Print

[gtasaif]

i have been discovering new things with the 360 elite i just bought it was manufactures in august is that a good things plus i am going to learn how to hack it since all this make no sense

[Modify_inc]

Does this require a straight or cross over serial cable?

[Ree1981]

Oi, that tutorial needs to be re-written. Not to say I'm not thankful, I AM, but it's.. messy. ^^;

I hope it works though, and that we get som success reports soon, 'cause I've ordered all the necessary components and I'm gonna give it a try soon.

Hope it works with Samsungs spoofed as Lite-ons too.

[MicroShack]

QUOTE(Ree1981 @ Aug 30 2008, 07:13 AM)

Oi, that tutorial needs to be re-written. Not to say I'm not thankful, I AM, but it's.. messy. ^^;

I hope it works though, and that we get som success reports soon, 'cause I've ordered all the necessary components and I'm gonna give it a try soon. (IMG:style_emoticons/default/smile.gif)

Hope it works with Samsungs spoofed as Lite-ons too.

I have to agree its abit messy but its good...

I have done 5 liteons so far and all ok..

If I get time today I will re-write it and add my findings and tips to it which will help others..

[Ree1981]

QUOTE(MicroShack @ Aug 30 2008, 12:45 PM)

I have to agree its abit messy but its good...

I have done 5 liteons so far and all ok..

If I get time today I will re-write it and add my findings and tips to it which will help others..

That sounds sweet. I'll be watching this thread then. (IMG:style_emoticons/default/smile.gif)

[Revolt_Gameshop]

it looks like FW Toolbox 4.8 is out, read it in just a minute a go

[Ree1981]

Yup, here's the release info. Source is: http://360patches.com/forums/index.php


Maximus - FIRMWARE TOOLBOX V4.8
---------------------------------------------------------------------
Last minute change, thanks to DeViLs360 for pointing possible issue with spoofing drives to liteon Cheesy

WHATS NEW ON V4.8:

� �- ADDED: � � Custom Spoofing Option on "Tools->Spoof Firmware" option (it asks for your 96 bytes inquiry.bin), this could be safer for spoofing drives to Liteon because appears Liteon drives have per-drive specific inquiry response.

If you lost you inquiry.bin file and cannot redump it, then go ahead with listed Liteon spoofing option (it will work
but you will not have the factory value).

� �- ADDED: � � You can now open key.bin file from main window instead of manually type the key (will ask for a 16 bytes file).

� �- FIXED: � � Clicking on firmware file didnt open properly on toolbox.

[Ree1981]

Ok, does anyone actually know how the connectivity kit thing works?? The 'guide' just says some random stuff about connecting some extra cables, but not where. o_O

[Bo0m3r]

Does anybody knows if this trick works in 2 ways? read/write?
If you can write too than we only need to wait for c4e to release a custom fw?

Anyway, nice job to all!
I really thought this one would take a while or even be non-modable, especially when looking at that patent description.

[Antman1]

QUOTE(Bo0m3r @ Aug 31 2008, 07:17 AM)

Does anybody knows if this trick works in 2 ways? read/write?
If you can write too than we only need to wait for c4e to release a custom fw?

Anyway, nice job to all!
I really thought this one would take a while or even be non-modable, especially when looking at that patent description.

This will allow you to read only the key and spoof info.  This does not dump the whole firmware yet.  From what I have seen it is a read only flash but that may change not sure.  but if they cant get a whole dump of the firmware it would be difficult to write new firmware for it.

[Iriez]

In regards to fwtoolbox, do NOT spoof a liteon onto a samsung! There are extra inquiries that need to be dealt with that will need a special samsung firmware released for!

All other drive vendor's should be fine.

QUOTE(Ree1981 @ Aug 30 2008, 02:21 PM)

Yup, here's the release info. Source is: http://360patches.com/forums/index.php
Maximus - FIRMWARE TOOLBOX V4.8
---------------------------------------------------------------------
Last minute change, thanks to DeViLs360 for pointing possible issue with spoofing drives to liteon Cheesy

WHATS NEW ON V4.8:

� �- ADDED: � � Custom Spoofing Option on "Tools->Spoof Firmware" option (it asks for your 96 bytes inquiry.bin), this could be safer for spoofing drives to Liteon because appears Liteon drives have per-drive specific inquiry response.

If you lost you inquiry.bin file and cannot redump it, then go ahead with listed Liteon spoofing option (it will work
but you will not have the factory value).

� �- ADDED: � � You can now open key.bin file from main window instead of manually type the key (will ask for a 16 bytes file).

� �- FIXED: � � Clicking on firmware file didnt open properly on toolbox.

[Ree1981]

QUOTE(Iriez @ Sep 1 2008, 07:56 PM)

In regards to fwtoolbox, do NOT spoof a liteon onto a samsung! There are extra inquiries that need to be dealt with that will need a special samsung firmware released for!

All other drive vendor's should be fine.

What? I've heard of people spoofing Lite-ons onto Samsungs just fine. Where are you getting this information?

[podger]

Ree1981:
This comes straight from c4eva. The same goes for Hitachi BTW.... Benq drives with iXtreme are fine... He will release new firmware....

In general cross spoofing is not considered 100% safe...... it's a possible detection mechanism.....

This post has been edited by podger: Sep 2 2008, 03:08 AM

[podger]

***Update***

just uploaded a new version to xbins...

this version no longer needs the ctrl port used in the previous version

thanks the Seventhson and Uberfry for helping make this happen....

Usage

DVDKey32 xxxx y

xxxx is you port number, used in iPrep etc

y is you  com port

This does work with USB 2 Serial adapters...

This post has been edited by podger: Sep 12 2008, 10:39 AM

[qaz_76]

I only get bluescreen with this.