Topic: Updating Firmware (Read 38 times)

blackg1000 · « **on:** March 03, 2009, 05:36:00 AM »

Hi,

I have recently done a BENQ to 1.41 and Liteon to 1.5, how do I go about updating them to 1.6?

I used Iprep 101 and booted from a usb pen and used MTK vendor to do the BENQ and I used Jungleflash to read the Liteon but DOSFLASH to erase and write the firmware.

I found DOSFLASH pretty straight forward to use so correct me if I am wrong but could I just use DOSFLASH on both drives and erase then write the new 1.6 firmware?

I still have the original keys for the Liteon but I don't have them for the BENQ.

I've never done an update before so any tips would be greatly appreciated.

Many Thanks,

ToBbErT · « **Reply #1 on:** March 03, 2009, 05:39:00 AM »

1.6 hasnt been released yet..........And why is that benq running on 1.41? It should be 1.5.

blackg1000 · « **Reply #2 on:** March 03, 2009, 05:48:00 AM »

It was because the BENQ is used offline and it's dead easy using Iprep instead of the CK3 I used for the Liteon.

I'll wait nearer the time until 1.6 is actually released and see where I go from there.

At least now that I have two firmware types I can see if any of them will fail when the new security is in full swing.

Cheers,

ToBbErT · « **Reply #3 on:** March 03, 2009, 05:40:00 AM »

What do you mean with new security?They don't release 1.6 for a new security.Here's some info if your interested : http://forums.xbox-s...howtopic=678243

Proppo · « **Reply #4 on:** March 03, 2009, 11:25:00 AM »

JungleFlasher...... I'd use that to flash

No ApOloGi3s · « **Reply #5 on:** March 06, 2009, 02:30:00 AM »

QUOTE(blackg1000 @ Mar 3 2009, 01:48 PM)

It was because the BENQ is used offline and it's dead easy using Iprep instead of the CK3 I used for the Liteon.

I'll wait nearer the time until 1.6 is actually released and see where I go from there.

At least now that I have two firmware types I can see if any of them will fail when the new security is in full swing.

Cheers,

What i dont get is how i can flash a Lite-on
ive read a lot but dont seems to get it :S
can i flash the Lite-on with out the CK3 ?
and only use a program ?

i cant seem to find out how to flash it without The probe CK3
Maybe some one can help me with a little explaition on what i need ?
i can flas al other types of drives !

ToBbErT · « **Reply #6 on:** March 11, 2009, 05:21:00 AM »

If your dvd rom is still original (not flashed) you need a connectivity kit and a spear/probe to read the key.If you allready flashed your dvd rom to 1.5 (wich you have) you will only need a sata connection to read,erase,and write.And of course you will need a power source

Author Topic: Updating Firmware (Read 38 times)