xboxscene.org forums

Pages: 1 ... 21 22 [23] 24

Author Topic: Liteon Update! Key Readable By Soldering Serial Port.  (Read 2464 times)

4matc

  • Archived User
  • Newbie
  • *
  • Posts: 8
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #330 on: December 03, 2008, 03:20:00 AM »
QUOTE(yaywoop @ Dec 2 2008, 02:31 PM) *

well first try reading the key again, but with com port 15.

Hooray i've dunped my key from my lite on. (IMG:style_emoticons/default/biggrin.gif)  (IMG:style_emoticons/default/smile.gif)
The problem is in the tutorial from team executer (I'll let them know).
It says:
7. Before you dump the key you must eject the Liteon tray by pressing eject on the CK3. Then manually push the tray half way in - do not press eject or close the tray all the way in. Now open a command prompt (click Start > Run > type "CMD" (without the quotes) and press enter. Now type cd c:\DVDKey32_04_portio32 and this will put you into the DVDKey32 directory. Type dvdkey32 <io port> <com port> (The example uses IO port 9000 and COM Port 3 so we type dvdkey32 9000 3. (see Image 9).

It has to be:
Before you dump the key you must eject the Liteon tray by pressing eject on the CK3.
Turn on your CK3 pro/lite. You do have to press eject untill the tray will be closed. Turn the CK3 off when the tray is halfway. Then turn CK3 on en your lite on is readable. Your tray must stay half opened.
Now open a command prompt (click Start > Run > type "CMD" (without the quotes) and press enter. Now type cd c:\DVDKey32_04_portio32 and this will put you into the DVDKey32 directory. Type dvdkey32 <io port> <com port> (The example uses IO port 9000 and COM Port 3 so we type dvdkey32 9000 3. (see Image 9). Repeat this procedure if your key dump fails.

Thanx 4 your help.
4matc  (IMG:style_emoticons/default/wink.gif)

This post has been edited by 4matc: Dec 3 2008, 11:21 AM
Logged

defrag86

  • Archived User
  • Newbie
  • *
  • Posts: 3
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #331 on: December 03, 2008, 07:25:00 AM »
I maked a rs232 converter following the schematics on this forum but i can't find max3232 in the store, only max232. Can I use it ?? Thanks
Logged

neocon

  • Archived User
  • Newbie
  • *
  • Posts: 6
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #332 on: December 03, 2008, 07:08:00 AM »
QUOTE(defrag86 @ Dec 3 2008, 11:55 PM) View Post
I maked a rs232 converter following the schematics on this forum but i can't find max3232 in the store, only max232. Can I use it ?? Thanks
Yes, just supply it 5v and not 3.3v, see  http://forums.xbox-s...o...59565&st=60
Logged

defrag86

  • Archived User
  • Newbie
  • *
  • Posts: 3
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #333 on: December 03, 2008, 08:21:00 AM »
QUOTE(neocon @ Dec 3 2008, 03:44 PM) View Post

Yes, just supply it 5v and not 3.3v, see  http://forums.xbox-s...o...59565&st=60

Ah ok! But in the tread you linked me they say of solder the 3.3v wire (I think the wire with the supply voltage) to the V5 pad of the image not to solder it with a 5v wire...  uhh.gif  uhh.gif
Logged

yaywoop

  • Archived User
  • Sr. Member
  • *
  • Posts: 306
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #334 on: December 03, 2008, 08:24:00 AM »
QUOTE(defrag86 @ Dec 4 2008, 02:57 AM) View Post

Ah ok! But in the tread you linked me they say of solder the 3.3v wire (I think the wire with the supply voltage) to the V5 pad of the image not to solder it with a 5v wire...  uhh.gif  uhh.gif

the 5V pad is just to the right of the 3V pad. see this image if your not sure  http://i197.photobuc...oop/360/sch.png
Logged

defrag86

  • Archived User
  • Newbie
  • *
  • Posts: 3
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #335 on: December 03, 2008, 09:17:00 AM »
QUOTE(yaywoop @ Dec 3 2008, 05:00 PM) *

the 5V pad is just to the right of the 3V pad. see this image if your not sure  http://i197.photobucket.com/albums/aa189/yaywoop/360/sch.png


Thanks! I think of supply the converter from the psu of my computer because I'm not a good solderer
Logged

Substance90

  • Archived User
  • Newbie
  • *
  • Posts: 17
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #336 on: December 04, 2008, 10:00:00 AM »
QUOTE(4matc @ Dec 3 2008, 12:20 PM) View Post

Hooray i've dunped my key from my lite on. biggrin.gif  smile.gif

Hey, I tried this a LOT of times, because I knew the xecutor tutorial was wrong, but still didn`t get the key. :-\
Logged

sowa99

  • Archived User
  • Full Member
  • *
  • Posts: 101
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #337 on: December 08, 2008, 12:19:00 PM »
hi.

I tried to read my dvd key today and few days in back and.. i have not idea what is wrong. I know my com port/adapter is ok because I tried echo test and it works. When it is connected to lite on it send me 00 when I turn it on and off so my soldering is ok. I have VT6421 PCI card and I've flashed many drives without any problems. But if I try read the liteon it still give me CC in key (inqury etc is ok!).. Of course tray is in half open position when I try to read it. I know this is popular problem but everyone said check soldering etc.. I'm good in hardware and I know my soldering is ok.. I tried to reverse TX with RX and no succes.I aslo have Maximus Reader and dvdkey under dos and still no key. So where could be my problem?  uhh.gif

If anyone is able to help, please hit me back.

Regards, Sowa
Logged

xbox360sexual

  • Archived User
  • Sr. Member
  • *
  • Posts: 351
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #338 on: December 08, 2008, 12:58:00 PM »
You DO need to switch tx / rx, as in, tx from LiteON to receive (rx) on  RS232... How else would you expect it to work?
Logged

HUNTERXIII

  • Archived User
  • Newbie
  • *
  • Posts: 3
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #339 on: December 09, 2008, 12:18:00 AM »
Thanks podger for all the messages... Finally retrieved the key...  biggrin.gif

I have learned a valuable lesson... In scene, dont expect people to spoon feed...

Learning happens by way of experimenting...

Thanks to all for the posts in this thread...  love.gif

Aru.
Logged

Substance90

  • Archived User
  • Newbie
  • *
  • Posts: 17
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #340 on: December 11, 2008, 02:09:00 PM »
QUOTE(HUNTERXIII @ Dec 9 2008, 09:54 AM) View Post

Thanks podger for all the messages... Finally retrieved the key...  biggrin.gif

I have learned a valuable lesson... In scene, dont expect people to spoon feed...

Learning happens by way of experimenting...

Thanks to all for the posts in this thread...  love.gif

Aru.

So how did you do it?
Logged

foaley77

  • Archived User
  • Full Member
  • *
  • Posts: 240
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #341 on: December 14, 2008, 04:50:00 PM »
Can someone help me I have done a few of these drives before not for a while though when I go and put dvdkey 8800 is brings up "Problems with SATA Comunication, Wrong Port????"

I have checked the port with iprep and it shows 8800 all the other liteons  I have done where using this port so I don't know why its not working.

I have checked my solder points and they are correct
Logged

OggyUK

  • Archived User
  • Hero Member
  • *
  • Posts: 939
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #342 on: December 14, 2008, 05:25:00 PM »
QUOTE(HUNTERXIII @ Dec 9 2008, 07:54 AM) View Post

Thanks podger for all the messages... Finally retrieved the key...  biggrin.gif

I have learned a valuable lesson... In scene, dont expect people to spoon feed...

Learning happens by way of experimenting...

Thanks to all for the posts in this thread...  love.gif

Aru.


Legend.

We dont mind helping but you then we learn more by trying, probing and discussing!


Logged

sam2000

  • Archived User
  • Newbie
  • *
  • Posts: 11
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #343 on: December 15, 2008, 07:36:00 AM »
Hello every one , is via vt8237 on-board sata chipset suitable for key liteon retrieve  pop.gif  pop.gif  pop.gif
Logged

shadowbroker

  • Archived User
  • Newbie
  • *
  • Posts: 8
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #344 on: December 15, 2008, 07:43:00 AM »
Why not wait till the 25th Dec?  iXtreme 1.5 is out and a method for flashing LiteOn drives, no soldering, no drive swapping. Like any Samsung or BenQ drive. look on IRC for more info if needed.

I was doin liteon drives but now turning people away, coz if they wait a week they can save £35 as no need for a new drive.
Logged
Pages: 1 ... 21 22 [23] 24
« previous next »