xboxscene.org forums

Author Topic: Problem With Iprep  (Read 34 times)

eaks

  • Archived User
  • Full Member
  • *
  • Posts: 118
Problem With Iprep
« on: July 21, 2008, 02:04:00 PM »
hey guys.. Im trying to reflash my X360 drive (my current firmware has bugs) and im having issues!

I have never fashed one b4.. i have read the guides but nothing that coments about my issue!

Im using a PCMCIA sata card via VT6421
Windows XP pro SP2
iprep v006 (after 007.02 didn't work) and iprep v007.02

So i install my pcmcia card and install the drivers and everything then i open up iprep.. I get an error on startup saying"Unhandled exception has occurred in your application..."
(IMG:http://i20.photobucket.com/albums/b237/eaks/ipreperror.jpg)

Hopefully that image works.. i have hit continue but after doing that i cannot select any target destination (its just blank).. But if i do change from the VT6421 to something else (which all are uncompatible) and then restart iprep i get no errors at all.. then when i pick the VT6421 chipset to use the same error pops up.. does anyone have any ideas?
Logged

swampy1111

  • Archived User
  • Full Member
  • *
  • Posts: 109
Problem With Iprep
« Reply #1 on: July 21, 2008, 10:01:00 PM »
i'm using the same as you
xp sp2 etc and i'm getting the same error when i open the firmware with iprep 006 but i can use the new 007. but i don't want that
Logged

eaks

  • Archived User
  • Full Member
  • *
  • Posts: 118
Problem With Iprep
« Reply #2 on: July 27, 2008, 05:59:00 PM »
im still having this issue with both iprep 006 and 007..

any ideas?
Logged

calloused labia

  • Archived User
  • Full Member
  • *
  • Posts: 116
Problem With Iprep
« Reply #3 on: July 27, 2008, 07:30:00 PM »
http://forums.xbox-scene.com/index.php?sea...e=4&order=0

Some people have claimed to flash the Benq using this PCMCIA card.

http://cgi.ebay.ca/SATA-Serial-ATA-2-Ports...1QQcmdZViewItem

Forget about I-prep and do everything manually using a boot disk,  dosflash and firmtool (to put your drive key into the modified firmware).

This post has been edited by calloused labia: Jul 28 2008, 02:42 AM
Logged

JT415Gz

  • Archived User
  • Newbie
  • *
  • Posts: 26
Problem With Iprep
« Reply #4 on: July 28, 2008, 12:11:00 AM »
I've always had problems using any version of iPrep through DOS
I finally was able to flash my benQ through DOSFLASH32 in Vista Ultimate using my onboard nforce sata chipset and xecuter connectivity kit...was so easy with dosflash32...just 1,2,3 man.
Use Dosflash32, forget iprep.
Logged

calloused labia

  • Archived User
  • Full Member
  • *
  • Posts: 116
Problem With Iprep
« Reply #5 on: July 28, 2008, 09:46:00 AM »
QUOTE(JT415Gz @ Jul 28 2008, 02:47 AM) *
I've always had problems using any version of iPrep through DOS
I finally was able to flash my benQ through DOSFLASH32 in Vista Ultimate using my onboard nforce sata chipset and xecuter connectivity kit...was so easy with dosflash32...just 1,2,3 man.
Use Dosflash32, forget iprep.


Is there an echo in here?
Logged

scuba156

  • Archived User
  • Hero Member
  • *
  • Posts: 1217
Problem With Iprep
« Reply #6 on: July 28, 2008, 11:45:00 AM »
you need to download and install Microsoft's .Net 2.0 (1.0 and 3.0 are different, it must be 2.0). you can get it by using the microsoft update feature from the start button, just select custom install when it asks. you can also get it directly from the microsoft website.
Logged