Print

[cloudboy]

so i was trying to hook up a circuit that would read my liteon key. i am confident that i did it right. xtractor reader said it was a400 on port 0. i had the tray half open and was trying to read it. everything worked but the key, it was filled with cc's in dvdkey. however, inquiry.bin and identify.bin both showed the correct dvd model, etc. i bridged tx and r707, and now the pc still sees the drive the same as before, but the tray wont open. the light flashes green constantly. i hooked the 360 up to my tv and it doesnt give me an error message, but when i hit the open button it just says "opening" but of course it never opens. please help

edit-- i dont know if this matters but i powered the xbox up and tested from gnd to 5v (the solder points) and it still has a 5v charge. so anything i have screwed up would have been on tx or r707

This post has been edited by cloudboy: Yesterday, 06:05 AM

[cloudboy]

bump



btw i might have shorted r707 because im a complete idiot. in fact im sure thats what i did. i cant find any desolder.