Print

[lebthug]

If the drive is functioning properly and the firmware on it is a modified firmware, there is an alternative to doing the 10 second trick. Look for and download an image file for the "0800 enable disc", it's only 2MB zipped but expands to be a lot bigger, burn it on a DVDR-DL disc.

When u want to read or flash your drive, power it on, then insert the 0800 disc, it will spin up and the firmware will be accessible for read and write, no need to power cycle or anything. After u power up and insert the disc, just start dosflash32 or jungleflasher and you will be able to read and write, hassle free.

That's what I do with my ms28 and it works every time, but it does not work on stock firmware, only if you already have a modded firmware and you're upgrading.

[bluto20]

QUOTE(lebthug @ Mar 16 2009, 11:58 PM)

If the drive is functioning properly and the firmware on it is a modified firmware, there is an alternative to doing the 10 second trick. Look for and download an image file for the "0800 enable disc", it's only 2MB zipped but expands to be a lot bigger, burn it on a DVDR-DL disc.

Not true. I just got done updating my M28 from 1.4 to 1.51 15 minutes ago using JungleFlasher w/o having to burn that 0800 disc.

This post has been edited by bluto20: Mar 17 2009, 09:00 AM

[KakarotX]

Just wanted to give an update. somehow jungle flasher erased my firmware instead of reading it, so i have lost my key. and the really good part is that it is not my 360 but a friends so now i have to buy him a new one.

does anybody know of a way to get the key off the motherboard or know of anyone who can do it. thanks for all your help.

[syntaxerror329]

No one has been able to get key from motherboard after drive is damaged.


This post has been edited by syntaxerror329: Mar 19 2009, 09:57 PM