xboxscene.org forums

Author Topic: Xtractor V 2.6 Reader - Error (bc=0)  (Read 80 times)

unique72

  • Archived User
  • Newbie
  • *
  • Posts: 6
Xtractor V 2.6 Reader - Error (bc=0)
« on: November 02, 2008, 06:25:00 AM »
heres a piccy  Xbox date is 23 08 2008
drive works with originals
drive won't read using doskey32 (USB)

will try Doskey16 when a mate drops off a DB9 lead

IPB Image
IPB Image

Just used my setup to do a different (july 2008) drive and that was OK first time no problems ...

Just this drive  blink.gif

thanks for your time

u72
Logged

unique72

  • Archived User
  • Newbie
  • *
  • Posts: 6
Xtractor V 2.6 Reader - Error (bc=0)
« Reply #1 on: November 02, 2008, 07:20:00 AM »
IPB Image
IPB Image
Logged

oxide32

  • Archived User
  • Newbie
  • *
  • Posts: 17
Xtractor V 2.6 Reader - Error (bc=0)
« Reply #2 on: November 02, 2008, 07:46:00 AM »
could you post a picture of the board with the tx bridged!! thanks.
Logged

unique72

  • Archived User
  • Newbie
  • *
  • Posts: 6
Xtractor V 2.6 Reader - Error (bc=0)
« Reply #3 on: November 02, 2008, 08:11:00 AM »
QUOTE(oxide32 @ Nov 2 2008, 03:22 PM) View Post

could you post a picture of the board with the tx bridged!! thanks.


Sure, its not the prettiest solder job ever - but its been Soldered/de-soldered/Fluxed/Cleaned/Tested/Swore at etc.. a few times now to test the drive with Originals (which work fine).

If I knew this was coming i'd have installed a switch!  wink.gif

IPB Image
IPB Image

i've done continuity tests from the PCB through holes to the Connector and all is well

Thanks

u72
Logged

OggyUK

  • Archived User
  • Hero Member
  • *
  • Posts: 939
Xtractor V 2.6 Reader - Error (bc=0)
« Reply #4 on: November 02, 2008, 08:25:00 AM »
Could you try DVDKey32 0.6

Also, check PM wink.gif
Logged

unique72

  • Archived User
  • Newbie
  • *
  • Posts: 6
Xtractor V 2.6 Reader - Error (bc=0)
« Reply #5 on: November 02, 2008, 09:45:00 AM »
QUOTE(BenieUK @ Nov 2 2008, 04:07 PM) View Post

Let us know if this works..


will do in 10 mins smile.gif
Logged

unique72

  • Archived User
  • Newbie
  • *
  • Posts: 6
Xtractor V 2.6 Reader - Error (bc=0)
« Reply #6 on: November 02, 2008, 10:03:00 AM »
Stranger and Stranger!  unsure.gif


IPB Image
IPB Image


Repeated this 4 times, same result ...


u72
Logged

podger

  • Archived User
  • Hero Member
  • *
  • Posts: 501
Xtractor V 2.6 Reader - Error (bc=0)
« Reply #7 on: November 02, 2008, 10:55:00 AM »
With that error and all CC's it would appear no data was retrieved from your serial port..... You will need to have another look at your setup check you connections etc.....
 Also, try another drive, to confirm your PC and serial are all OK....
Logged

unique72

  • Archived User
  • Newbie
  • *
  • Posts: 6
Xtractor V 2.6 Reader - Error (bc=0)
« Reply #8 on: November 02, 2008, 01:24:00 PM »
Right apparently this *could* be a drive with the exploit blocked!   ohmy.gif

these are the details!

60 GB Version Premium white

LOT NO 834
TEAM FDOU
Date of Manufacture   2008 -08 -23

it has a paper Sticker *not* the normal Silver MS sticker for warranty seal

Bought From GAME Bury Manchester UK on 1 Nov 2008


After all my messing with the solder points/unplugging etc the drive still boots originals ok
so I have not damaged it in anyway ...

Hope that helps

u72
Logged

podger

  • Archived User
  • Hero Member
  • *
  • Posts: 501
Xtractor V 2.6 Reader - Error (bc=0)
« Reply #9 on: November 02, 2008, 01:48:00 PM »
Not with that date, me thinks.... 23 0f aug was the day Geremia released the exploit.....
Logged

oxide32

  • Archived User
  • Newbie
  • *
  • Posts: 17
Xtractor V 2.6 Reader - Error (bc=0)
« Reply #10 on: November 02, 2008, 02:48:00 PM »
just a thought but have you tried a piece of wire soldered to the alternate solder location, you might have a small break from manufacture in the pcb track, i had one that suffered this problem, thats why i use a piece of thin wire to bypass the whole track. so take it straight from the pin hole in the board straight across to the alternate solder point further up the board, bet it works :-))
Logged

wizard4444

  • Archived User
  • Newbie
  • *
  • Posts: 5
Xtractor V 2.6 Reader - Error (bc=0)
« Reply #11 on: November 04, 2008, 06:29:00 PM »
How do you weld the Rs323 cable into the PCB. Can someone post a picture?
Logged

jayjames

  • Archived User
  • Newbie
  • *
  • Posts: 22
Xtractor V 2.6 Reader - Error (bc=0)
« Reply #12 on: December 02, 2008, 04:57:00 PM »
did you ever work  it out?? unique??? i have a similar problem!
Logged

AsssKisser666

  • Archived User
  • Newbie
  • *
  • Posts: 17
Xtractor V 2.6 Reader - Error (bc=0)
« Reply #13 on: February 19, 2009, 09:09:00 PM »
QUOTE(jayjames @ Dec 3 2008, 02:33 AM) View Post

did you ever work  it out?? unique??? i have a similar problem!

Same here, has anyone found out a way around this issue?? I can dump with either dvdkey32, jungleflasher or xtractor reader... Xtractor reader gives me the bc=0 error, and jungleflasher says something like "Bad serial data". So I changed the serial port cable to another one, same shite happened... I can not get it to work so please someone help me!? I have promised my self not to buy anymore 360´s as this is my fourth, so I really need/want to get this working if it is at all possible?? Any help is dearly appreciated! Thx.

Drive is from 2008 June... Its from a 360 arcade falcon.
Logged

daddy69

  • Archived User
  • Jr. Member
  • *
  • Posts: 65
Xtractor V 2.6 Reader - Error (bc=0)
« Reply #14 on: April 27, 2009, 03:58:00 PM »
I had a similar problem, you guys might want to check your COM port, I had it on the wrong port and as soon as I put it on the right one it dumped the firmware.
Logged