Print

[audi_a8]

RS232 Serial Port To TTL Converter Module MAX3232 V 1.0

this is all I need, right? I have  a pc with serial port.

+ some way to power dvd.
I already got the via pci card, ready to go.


thanx

[Teun.]

Great Work, Respect for Team Jungle!!

But i've a question about flashing a LiteOn.
If i flash in Windows and it freezes, is my drive bricked after freezing?
Or can i just try to flash it again in Dos?

[ruley]

QUOTE(biggy7 @ Dec 23 2008, 10:10 PM)

iPrep 1.5Def:  http://www.megaupload.com/?d=D5OBW7BS

Thanx worked a treat

[alexinfurs]

anyone konws if c4e will release the original firmware so we can restore it?

[OggyUK]

QUOTE(chenzhuops2 @ Dec 23 2008, 12:55 PM)

Can flash to write?

Yes, you probably used toolbox to insert key before.

No need for OFW, drive is locked once written.

[alexinfurs]

QUOTE(Teun. @ Dec 23 2008, 02:02 PM)

Great Work, Respect for Team Jungle!!

But i've a question about flashing a LiteOn.
If i flash in Windows and it freezes, is my drive bricked after freezing?
Or can i just try to flash it again in Dos?

erase and flash again.
but I suggest you to flash directly in dos

[dpbmt]

nice one TEAM JUNGLE  

easiest drive ive flashed so far!  

[pipniga]

QUOTE(Badger101 @ Dec 23 2008, 01:27 PM)

Just a quick question. (And probably a silly one!)

I've just downloaded it from xbins  

Is there any difference between the firmware files in the Dos folder and the ones in the root folder?

Thanks Team Jungle!!

According to MD5 Check, they are completely same.

[Craigsblackie]

Updated my Benq drive, all working great. Dosflash works with absolute ease, never been able to use any of the Windows tools though, they freeze of don't pick up the drive correctly, not a major hassle though - I'm a command line kinda guy.

[Dead Echo]

Have no clue where to begin when updating my BenQ. I've done it once and I used iPrep back then, seems like it's not working like it used to? Could anyone write up a brief tutorial how to flash a BenQ drive now ( With VIA Sata Card )

[JAN_VIII]

отличная работа, парни!!! хммм... хотя я не обладатель бокса, все равно, поздравляю! =)

[thorro]

QUOTE(aggybong @ Dec 23 2008, 01:34 PM)

This isn't working for me. I type 'dosflash', and then it tries to find which port it's on. Port 2 has MTK Vendor Intro failed on Port 0xb400. 0xb400 is what I used in Windows to get the key, so I'm fairly positive that's the correct port.

After selecting 2, it asks me what I want to do. I pick "W" and it then says "Unknown flash chip!"

What am I doing wrong now?

Power cycle the drive, then run dosflash again. Worked for me.

Team Jungle, great work!

[playerman]

QUOTE(antonchigurh @ Dec 23 2008, 12:29 PM)

No good.  I just tried to erase my firmware computer froze on me.  After reboot liteon drive will not respond.  I think its bricked.  I was using a via chipset.  I hope you guys can help me out.

I have similar problem.Ive used the option liteone erase and then it start doing something but after my computer froze so i think flash chip its not erased in full.windows doesnt boot when drive its connected.If i try hot plug on already booted winxp computer froze so i cannot erase again.dosflash is tying to do something but my drive doesnt want to give status 0x72 probably because its not erased in full(tried many times with power cycle).
command l-o-eras xxxx in dos doesnt do nothing(always status f80)
Any solution??Mayby somebody can make some kind of program to erase flash under dos or any other good solution for that.I hate windows wrrrr.... (IMG:style_emoticons/default/mad.gif)

This post has been edited by playerman: Dec 23 2008, 01:52 PM

[dpbmt]

all the information needed is in the read-me's,  dont see how you can go wrong.

[Champion]

FIRST OF ALL! THANK YOU!

Can you explaine:

Enhanced c/r timing - all drives
Enhanced disc jitter - all drives
Enhanced spoofing support for Liteon - Samsung and Benq
Enhanced bad angle support - all drives
Secret Liteon MS Inquiry cdb support - Samsung and Benq