xboxscene.org forums

Author Topic: Have I Bricked My Lite On  (Read 40 times)

headonism

  • Archived User
  • Full Member
  • *
  • Posts: 115
Have I Bricked My Lite On
« on: January 24, 2009, 06:32:00 PM »
i hav backed up all 3 bins but using jungle flasher in xp i tried to erase my flash when i did this my pc locked up for a good while about 25mins as i didnt want to nought wrong i waited this long.

after so long i thought that it had crashed so i rebooted, now when xp reloaded i noticed that my xtractor would eject my drive whrn i turn it on then i noticed that the computer kept freezing when ever the xtactor was on so i removed the sata cable from my drive and my pc began moving again now when ever i put my drive on with sata connected my pc freeze regardless of if im using the drive or not.
Logged

ruley

  • Archived User
  • Sr. Member
  • *
  • Posts: 286
Have I Bricked My Lite On
« Reply #1 on: January 24, 2009, 06:41:00 PM »
QUOTE(headonism @ Jan 25 2009, 11:38 AM) View Post

i hav backed up all 3 bins but using jungle flasher in xp i tried to erase my flash when i did this my pc locked up for a good while about 25mins as i didnt want to nought wrong i waited this long.

after so long i thought that it had crashed so i rebooted, now when xp reloaded i noticed that my xtractor would eject my drive whrn i turn it on then i noticed that the computer kept freezing when ever the xtactor was on so i removed the sata cable from my drive and my pc began moving again now when ever i put my drive on with sata connected my pc freeze regardless of if im using the drive or not.

Have you read the pinned topics up the top of this forum. It may help you.
Logged

Ranger72

  • Archived User
  • Hero Member
  • *
  • Posts: 3746
Have I Bricked My Lite On
« Reply #2 on: January 24, 2009, 06:55:00 PM »
Logged

headonism

  • Archived User
  • Full Member
  • *
  • Posts: 115
Have I Bricked My Lite On
« Reply #3 on: January 24, 2009, 07:42:00 PM »
thanks guys i have got my drive reading again and ran than the customer firmware but i think i have well and trully F*%$ed it.....

i put it back together again the tried to read my back up i have and i got the message

PLEASE INSERT AND XBOX GAME INTO THIS CONSOLE

so i put the original game in same as the backup HALO 3

and got the same message.....

is there anything that i can do with this drive now sad.gif
Logged

Ranger72

  • Archived User
  • Hero Member
  • *
  • Posts: 3746
Have I Bricked My Lite On
« Reply #4 on: January 24, 2009, 07:48:00 PM »
The drives firmware does not contain the proper drive key for that console.

Open your dump files and make sure you have the proper drive key for that console. Make a new hacked bin file and flash it to the liteon.
Logged

headonism

  • Archived User
  • Full Member
  • *
  • Posts: 115
Have I Bricked My Lite On
« Reply #5 on: January 25, 2009, 02:51:00 AM »
i have all the original bins for that drive so how do i make the key with this.

Logged

headonism

  • Archived User
  • Full Member
  • *
  • Posts: 115
Have I Bricked My Lite On
« Reply #6 on: January 25, 2009, 05:30:00 AM »
JungleFlasher 0.0.26 Beta
Session Started Sun Jan 25 11:16:45 2009


Found 13 I/O Ports.
Found 2 Com Ports.
Found 9 windows drives.
Found 0 CD/DVD drives.


Getting Status from port 0xEC00
Invalid Status
Sending Vendor Outro to port 0xEC00
Sending Vendor Intro to port 0xEC00
Invalid Status
Re-sending Vendor Intro:
...........................................
Device Intro failed!
Sending Vendor Intro to port 0xEC00
Invalid Status
Re-sending Vendor Intro:
......................................................................
Device Intro failed!
Sending DVDKey request to I/O port 0xEC00 and COM3

................................

Serial Data OK! Key looks good
Your Key is: 55AA55AA55AA55AA55AA55AA55AA55AA

Sending Inquiry to I/O port 0xEC00

0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS    
0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S        
0020: 37 34 38 35 30 43 41 30 - 41 31 44 36 30 38 43 47 74850CA0A1D608CG
0030: 38 33 33 39 30 37 30 31 - 30 46 30 20 20 20 00 00 833907010F0   ..
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

Sending Inquiry to I/O port 0xEC00

0000: C0 85 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 44 36 30 38 - 43 47 38 33 33 39 30 37 ....D608CG833907
0020: 30 31 30 46 30 20 20 20 - 00 00 00 00 00 00 34 37 010F0   ......47
0030: 35 38 43 30 20 20 4C 50 - 53 44 20 20 20 20 47 44 58C0  LPSD    GD
0040: 31 2D 44 36 53 32 20 20 - 20 20 20 20 20 20 20 20 1-D6S2          
0050: 20 20 20 20 20 20 20 20 - 20 20 20 20 20 20 00 00               ..
0060: 00 00 00 0B 00 00 00 04 - 00 02 06 00 00 00 00 00 ................
0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0080: 03 00 78 00 78 00 E3 00 - 78 00 00 00 00 00 00 00 ..x.x...x.......
0090: 00 00 00 00 00 00 00 00 - 02 02 00 00 68 00 40 00 ............h.@.
00A0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00B0: 20 20 00 00                                         ..            

Sending Serial data request to I/O port 0xEC00

0000: 44 36 30 38 43 47 38 33 - 33 39 30 37 30 31 30 46 D608CG833907010F
0010: 30 20 20 20 FF FF FF FF - 38 47 33 31 30 37 35 30 0   ....8G310750
0020: 31 37 45 34 31 34 58 58 - 41 30 FF FF 53 34 50 38 17E414XXA0..S4P8
0030: 38 31 34 30 30 30 30 30 - 31 31 34 34 34 33 00 00 81400000114443..
0040: FF FF FF FF FF FF FF FF - FF FF FF FF 41 31 FF FF ............A1..


Getting Status from port 0xEC00

Getting Status from port 0xEC00
Invalid Status

Getting Status from port 0xEC00
Invalid Status

Getting Status from port 0xEC00
Invalid Status
Sending Vendor Intro to port 0xEC00
Invalid Status
Re-sending Vendor Intro:
......................................................................
Device Intro failed!
Sending Vendor Intro to port 0xEC00
Invalid Status
Re-sending Vendor Intro:
........................................................................
Device Intro failed!


im getting some wierd messages now unknown flash chip and in jungle flasher i get the message above also
FLASH CHIP PROPERTIES im not getting no info yet i can read a key in dvdkey32 and i have all the original bins and made a dummy but just cant get it to see it

in DOSFLASH im getting 0x52 then it hangs when i press ESC it asks me where my drive once i say where it is it ask me to ® read (w) write) and so on but when i try to to this i get UNKNOWN FLASH CHIP what does this mean

Logged

0wn4g3

  • Archived User
  • Newbie
  • *
  • Posts: 10
Have I Bricked My Lite On
« Reply #7 on: January 25, 2009, 05:52:00 AM »
you didnt add your key in jungle flasher when u made the hacked firmware! thats the dummy key in the liteon firmware make it again add your key and reflash
Logged

headonism

  • Archived User
  • Full Member
  • *
  • Posts: 115
Have I Bricked My Lite On
« Reply #8 on: January 25, 2009, 05:54:00 AM »
QUOTE(0wn4g3 @ Jan 25 2009, 01:28 PM) View Post

you didnt add your key in jungle flasher when u made the hacked firmware! thats the dummy key in the liteon firmware make it again add your key and reflash


sorry but am i doing this in firmware tool 32 inside JFlasher
Logged

headonism

  • Archived User
  • Full Member
  • *
  • Posts: 115
Have I Bricked My Lite On
« Reply #9 on: January 25, 2009, 12:29:00 PM »
QUOTE(0wn4g3 @ Jan 25 2009, 01:44 PM) View Post

yes i no

you need to load your 3 files then open your liteon firmware copy then click spoof source to target and save file.  Make sure top key matches bottom key smile.gif

then reflash!



 biggrin.gif THANKS biggrin.gif  THANKS biggrin.gif  THANKS  biggrin.gif  THANKS  jester.gif

this did the trick after not being able to read any dvd for the past 16hours finally it works again

thanks to every 1 who had time to suggest solutions    biggrin.gif
Logged