Print

[GiampyXBS]

I'm happy to help some of you...but just another question...

Is there someone that have this "particular" type of dummy.bin (at 0x1ff00):

CODE

0000: 44 36 30 38 43 47 38 33 - 30 38 31 30 30 30 57 35 D608CG83081000W5
0010: 31 20 20 20 FF FF FF FF - 38 47 30 39 31 36 31 38 1   ....8G091618
0020: 31 37 32 35 31 34 58 58 - A1 89 FF FF 53 34 50 38 172514XX....S4P8
0030: 37 32 33 30 30 30 30 30 - 31 37 39 39 31 37 36 34 7230000017991764
0040: FF FF FF FF FF FF FF FF - FF FF FF FF 41 31 FF FF ............A1..

It's particular because:
1) "A0" is missing after "XX"
2) The S4P8... sn is 20 chars length

If so...can check what's write on the sticks and post a result?
Thank you!

[jt1]

Thankyou GiampyXBS, looking forward for the outcome!

[dangerpaki]

so guys if i used JF to read my key and saved my key, inquiry and identify. but did not generate a dummy.bin immidiately. but did this later on in the "firmwaretool 32"tab by using the "load from dump files" button. will that be fine???

I used the first version of JF, should i be save or do i have these problems in my firmware as well?

[podger]

dangerpaki:

that "load from dump files" has moved... Unfortunately, it was incorrectly used in tutorials. It is only intended for picking up old files..

Good news tho with Giampy discovery, you can rebuild you serial data, if you are willing to open your DVD drive...

[Vauxfan]

Off topic: I wonder what happens when the QR barcode is scanned with a Nokia Mobile phone.

[OggyUK]

My N95 didnt pick them up, first thing I tried

[jack_herer]

"A0" probably is not necessary as it's already locate in ixtreme fw...

[Vauxfan]

QUOTE(OggyUK @ Jan 27 2009, 11:53 PM)

My N95 didnt pick them up, first thing I tried

Hmm, wonder what they are there for then.

[GiampyXBS]

QUOTE(jack_herer @ Jan 27 2009, 10:57 PM)

"A0" probably is not necessary as it's already locate in ixtreme fw...

"A0A1" is also the firm revision on the stick,it has its own sense...the goal is to reproduce the original complete sn.
May exist a drive with only "A1" firm rev. and different "S4P8" serial number length?

Noone has the strage dump above in the dummy.bin?
Came on people, don't be shy...

[wendy360]

i am not to sure what this means to me. I have dummy.bin, hacked.bin, key.bin, identify.bin  and inquiry.bin. I did not do it my self but had a modder do it for me as i didn't want to take a chance at my first 360. So am i safe? as i can see from reading the posts is that dummy.bin = drive serial. So if i have the dummy files then i still should be alright.

edit

i reread the thread so it dose not matter if i have a dummy file, as it maybe incomplete. How can i check this if mine is incomplete or complete?


P.S I thought that M$ can't read the firmware so if they can't then this is not needed. correct me if i am wrong!!

This post has been edited by wendy360: Jan 28 2009, 02:42 AM

[WildBomber]

QUOTE(wendy360 @ Jan 28 2009, 03:29 AM)

i am not to sure what this means to me. I have dummy.bin, hacked.bin, key.bin, identify.bin  and inquiry.bin. I did not do it my self but had a modder do it for me as i didn't want to take a chance at my first 360. So am i safe? as i can see from reading the posts is that dummy.bin = drive serial. So if i have the dummy files then i still should be alright.

edit

i reread the thread so it dose not matter if i have a dummy file, as it maybe incomplete. How can i check this if mine is incomplete or complete?
P.S I thought that M$ can't read the firmware so if they can't then this is not needed. correct me if i am wrong!!

Load up the latest JungleFlasher (0.0.43 Beta), select the tab ‘Firmware Tool 32’ and click ‘Load Source Firmware’ on the right hand side. Select your Dummy.bin, and if you get a message saying ‘Dummy.bin is missing some drive specific information’ you’re Dummy is incomplete.

[pricemeista33]

I posted this question about 3 days ago but can't seem to locate it in the forums to check for any responses. I asked this same question concerning the "serial information" within the dump. I have compared information from three or four different dumps and found out that there was indeed a difference in the key info located in the serial. I don't know why this was or what caused it or anything but wish for someone to pinpoint what the cause is. Now I'm having the E65, 66 error when I successfully flash my MS25 to a Lite-On as Jungle Flasher verifies the write as OK. Dunno what's the freakin problem but I want to use my MS25 as my Lite-On is jacked and I thought that the key, identify, and inquiry files were extracted properly with "360Xtractor" or maybe this software is definitely the problem. I really need to know if I can hex edit specific information in order for my drive to operate properly.

[WildBomber]

Alternatively you can put the latest Firmtool (1.3.1 I think) and Make iXtreme firmware.bat in the same folder as your Dummy.bin and hacked iXtreme Lite-on firmware. Double click Make iXtreme firmware.bat, follow the instructions, and if you get:

***Warning***
Lite-on serial appears to be partially incomplete.

You have an incomplete Dummy.bin.


The question is how does one avoid this and ensure a complete serial extraction every time?

[GiampyXBS]

QUOTE(wendy360 @ Jan 28 2009, 02:29 AM)

...
P.S I thought that M$ can't read the firmware so if they can't then this is not needed. correct me if i am wrong!!

if you are sure, then why you worry about this?
the reality is that we know very little about microsoft checks (apart the fact that the LiteOn seems to be not dumpable (is it true?...may be...or not...))

QUOTE(WildBomber @ Jan 28 2009, 03:01 AM)

Load up the latest JungleFlasher (0.0.43 Beta), select the tab ‘Firmware Tool 32’ and click ‘Load Source Firmware’ on the right hand side. Select your Dummy.bin, and if you get a message saying ‘Dummy.bin is missing some drive specific information’ you’re Dummy is incomplete.

...or manually open your dummy.bin with an hex editor at 0x1ff00 and read the first post

[wendy360]

i did get a message in jungleflasher. i hexed the dummy file.

after 1ff00 which is the the drive key or whatever

all i see are YYYYYYY from 1ff10 to 1ff40 and there is a A0 and A1 in between; So this means that my dummy.bin is incomplete right?

Since i did not flash it my self, what can i do? i don't really want to open the xbox and the drive to get all the info. I do not think the modder that this for me will do this. It was to much hassel then it was worth to do it myself. It would have cost me the same amount of money to buy all the equipment and flash it. Or i just pay someguy the same amount of money and get it done without the hasselso somthing not working or mebreaking the xbox.

This post has been edited by wendy360: Jan 28 2009, 03:26 AM