xboxscene.org forums

Pages: 1 ... 6 7 [8] 9 10 ... 24

Author Topic: Liteon Update! Key Readable By Soldering Serial Port.  (Read 2539 times)

KondorX

  • Archived User
  • Newbie
  • *
  • Posts: 10
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #105 on: September 04, 2008, 08:48:00 AM »
QUOTE(ash1471 @ Sep 4 2008, 08:42 AM) *

This is the best tutorial you will find bar none. It explains everything in detail.
http://beta.ivancover.com/wiki/index.php/Xbox_360_Lite-On_DG16D2S_Extract_Key#Serial_Adapter

ASH


yes kwno i can see the pictures, really a good value thankks


QUOTE(ash1471 @ Sep 4 2008, 08:42 AM) *

This is the best tutorial you will find bar none. It explains everything in detail.
http://beta.ivancover.com/wiki/index.php/Xbox_360_Lite-On_DG16D2S_Extract_Key#Serial_Adapter

ASH


yes now i can see the pictures, really a good value thankks
Logged

qaz_76

  • Archived User
  • Newbie
  • *
  • Posts: 7
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #106 on: September 04, 2008, 11:01:00 AM »
Can somebody confirm this TxD point? I lost the reconnect point but seems that it goes to this point too?

IPB Image
Logged

qaz_76

  • Archived User
  • Newbie
  • *
  • Posts: 7
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #107 on: September 04, 2008, 03:12:00 PM »
QUOTE(qaz_76 @ Sep 4 2008, 06:01 PM) *

Can somebody confirm this TxD point? I lost the reconnect point but seems that it goes to this point too?


Could not find edit so i quote myself.

Can someone confirm these orange points?

IPB Image
Logged

ILikeMeat

  • Archived User
  • Jr. Member
  • *
  • Posts: 52
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #108 on: September 04, 2008, 09:47:00 PM »
O my goodness. No. the first 2, are already connected, the other one, if you connected it, you probably fried the controller chip, the regulator or whatever it is, or both.
Logged

Great2bfree

  • Archived User
  • Jr. Member
  • *
  • Posts: 90
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #109 on: September 05, 2008, 01:18:00 AM »
Great. spend 3 hours, and still no key. Tried both the DVdkey32 and the Dvdkey.  Dvdkey keeps outputting "0000000000000000" as my key and to try again.

All soldering are solid, tested with DM-Meter. I used Ipred  to determine my Via 6421 chipset DeviceIO. It says it is "84008c00". So to use dvdkey32 I would type in "dvdkey32 8400 8c00 1"  ? anyone?

and for dvdkey under DOS, can we use a floppy? worry about free space on it for the dump.


Can anyone who has been successful post whether they pop the DVD tray half open using the (paperclip method)./ chipset / Serial chipset ST3232/ rs32 ect ect.
Logged

thestanleycup

  • Archived User
  • Newbie
  • *
  • Posts: 27
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #110 on: September 05, 2008, 03:07:00 AM »
goddammit i keep on getting messge drive found wait 20 sec and then error sending cdb
i ordered the adapter on ebay i soldered directly to drive  i don.t have Connectivity kit

Logged

offtopic

  • Archived User
  • Newbie
  • *
  • Posts: 21
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #111 on: September 05, 2008, 03:39:00 AM »
I have the question  ??? or com1 has to be integrated with the mainboard or he can be from the external controller PCI COM >> http://www.sunix.com.tw/cc/en/detail.php?class_a=&prod_id=287 (becose i not have COM on my motherboard)
Logged

Ree1981

  • Archived User
  • Jr. Member
  • *
  • Posts: 99
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #112 on: September 05, 2008, 07:17:00 AM »
Myeah, I was up for hours last night trying to get it to work too. I think I got the inquiry.bin and identify.bin, but never the key. Weird.

Anyway, anyone know if this adapter works? It's what I have. http://www.pololu.com/catalog/product/0127

I connected 3v > VCC. That's right, right?
Logged

Great2bfree

  • Archived User
  • Jr. Member
  • *
  • Posts: 90
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #113 on: September 05, 2008, 08:06:00 AM »
QUOTE(thestanleycup @ Sep 5 2008, 10:07 AM) *

goddammit i keep on getting messge drive found wait 20 sec and then error sending cdb
i ordered the adapter on ebay i soldered directly to drive  i don.t have Connectivity kit


That because you selected the wrong port. Refer to the http://beta.ivancover.com/wiki/index.php/X...#Serial_Adapter above to determine your port.


BTW I'm using the xbox360 to power up the DVD drive. Is it normal to have the tray close once it has been place in the half open stage? In each try, the DVD drive will closed it self on power on.
Logged

thestanleycup

  • Archived User
  • Newbie
  • *
  • Posts: 27
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #114 on: September 05, 2008, 01:27:00 PM »
QUOTE(Great2bfree @ Sep 5 2008, 10:06 AM) *

That because you selected the wrong port. Refer to the http://beta.ivancover.com/wiki/index.php/X...#Serial_Adapter above to determine your port.
BTW I'm using the xbox360 to power up the DVD drive. Is it normal to have the tray close once it has been place in the half open stage? In each try, the DVD drive will closed it self on power on.


Okay thanks for the info , i finally got to get the key!!! smile.gif thanks for your tip but believe it or not , i got a bad news to go with it, i unsoldered the adapter from the lite on then plugged back the liteon in 360, i put original game of 360 in drive , i close the drawer, drive starts to read and immediatly stops reading and gives the Open Tray message grr.gif shit!!! what now!!! did i fried the liteon ?????
Logged

giovani78

  • Archived User
  • Newbie
  • *
  • Posts: 2
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #115 on: September 05, 2008, 03:19:00 PM »
QUOTE(thestanleycup @ Sep 5 2008, 09:27 PM) *

Okay thanks for the info , i finally got to get the key!!! smile.gif thanks for your tip but believe it or not , i got a bad news to go with it, i unsoldered the adapter from the lite on then plugged back the liteon in 360, i put original game of 360 in drive , i close the drawer, drive starts to read and immediatly stops reading and gives the Open Tray message grr.gif shit!!! what now!!! did i fried the liteon ?????


Why would you want to extrakt the key and then put the lite-on drive back? Just curious smile.gif
Logged

Toddler

  • Archived User
  • Hero Member
  • *
  • Posts: 743
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #116 on: September 05, 2008, 05:19:00 PM »
QUOTE(giovani78 @ Sep 5 2008, 04:19 PM) *

Why would you want to extrakt the key and then put the lite-on drive back? Just curious smile.gif

To play games while he waits for a Samsung drive ordered from eBay?
Logged

Great2bfree

  • Archived User
  • Jr. Member
  • *
  • Posts: 90
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #117 on: September 05, 2008, 06:37:00 PM »
QUOTE(thestanleycup @ Sep 5 2008, 08:27 PM) *

Okay thanks for the info , i finally got to get the key!!! smile.gif thanks for your tip but believe it or not , i got a bad news to go with it, i unsoldered the adapter from the lite on then plugged back the liteon in 360, i put original game of 360 in drive , i close the drawer, drive starts to read and immediatly stops reading and gives the Open Tray message grr.gif shit!!! what now!!! did i fried the liteon ?????

Did you use a floppy? Use the xbox 360 to turn it on?
Logged

podger

  • Archived User
  • Hero Member
  • *
  • Posts: 501
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #118 on: September 05, 2008, 07:43:00 PM »
Great2bfree:  try this

dvdkey32 8400 840A 1
Logged

Great2bfree

  • Archived User
  • Jr. Member
  • *
  • Posts: 90
Liteon Update! Key Readable By Soldering Serial Port.
« Reply #119 on: September 05, 2008, 08:53:00 PM »
QUOTE(podger @ Sep 6 2008, 02:43 AM) *

Great2bfree:  try this

dvdkey32 8400 840A 1


Thanks. but no luck, computer crashes. Win Xp 32bit
Logged
Pages: 1 ... 6 7 [8] 9 10 ... 24
« previous next »