Topic: Spoofing Ms28 As Benq (Read 22 times)

caster420 · « **on:** July 06, 2008, 02:44:00 PM »

QUOTE(martin.ca @ Jul 6 2008, 05:17 PM)

Is this the correct way?

1) Put the orig.bin extracted from my Benq drive in the same directory with MS28 iXtreme firmware
2) Run the 'Make iXtreme firmware.cmd'
3) Put the newly created "ix14.bin" on iPrep-ed USB disk under the backup->serial folder as Sam-CFW.bin
4) Boot with USB disk
5) use fSam to flash

Yes, thats correct.

Caster.

Auspowers67 · « **Reply #1 on:** July 07, 2008, 12:41:00 PM »

QUOTE(caster420 @ Jul 6 2008, 10:20 PM)

Yes, thats correct.

Caster.

Hey Guys i have a question im trying to flash my M28 drive for my 360, and when i go threw the command and pick my sata card it just sits there no % load or nothing any help
thx

QUOTE(caster420 @ Jul 6 2008, 10:20 PM)

Yes, thats correct.

Caster.

oh yea and i get a error saying that drive is not ready yet the os is winxp

martin.ca · « **Reply #2 on:** July 07, 2008, 12:45:00 PM »

Try reading Textbook's tutorial on flashing an MS28 in lieu of step 4 and 5.

caster420 · « **Reply #3 on:** July 07, 2008, 01:18:00 PM »

Read the tutorial as martin stated. You dont flash samsung drives in windows.......

ert13 · « **Reply #4 on:** July 14, 2008, 05:02:00 PM »

I am also interested in replacing my benq with a samsung. I recently (about a week ago) flashed my benq with fw 1.41 using textbook's tutorial as a guide.

I still have all the data on the flashdrive i used to flash my benq, but i dont see a orig.bin file in the flash. Where/ how do i get this orig.bin file

ps. this was my first fw flash

thx in advance

OggyUK · « **Reply #5 on:** July 15, 2008, 02:22:00 AM »

It will be called BenQ-OFW.bin and be located in /backups/serial7/serial5/ (the 1234567 12345

)

Rename it Orig.bin

Helios150 · « **Reply #6 on:** August 03, 2008, 01:08:00 PM »

I have all the firmware ready on the usb stick. Now I'm using a nforce4 chipset to flash it... which works perfect with the benq's but have never done the samsung. Upon searching around the internet it may not work for the MS28. So is it ok to put in the samsung drive and just try and read the firmware first with either dben or dsam command?

Also, does it matter that the MS28 drive I have already has older ixtreme on it (from a dead xbox)?

Thanks

martin.ca · « **Reply #7 on:** August 03, 2008, 03:50:00 PM »

QUOTE(Helios150 @ Aug 3 2008, 02:44 PM)

I have all the firmware ready on the usb stick. Now I'm using a nforce4 chipset to flash it... which works perfect with the benq's but have never done the samsung. Upon searching around the internet it may not work for the MS28. So is it ok to put in the samsung drive and just try and read the firmware first with either dben or dsam command?

Also, does it matter that the MS28 drive I have already has older ixtreme on it (from a dead xbox)?

Thanks

You don't need to dump Samsung's firmware, since you're spoofing it as a Benq.

Just flash your spoofed firmware to it.

Helios150 · « **Reply #8 on:** August 03, 2008, 04:48:00 PM »

QUOTE(martin.ca @ Aug 3 2008, 05:26 PM)

You don't need to dump Samsung's firmware, since you're spoofing it as a Benq.

Just flash your spoofed firmware to it.

But will I be able to properly flash it with an nforce4 chipset (Asus A8N-E MB)? Or do I need to track down a via sata card...if so, know a good online store that ships to Canada?

Author Topic: Spoofing Ms28 As Benq (Read 22 times)