xboxscene.org forums

Author Topic: Jungleflasher 1.51 Error....... Help  (Read 62 times)

jebise1001

  • Archived User
  • Newbie
  • *
  • Posts: 21
Jungleflasher 1.51 Error....... Help
« on: March 09, 2009, 10:37:00 PM »
I have a lite-on flashed with ix 1.5 trying to upgrade to 1.51, running 32 bit vista ultimate, Intel ICH8R/ICH9R chipset and PortIO32 installed manually. Using my xbox as the power. Alright so i have everything connected , i then turned on my pc and powered the xbox and pressed the eject button and pressed it again and puled the drive power and the plugged it back in, xbox blinking green and dvd tray open half way.


Open jungle flasher and get the following error "no components where found during enumeration!" and i cannot find my drive. How can i fix this?




This post has been edited by jebise1001: Mar 10 2009, 05:46 AM
Logged

hardie

  • Archived User
  • Sr. Member
  • *
  • Posts: 420
Jungleflasher 1.51 Error....... Help
« Reply #1 on: March 09, 2009, 10:40:00 PM »
you eject once then turn power off push tray in about halfway then power on again
Logged

jebise1001

  • Archived User
  • Newbie
  • *
  • Posts: 21
Jungleflasher 1.51 Error....... Help
« Reply #2 on: March 09, 2009, 10:45:00 PM »
from reading the guide from jungleflasher that's what i did. i pressed the eject button and then i pressed it again and as the drive was closing i pulled the drive power and put the tray half way in, plugged the drive power back in and started jungleflasher. But nothing found and i keep getting that error i mentioned in my first post.
Logged

jebise1001

  • Archived User
  • Newbie
  • *
  • Posts: 21
Jungleflasher 1.51 Error....... Help
« Reply #3 on: March 10, 2009, 11:43:00 AM »
anyone?

its been 2 days i cant figure out what that means
Logged

uradodah

  • Archived User
  • Jr. Member
  • *
  • Posts: 58
Jungleflasher 1.51 Error....... Help
« Reply #4 on: March 10, 2009, 02:56:00 PM »
QUOTE(jebise1001 @ Mar 10 2009, 12:19 PM) *

anyone?

its been 2 days i cant figure out what that means

I don't have a LiteOn but I'll add my opinion.  Feel free to disagree since I have no experience with LiteOn's... (IMG:style_emoticons/default/huh.gif)

1.  It's probably best if you eliminate any risk of making a mistake regarding ModeB by just ejecting the drive, leaving the drive *open*, pull the power plug from the wall, plug it back in and move on.  I suppose it's possible that you might be allowing the door to close too far which could cause an issue.  Admittedly, this is just a guess.
2.  I, too, use Vista (Home Premium though) and got the same exact error message from JF *every time* I opened it.  No worries though...as long as you know *for certain* that the drive is in ModeB ahead of time.
3.  JF worked much better for me when I made 2 adjustments:  ~changed it's properties (right-click JF's .exe) and changed it to work in compatibility mode for XP SP2 - and - ~started JF by right-clicking the .exe and selecting 'Run as Admin...'.  It seemed to work much better after doing so.

From there, since I don't have any experience with LiteOn drive, I can't offer any additional info.  Hopefully, something I mentioned above will provide a little assistance.  

If not, well, I tried. (IMG:style_emoticons/default/sad.gif)

Good luck!
Logged

jebise1001

  • Archived User
  • Newbie
  • *
  • Posts: 21
Jungleflasher 1.51 Error....... Help
« Reply #5 on: March 10, 2009, 02:36:00 PM »
i don't think there is a mode B for lite-on's. But if your getting that error message that i'm getting but still able to flash then maybe i'm doing something wrong, but until i know for sure, So please tell me you where able to flash you drive even with that error.

Any help would be great
Logged