Topic: DosFlash and DosFlash32 V1.7 Beta (Read 233 times)

Ave · « **Reply #15 on:** December 25, 2008, 12:33:00 AM »

Got it working by using my Xbox to power it, and not connecting it to the Xtractor. I also left the drive powered on before I booted my computer, and it then was able to be read in DOS so I could flash with dosflash.

PacinoAllstars · « **Reply #16 on:** December 25, 2008, 07:08:00 AM »

QUOTE(lugi @ Dec 25 2008, 12:57 PM)

What is the manual command for writing the fw?

Be sure to have your executor turned off when booting to dos, once when you are in dos you switch it on.

when it's on you typ 'dosflash'

it will give you a list with available ports, if you are doing it correct you will see a port with some extra information provided below, choose that port numer, next option menu you typ w, and after that you specify your firmware.bin file

Of course you must have your key extracted and drive erasedbefore doing the above.

lugi · « **Reply #17 on:** December 25, 2008, 01:02:00 PM »

I know that..i want a manual line..like there is one for dvdkey reading (DosFlash LITEON K CC00 1 inquiry.bin identify.bin key.bin dummy.bin) and erasing (DosFlash LITEON E CC00) because i want to create a .bat for writing..

PacinoAllstars · « **Reply #18 on:** December 25, 2008, 01:54:00 PM »

QUOTE(lugi @ Dec 25 2008, 10:38 PM)

I know that..i want a manual line..like there is one for dvdkey reading (DosFlash LITEON K CC00 1 inquiry.bin identify.bin key.bin dummy.bin) and erasing (DosFlash LITEON E CC00) because i want to create a .bat for writing..

Good question, i also tried that. The only thing I manually managed was to typ.

dosflash liteon e 0000 and i got erased, no @$@$@ idea how to specify the W parameter in that case.

bukta · « **Reply #19 on:** December 25, 2008, 09:45:00 PM »

I think it will works:

dosflash w 0000 1 a0 1 4 hacked.bin

(like read)

kondra · « **Reply #20 on:** December 26, 2008, 04:30:00 AM »

Writing works this way:
DosFlash W PORT 1 A0 2 0 4 C:\fw.bin 0

Look here for more info:
http://www.xboxhacke...g71033#msg71033

lugi · « **Reply #21 on:** December 26, 2008, 04:43:00 AM »

awsome..thnx

bukta · « **Reply #22 on:** December 26, 2008, 07:07:00 PM »

"...2 0 4 C:\fw.bin 0"

What is
2
0
4
and the last zero?

Brembo · « **Reply #23 on:** December 29, 2008, 07:04:00 PM »

Hi, Dosflash works with CK3+USB

Thanks

ruph · « **Reply #24 on:** January 15, 2009, 05:58:00 AM »

So do i still need to use Probe to extract the key in dos? Tutorial doesnt indicate anything about the use of Probe so i'm not exactly sure when to use it or if its even functional in dos mode.

for some reason, jungle flash wont allow me to Write after successfully extracting and erasing the lite-on drive. keeps giving me an invalid status error when i attempt to write to the drive. now i'm trying to use dos mode to flash the drive with the dummy extracted from jungle. is this possible?

sorry for the noobness.

Zarge · « **Reply #25 on:** February 21, 2009, 11:36:00 AM »

QUOTE(kondra @ Dec 26 2008, 01:06 PM)

Writing works this way:
DosFlash W PORT 1 A0 2 0 4 C:\fw.bin 0

Look here for more info:
http://www.xboxhacke...g71033#msg71033

That didnt work for me, maby i did it all wrong..
Whats all the numbers for?

I need to get the fw back to orginal, got the stupid ring..

Flanz · « **Reply #26 on:** April 01, 2009, 11:32:00 PM »

How do I boot dosflash in dos? Do I make a bootable disk and if so with what, iprep? Is there a way to open up dos in windows somehow? If you do use iprep where do I put the dosflash file and hacked fw on my thumbdrive and what about l-o-eras.exe i heard that was important

Hezam · « **Reply #27 on:** September 28, 2009, 02:28:00 PM »

Whn i write the port number it said Are you ready ? i write yes and it sadi "Invalid DVDKey" !!
Help please .....

chiribomb · « **Reply #28 on:** September 29, 2009, 12:54:00 AM »

QUOTE(Flanz @ Apr 2 2009, 06:32 AM)

How do I boot dosflash in dos? Do I make a bootable disk and if so with what, iprep? Is there a way to open up dos in windows somehow? If you do use iprep where do I put the dosflash file and hacked fw on my thumbdrive and what about l-o-eras.exe i heard that was important

Tell us what type of drive, what did you use to get your key, ect.
Sammy. and beng, and liteon, I use JF to get my dummy.bin and then use it to create the hacked firmware and save it to a file.
Like Liteon_CFW.bin as an example.
But I only use dosflash for liteons 74s., because it freezes when you go to erase or write.
So i use iprep to make a bootable thumb drive.
It will format and put two system files to make it a boot disk.
I add dosflash and LOerase to it for liteons.
You then must put the hacked firmware on it.
So the drive should have 5 files,
MSDOS
IOSYS
dosflash
loeras
Liteon_cfw.bin.

Go into you computer bios and make the thumb drive as the first boot device: USBdrive not HD or cdrom.
Also check to see that bios found the drive as PLDS on that sata connection if its a liteon.
IT should boot into the A prompt.
Run dos flash and it will show all devices on all ide and sata ports.
if it askes do you want to resend say No
If it does not show your drive or any sata ports try and have one other device on a sata channel to get it to look for those type of devices.
I choose number 5 as its the port with my liteon.
I choose LITEON E to erase the drive and then choose W and then type in Liteon_CFW and you should be done.
If you need more info check the sticky bricked liteon for more help

Author Topic: DosFlash and DosFlash32 V1.7 Beta (Read 233 times)