Topic: Solderless Liteon Dvd Key Extractor From Diygadget.com (Read 1278 times)

coupedummy · « **Reply #45 on:** December 13, 2008, 09:16:00 PM »

interesting,i thinking of buying just the board and making my own spear tool to use with this board.
Can you tell me where the
A RS232 to TTL adapter solders to the board,which terminals in the TTL adaptor goes to which solder points on the back of the board and which terminal is the spear point?

It looks only three soldered points from the ttl adaptor go to either the board or spear,2 for board and 1 for spear so where do the other three soldered in the adaptor go?

thanks for this

osva · « **Reply #46 on:** December 13, 2008, 09:39:00 PM »

I made an order yesterday and it got cancelled, anyone else had this problem?

ashegam · « **Reply #47 on:** December 13, 2008, 09:40:00 PM »

still confused about 1 thing.

Is the USB to RS232 adapter a must have?

osva · « **Reply #48 on:** December 13, 2008, 09:45:00 PM »

QUOTE(ashegam @ Dec 14 2008, 01:16 AM)

still confused about 1 thing.

Is the USB to RS232 adapter a must have?

If you dont have a serial port on your computer, yes.

coupedummy · « **Reply #49 on:** December 13, 2008, 09:57:00 PM »

QUOTE(brisk @ Dec 12 2008, 12:47 AM)

sorry!

here you go:

IPB Image

The middle 2 pins of the molex are ground. The other one is +3.3, from the voltage regulator on the other side.

where do these go to in the the ttl adaptor?
im going to buying one of these which is labelled up
http://cgi.ebay.co.u...bayphotohosting

are the other three cables in the r232 adaptor just cut further down the cable??

looks likes just the molex ground and 3.3v is soldered under board and spear cable for reading drive,other three are cut further down the cable and are not used

wtfisausername · « **Reply #50 on:** December 13, 2008, 10:01:00 PM »

Nice!...How long was shipping and where are you located? I'm in California, USA and i wondering how long it takes for shipping...

thanks

Edit: Also you said FortIO32.exe when its PortIO32.exe

This post has been edited by wtfisausername: Dec 14 2008, 06:14 AM

mauiwaui · « **Reply #51 on:** December 13, 2008, 10:20:00 PM »

QUOTE(wtfisausername @ Dec 14 2008, 06:37 AM)

Nice!...How long was shipping and where are you located? I'm in California, USA and i wondering how long it takes for shipping...

thanks

Edit: Also you said FortIO32.exe when its PortIO32.exe

I also live in CA, made a order on the 9th and got it today 13th. Part of the eject casing was broken but nothing some crazy glue wouldn't fix. I'm waiting for something else in the mail but when I get it I'll attempt to do this and post back the results if any one is interested, will probably be next week.

lawdog247 · « **Reply #52 on:** December 13, 2008, 10:44:00 PM »

I ordered mine from the site about a week ago, they said it is shipped, yet I haven't seen it. I live in GA btw.

wtfisausername · « **Reply #53 on:** December 14, 2008, 02:39:00 PM »

QUOTE(fcukms2 @ Dec 13 2008, 05:05 PM)

Sorry meant 10$ more than this...

Not exactly. The DIY gadget one with the usb to serial adapter is $45.98 with free shipping to USA and Canada. Which is like the Connectivity Kit V3 PRO with the Spear which is like $64.98 without shipping. That is $19 difference + shipping. The DIY one also seem cheaply made without a power switch so idk if these will last long. But for people who dont want to solder or make their own spear and will probably use it on 1-3 drives and may need a Hard drive adapter, they should get the DIY one. But of course its your decision to get a better looking quality one and if you live in usa/canada...

This post has been edited by wtfisausername: Dec 14 2008, 10:42 PM

WTFudge · « **Reply #54 on:** December 15, 2008, 05:11:00 AM »

Has anyone in the UK recieved theirs yet? Mine was posted just under a week ago. I have no tracking number either. I know $4 postage isn't going to be the best...but I want it before Xmas or at least some warning!

xDanElliott · « **Reply #55 on:** December 15, 2008, 10:41:00 AM »

Ordered mine saturday, shipped today. Awaiting the package now.
I seriously hope this is worth the money haha.
Too lazy to make my own.

lawdog247 · « **Reply #56 on:** December 15, 2008, 10:55:00 AM »

QUOTE(xDanElliott @ Dec 15 2008, 01:17 PM)

Ordered mine saturday, shipped today. Awaiting the package now.
I seriously hope this is worth the money haha.
Too lazy to make my own.

Good luck, I ordered mine last saturday and it shipped last monday...still haven't seen it.

neu318 · « **Reply #57 on:** December 15, 2008, 10:55:00 AM »

QUOTE(WTFudge @ Dec 15 2008, 07:47 AM)

Has anyone in the UK recieved theirs yet? Mine was posted just under a week ago. I have no tracking number either. I know $4 postage isn't going to be the best...but I want it before Xmas or at least some warning!

I'm not in the UK but I bought mine last monday, shipped last Tuesday and still haven't received it. Hope I get it soon so I can atleast dump the key before the firmware is available.

ashegam · « **Reply #58 on:** December 15, 2008, 12:53:00 PM »

Sicne the kit doesn't come with the green dvd rom power cable, where can i buy one?

Or is there one in xbox 360 when I open it and remove the liteon drive?

calloused labia · « **Reply #59 on:** December 15, 2008, 03:41:00 PM »

QUOTE(pipniga @ Dec 13 2008, 04:18 PM)

So, it needs to be bridged, or not?

Are you fucking kidding me?

This post has been edited by calloused labia: Dec 15 2008, 11:44 PM

Author Topic: Solderless Liteon Dvd Key Extractor From Diygadget.com (Read 1278 times)