Print

[jack_herer]

QUOTE(GiampyXBS @ Jan 28 2009, 12:42 AM)

May exist a drive with only "A1" firm rev. and different "S4P8" serial number length?

I don't think so. check your spoofed fw and A0 A1 will be always located in the serial string.
my opinion is that complete string should be 20 chars length, but it's impossible to know for sure,
because ixtreme serial has 18 chars, but that string -seems- to be missing of 2 chars...

[WildBomber]

QUOTE(wendy360 @ Jan 28 2009, 04:21 AM)

i did get a message in jungleflasher. i hexed the dummy file.

after 1ff00 which is the the drive key or whatever

all i see are YYYYYYY from 1ff10 to 1ff40 and there is a A0 and A1 in between; So this means that my dummy.bin is incomplete right?

Since i did not flash it my self, what can i do? i don't really want to open the xbox and the drive to get all the info. I do not think the modder that this for me will do this. It was to much hassel then it was worth to do it myself. It would have cost me the same amount of money to buy all the equipment and flash it. Or i just pay someguy the same amount of money and get it done without the hasselso somthing not working or mebreaking the xbox.

If you don't want to open your drive and follow the information given by GiampyXBS, then your only other option is to sell it for the same price as it would cost you to buy a new Xbox, plus the amount it would cost you to get it flashed and do it again, this time bringing this thread to your flasher's attention.

[wendy360]

yeah that sounds like a good idea, but who is to say that this means that i will get banned for sure? I think this is not a big threat beacsue if M$ could read this then why can't they read other things about the FW and ban people, If M$ could read the drive FW then this would not matter as they would just check other things that are different from the original to ban people.

This post has been edited by wendy360: Jan 28 2009, 04:11 AM

[GiampyXBS]

QUOTE(wendy360 @ Jan 28 2009, 03:21 AM)

all i see are YYYYYYY from 1ff10 to 1ff40 and there is a A0 and A1 in between; So this means that my dummy.bin is incomplete right?

Sorry, yes  

QUOTE(wendy360 @ Jan 28 2009, 03:21 AM)

Since i did not flash it my self, what can i do? i don't really want to open the xbox and the drive to get all the info. I do not think the modder that this for me will do this. It was to much hassel then it was worth to do it myself. It would have cost me the same amount of money to buy all the equipment and flash it. Or i just pay someguy the same amount of money and get it done without the hasselso somthing not working or mebreaking the xbox.

To flash your liteon, you need only a sata PC (or a sata card) and your drive data(key,inquiry,identify and dummy).
Someone say that have bad serials data it's not a problem, but if you like to restore them you need to open your box!

[calloused labia]

That is pimp!

[OggyUK]

Quick Noob guide to identifying and repairing.

Good dummy.bin shown in JFv043b

(IMG:http://i330.photobucket.com/albums/l432/OggyBST/goodummy.jpg)

Area shown in a Hex editor

(IMG:http://i330.photobucket.com/albums/l432/OggyBST/01ff00areagood.jpg)

Same Dummy, with 01ff00 missing

(IMG:http://i330.photobucket.com/albums/l432/OggyBST/baddummy.jpg)

BAD 01ff00 area in Hex Editor

(IMG:http://i330.photobucket.com/albums/l432/OggyBST/01ff00areabadJPG.jpg)

Note the Red FF FF's

Replace with data found here

(IMG:http://i330.photobucket.com/albums/l432/OggyBST/n1222230561_292267_7458.jpg)

And, here

(IMG:http://i330.photobucket.com/albums/l432/OggyBST/n1222230561_292266_35922.jpg)

Simply replace these values over the red areas shown, save, then use as source

[UseN3t]

Dummy.bin says this:


0000: 44 36 30 38 43 47 38 32 - 34 38 30 39 30 42 4B 39 D608CG8248090BK9
0010: 30 20 20 20 FF FF FF FF - FF FF FF FF FF FF FF FF 0   ............
0020: FF FF FF FF FF FF FF FF - 41 30 FF FF FF FF FF FF ........A0......
0030: FF FF FF FF FF FF FF FF - FF FF FF FF FF FF FF FF ................
0040: FF FF FF FF FF FF FF FF - FF FF FF FF 41 31 FF FF ............A1..

but when i press spoof source to firmware, jf says this:


0000: 44 36 30 38 43 47 38 32 - 34 38 30 39 30 42 4B 39      D608CG8248090BK9
0010: 30 20 20 20 FF FF FF FF -   38 47 33 31 30 37 35 30 0    ....8G310750
0020: 31 37 45 34 31 34 58 58 - 41 30 FF FF 53 34 50 38        17E414XXA0..S4P8
0030: 38 31 34 30 30 30 30 30 - 31 31 34 34 34 33 00 00        81400000114443..
0040: FF FF FF FF FF FF FF FF -     FF FF FF FF 41 31 FF FF           ............A1..

Is the drive flashed with the correct serial, or do i need to dissamble it again?

Program I used to get the key, inquiry & identify: xtractor reader 2.7
Program I used to make the dummy.bin:  JFv043b

Thanks in advance,

[OggyUK]

QUOTE(UseN3t @ Jan 28 2009, 12:34 PM)

Dummy.bin says this:
0000: 44 36 30 38 43 47 38 32 - 34 38 30 39 30 42 4B 39 D608CG8248090BK9
0010: 30 20 20 20 FF FF FF FF - FF FF FF FF FF FF FF FF 0   ............
0020: FF FF FF FF FF FF FF FF - 41 30 FF FF FF FF FF FF ........A0......
0030: FF FF FF FF FF FF FF FF - FF FF FF FF FF FF FF FF ................
0040: FF FF FF FF FF FF FF FF - FF FF FF FF 41 31 FF FF ............A1..

but when i press spoof source to firmware, jf says this:
0000: 44 36 30 38 43 47 38 32 - 34 38 30 39 30 42 4B 39      D608CG8248090BK9
0010: 30 20 20 20 FF FF FF FF -   38 47 33 31 30 37 35 30 0    ....8G310750
0020: 31 37 45 34 31 34 58 58 - 41 30 FF FF 53 34 50 38        17E414XXA0..S4P8
0030: 38 31 34 30 30 30 30 30 - 31 31 34 34 34 33 00 00        81400000114443..
0040: FF FF FF FF FF FF FF FF -     FF FF FF FF 41 31 FF FF           ............A1..

Is the drive flashed with the correct serial, or do i need to dissamble it again?

Program I used to get the key, inquiry & identify: xtractor reader 2.7
Program I used to make the dummy.bin:  JFv043b

Thanks in advance,

A couple of big giveaways that its not correct.

1 - It wasnt present in Source, so, YOUR unique data couldnt have been copied

2 - You used Xtractor Reader - this doesnt issue the cdb's to get 01ff00 data in full - Its been discussed many times before that you shouldnt obtain data using this

3 - JungleFlasher states when loading that all serial data isnt present when loading key/inq/ident and tells you what to use to dump again.

[WildBomber]

Using OggyUK's serial section as an example, when I manually restored 1 of my incomplete dummy files, the last part in row 0030 reads FF FF instead of 00 00.

For example:

0000: 44 36 30 38 43 47 38 33 - 32 39 30 33 30 30 45 39 D608CG83290300E9
0010: 30 20 20 20 FF FF FF FF - 38 47 32 35 30 37 30 34 0 ....8G250704
0020: 31 37 41 33 31 34 58 58 - 41 30 FF FF 53 34 50 38 17A314XXA0..S4P8
0030: 38 30 31 30 30 30 30 30 - 31 33 36 31 32 32 FF FF 80100000136122..
0040: FF FF FF FF FF FF FF FF - FF FF FF FF 41 31 FF FF ............A1..

instead of

0000: 44 36 30 38 43 47 38 33 - 32 39 30 33 30 30 45 39 D608CG83290300E9
0010: 30 20 20 20 FF FF FF FF - 38 47 32 35 30 37 30 34 0 ....8G250704
0020: 31 37 41 33 31 34 58 58 - 41 30 FF FF 53 34 50 38 17A314XXA0..S4P8
0030: 38 30 31 30 30 30 30 30 - 31 33 36 31 32 32 00 00 80100000136122..
0040: FF FF FF FF FF FF FF FF - FF FF FF FF 41 31 FF FF ............A1..

which all the examples of complete dummy files seem to show.

I've opened up 1 of my complete dummy files in a hex editor to test, and again it shows the values 00 00 in that particular section. Is there anything I'm doing wrong? How do I get it to read 00 00 instead of FF FF?

[Demonmirc]

QUOTE(UseN3t @ Jan 28 2009, 12:34 PM)

Dummy.bin says this:
0000: 44 36 30 38 43 47 38 32 - 34 38 30 39 30 42 4B 39 D608CG8248090BK9
0010: 30 20 20 20 FF FF FF FF - FF FF FF FF FF FF FF FF 0   ............
0020: FF FF FF FF FF FF FF FF - 41 30 FF FF FF FF FF FF ........A0......
0030: FF FF FF FF FF FF FF FF - FF FF FF FF FF FF FF FF ................
0040: FF FF FF FF FF FF FF FF - FF FF FF FF 41 31 FF FF ............A1..

but when i press spoof source to firmware, jf says this:
0000: 44 36 30 38 43 47 38 32 - 34 38 30 39 30 42 4B 39      D608CG8248090BK9
0010: 30 20 20 20 FF FF FF FF -   38 47 33 31 30 37 35 30 0    ....8G310750
0020: 31 37 45 34 31 34 58 58 - 41 30 FF FF 53 34 50 38        17E414XXA0..S4P8
0030: 38 31 34 30 30 30 30 30 - 31 31 34 34 34 33 00 00        81400000114443..
0040: FF FF FF FF FF FF FF FF -     FF FF FF FF 41 31 FF FF           ............A1..

Is the drive flashed with the correct serial, or do i need to dissamble it again?

Program I used to get the key, inquiry & identify: xtractor reader 2.7
Program I used to make the dummy.bin:  JFv043b

Thanks in advance,

I could be wrong but from memory I think that may be the serial info contained in the Lite on firmware. Open the target firmware (Lite on 1.5ixtreme)in Jf and check info. That happened to me on 1 spoofing where the ixtreme info was placed in my Dummy.bin info.

[calloused labia]

QUOTE(Demonmirc @ Jan 28 2009, 09:04 AM)

I could be wrong but from memory I think that may be the serial info contained in the Lite on firmware. Open the target firmware (Lite on 1.5ixtreme)in Jf and check info. That happened to me on 1 spoofing where the ixtreme info was placed in my Dummy.bin info.

Yeah you are right.

I opened the LIteon ixtreme as target in JF and there was valid serial info in there. I then used a dummy without a serial as source and spoofed.The serial information in the target firmware stayed the same.

When I did the same steps using a dummy.bin with valid serial as a source, the target serial was over written.

[jt1]

Anyone think there will be a CLI release to fix dummy.bin?

[jt1]

I wish I could edit my posts, (mod merge?)
Right I found:
On your DVD case you have a HW ver, mine reads A0A1. Within my dummy.bin A0 and A1 are present.
My drive serial is 17 characters. However only 16 are present in my dummy.bin. The last char on my sticker is a 1. On the dummy.bin it is a 0
I know its mentioned in the first post, but no-one has elaborated, why this happens?
Has anyone else got 1 on there serial changed to a 0?

@WildBomber: I got that also, oggy's ss shows a (.) for FF values, where my hex editor shows Y values as the text string. However 00 is also a . so you will no see any differnace when using text only. Simply change the hex value to 00 00, hope that makes sense.



This post has been edited by jt1: Jan 28 2009, 09:08 PM

[pricemeista33]

QUOTE(jt1 @ Jan 28 2009, 10:33 PM)

I wish I could edit my posts, (mod merge?)
Right I found:
On your DVD case you have a HW ver, mine reads A0A1. Within my dummy.bin A0 and A1 are present.
My drive serial is 17 characters. However only 16 are present in my dummy.bin. The last char on my sticker is a 1. On the dummy.bin it is a 0
I know its mentioned in the first post, but no-one has elaborated, why this happens?
Has anyone else got 1 on there serial changed to a 0?

@WildBomber: I got that also, oggy's ss shows a (.) for FF values, where my hex editor shows Y values as the text string. However 00 is also a . so you will no see any differnace when using text only. Simply change the hex value to 00 00, hope that makes sense.

This is crazy as the 360Xtractor tool has jumbled all of my information up like the serial number. It completely changed the last 7 characters and rearranged my model no., HW Ver., and FW Ver. for example: I have FW ver. 74850C, but when I opened it up in Hex Workshop, I see 4508C7 and the same for the other information. I need a tut on what needs to be done in Hex Workshop though so I can edit the information as it should appear for the mobo to recognize.

Hey Oggy if you know which information is suppose to go first and which is to precede please post.

[WildBomber]

QUOTE(pricemeista33 @ Jan 29 2009, 02:40 AM)

This is crazy as the 360Xtractor tool has jumbled all of my information up like the serial number. It completely changed the last 7 characters and rearranged my model no., HW Ver., and FW Ver. for example: I have FW ver. 74850C, but when I opened it up in Hex Workshop, I see 4508C7 and the same for the other information. I need a tut on what needs to be done in Hex Workshop though so I can edit the information as it should appear for the mobo to recognize.

Hey Oggy if you know which information is suppose to go first and which is to precede please post.

Dude just read the first post, explains everything.