Print

[pricemeista33]

Hey great shout outs to C4eva, Geremia, Schtrom, Redline99, and all the Scene Geniuses who have made it possible for us all to do great things with modern technology. You guys are the greatest and are appreciated to the utmost.

Thnx....

[harleywastaken]

QUOTE(antz1970 @ Jan 22 2009, 06:18 PM)

the via 530c drivers worked out fine for me with lite on , managed to do the whole lot with jungleflasher , no lock ups at all

just installed the drivers and did a lite-on, no problem... i assume you're still cycling the drive power after erase?

[sanguia1]

Have the key and files(which i got with dos32) browsed and put in all files in jungle for spoofing hit the open target firmware button and it says cant find ixtreme1.5 bin for the firmware which is on desktop. Been at it for days. I have vista help please i know people on here don't want to help but i tried everything took me forever to just get the key and files which was a pain in the butt. Not sure if i did that correctly cuz maximus didn't work in retrieving key nor jungle just work with dos 32. I installed all vista stuff I think. Please anybody have a good vista tutorial. I erased viamraid like tutuorials said.

This post has been edited by sanguia1: Jan 25 2009, 10:25 PM

[originalmacnut]

I haven't seen anyone Post this yet, so... or I missed it.

I just wanted to let the team know, Jungleflash .26B & .43B is working perfect on Windows 2003 Server,
no freezes at all. IOport installed fine with no problems either.

Have flashed all my family 360's now.
Thanks TEM JUNGLE for all your hard work
Cheers  
-OMN

[thedogfather]

Hi can someone help me i was using jungle flasher and i have the 4 file needed (key,id,dummy and so on) but when i got to the erase it froze and now when i switch on the drive my Pc freezes no mater what. I read in this forum to deleted via drive but when i go to earse i can't find port can someone help . i know that i should do it in dos but i don.t have a clue how to do that . i've tried but my Bios won't boot of usb flash pen. sorry to seen thick but when it comes to dos i am  please please help me .Xbox is my brothers and he has mine i want mine back been at this for days now i need sleep

This post has been edited by thedogfather: Jan 31 2009, 01:44 AM

[ch4676]

HELP! ok well let me start off like this. this is what i did step by step:
--pluged a SATA cable into my ASUS pl5-vm1394 SATA port onboard (intel chipset).
--pluged the other end into my benq VAD6038  64930c that is still pluged into the 360 to power up.
--tryed to run jungleflasher .43 got a drive not ready error, closed it down.
--tryed to run jungleflasher .26 worked fine no error.
--found my drive in mtk32 tab and clicked UNLOCK BENQ.
--then clicked device and then READ.
--it said done and i saved the original firmware bin file.
--next clicked firmware tool 32. and source , loaded orig. bin.
--then open target and loaded the benq IX15BENQ.
--then clicked spoof to target and saved the bin. file.
--then clicked the mtk 32 tab and WRITE.
--it said write ok so i clicked OUTRO. and closed the program.
--then powered off my drive and computer , unpluged everything , put it all back and it will not play games only dvd's STORE BAUGHT GAMES!!! and i have no idea what to do now i cant unlock it again or read it or anything because in the tut it says wont work on firmware 1.5 so what do i do now?
is it ok if i add the log i saved it but did not want to make anyone mad...
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~

JungleFlasher 0.0.26 Beta

Session Started Sun Feb 01 19:16:59 2009

Found 7 I/O Ports.
Found 1 Com Ports.
Found 7 windows drives.
Found 2 CD/DVD drives.

Sending Magic Keys to Drive on port 0x0xA000
............................
Done!

Sending Vendor Intro to port 0xA000

Serial flash found with Status 0x73

Sending Device ID request to port 0xA000

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name:  MXIC(MX25L2005)

Flash Size:  262144 bytes

Getting Status from port 0xA000

Serial flash found with Status 0x73

Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................

Benq Dump file saved to C:\Documents and Settings\a\Desktop\benq\BENQ-OFW.bin

Loading MTK_Flash source file

Inquiry string found

Identify string found

DVD key found @ 0xB030 key is 307F491E102116405E98D9515AA6BE40

Firmware is Benq OSIG: PBDS    VAD6038-64930C      

Firmware type is: Stock

Loading target file C:\Documents and Settings\a\Desktop\ixextreme\ixtreme15\ixtreme_1.5\ix15Benq.bin

Target File MD5 hash is:  a6d4c666c0014cadd0ca51c98cd3c80b

Genuine Benq iXtreme 1.5 Final

Inquiry string found

Identify string found

DVD key found @ 0xE030 key is 77777777777777777777777777777777

Firmware is Benq OSIG: PBDS    VAD6038-64930C      

Firmware type is: iXtreme v1.50-12x-FINAL        

Spoofing Target

DVD Key copied to target

Inquiry strings identical

Identify strings identical

0xFF00 area copied for Benq to Benq

Target f/w saved as: C:\Documents and Settings\a\Desktop\ixextreme\ixtreme15\hacked benq\Benq_CFW.bin



Getting Status from port 0xA000

SPi flash found with Status 0x73



Sending Chip Erase to Port 0xA000

Writing target buffer to flash

Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................



Flash Verification Test !

Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................

Write verified OK !
Sending Vendor Outro to port 0xA000

[Sweetol]

just a question. does microsoft check the installation of backup on hardisk? some risks about this?different checks for installation on Hardisk? or is all good with a good backup?otherwise,some risks with a bad backup (for example a backup burned with a burner device that not support bitsetting or bad kreon rip or bad splitvid)?

sorry for bad english..

This post has been edited by Sweetol: Feb 3 2009, 12:00 AM

[matycon]

QUOTE(ch4676 @ Feb 2 2009, 03:04 AM)

DVD key found @ 0xB030 key is 307F491E102116405E98D9515AA6BE40

Firmware is Benq OSIG: PBDS    VAD6038-64930C      

Firmware type is: Stock

Loading target file C:\Documents and Settings\a\Desktop\ixextreme\ixtreme15\ixtreme_1.5\ix15Benq.bin

Target File MD5 hash is:  a6d4c666c0014cadd0ca51c98cd3c80b

Genuine Benq iXtreme 1.5 Final

Inquiry string found

Identify string found

DVD key found @ 0xE030 key is 77777777777777777777777777777777

You issue has got to be those 7's. It doesnt look like your key was properly inserted into the hacked firmware.

It looks like you did actually get a clean key. (307F491E102116405E98D9515AA6BE40)
What i would do it open Ixtreme 1.5 in firmware toolbox, manually insert the key, then reflash. If that isnt the key then you are SOL my friend, and your box is bricked with a capital B.

[todd93]

I would just like to say that I have flashed my Lite-On drive using the 0.0.43.BETA version of Jungleflasher. Everything worked flawlessly, as it should, and I am a NOOB at flashing an Xbox 360. I have modded my original Xbox, but that is altogether a different animal. For the people that are having trouble I would say don't get too far ahead of yourself, I followed the instructions in the guide step by step and my flash went off the first time perfectly, the drive worked afterward, and everything is good. I would like to thank Team Jungle for this obviously difficult task that they have taken on with the Lite-On, the so called "unhackable" 360 drive. It just goes to show that you should never use the term "unhackable" when you describe something in this field, because people like Team Jungle will make you look like an idiot. This had to be a very difficult hack, and they pulled it off.

Thanks

Todd

[KineticX]

Nice, been waiting for a way to flash this drive for a few months now.

Did it today with CK3 kit and it's working great!

I've been flashing 360's since it started and people like TeamXecuter and Team Jungle never cease to amaze me (IMG:style_emoticons/default/biggrin.gif)

This post has been edited by KineticX: Feb 7 2009, 11:26 PM

[CanadianTSi]

I'm using Jungleflasher to try and read the key from my Liteon but as soon as I push Get Key my PC reboots. Anyone know what's going on?

[FireSokar]

glad you just posted your key for the world and ms to see.. Mods wanna edit it before he gets a ban on his 360 tomorrow.

[mbeno13]

Did I miss the Hitachi release at some point?  I thought it was going to released in early January and now it is early February.  Does anyone have an update on this?  Thanks.    

[_cloaked_]

QUOTE(mbeno13 @ Feb 11 2009, 12:04 AM)

Did I miss the Hitachi release at some point?  I thought it was going to released in early January and now it is early February.  Does anyone have an update on this?  Thanks.    

mbeno13, I signed on today thinking the same thing.  All my boxes ended up having hitachis, from 46-79.  I haven't played online because of still being at 1.4. But, I don't do live much anyways.  I was under the impression it was coming early January too but apparently not.  ixtreme 1.4 is doing just fine for my backups but I would like the latest and greatest version too haha.  If anyone has any information about ixtreme 1.5 for hitachi, could you share it with us who are patiently waiting? Thanks
_cloaked_

[mbeno13]

Let me tell you I appreciate the reply knowing that there are others patiently waiting like me haha.  I actually have never even modded mine yet so I don't even have 1.4 to hold me over.  i figured I would wait until 1.5 so it is def safe.  I actually just bought an arcade with a lite-on drive but I am a bit hesitant because I am not the best with this stuff.  I wouldn't really mind too much if my 3 yr old hitachi got messed up plus it should be easier.  Oh well hopefully soon...