got to the part for the lite-on erase it locked up my computer and I had to restart.

Well after the restart for some reason my VIA6421 card would not show up in my device manager. Not sure why. So I tried and tried and tried to get it to show up and what I ended up doing is installing .net framework 3.5 and for some reason that made my e080 port come back to life in jungleflasher.

Only issue is when I turn on the 360 now it automatically flashes the power button and when I try to boot into windows it just hangs during start up and I just can't figure out how to flash it again. All the keys, dummy file and hacked.bin were made perfectly before the pc froze.

If anybody's got any help on this that would be great. Let me know if you need anymore details or things to try and I will give it a shot. If worse comes to worse I will just spoof it to a samsung.

[InanZen]

this is common, read some forums

you have to flash it in dos (startup disc to boot computer in dos)

[sguse5]

Ah ok, sounds good bro. Thanks for jogging my memory. I will do some more research when I get time.

Yep your right bro....

"PC freezing issue:

If you were in windows and using Jungle Flasher and you have successfully got your key and created your firmware from your dummy.bin or even have got as far as getting your key, inquiry, and identify.bin files, then you should be ok, just make a dummy.bin and then make your liteon firmware!

So your pc froze? You were erasing your liteon and then when you did the power cycle, your PC froze? Well you are in luck. As long as your key, inquiry, and identify.bin files were correct, then you can save your drive. What will happen at this point is your drive will no longer eject, so you think oh no bricked drive. This can be fixed. Make sure you can boot to DOS by floppy or USB drive and have the proper files on it.

You will need L-O-Eras.exe, latest dosflash16, and your hacked firmware file. Well what you do, restart your PC with your liteon connected, but not powered on, boot to DOS. Once you get to DOS restore power to your liteon drive. Go to where your files are.

Type L-O-Eras SATAPORT <-- put in your sata port that your drive is connected too. If you don't know your sata port, you can do dosflash really fast and figure out which port has the liteon drive on it. So after you do L-O-Eras SATAPORT you should return status FF72 I believe. I haven't had to do this way for awhile so if I made a mistake on the status please PM me so I can fix this. After you do this, go type DOSFLASH, then enter the proper # for the port that has the liteon drive on it. Then type W for write. Then enter your hacked firmware file, usually lite_cfw.bin then it will erase and write the firmware to your drive. After it is done, turn the power off on your drive, then turn it back on and press eject and if it does, problem solved!

Now you have flashed your firmware to your Liteon drive, put your system back together and test a backup."

I will give that a shot when I get home.