Print

[rosswaa]

well i went to flash my ms28 and it read the f/w fine thn when i went to flash it it said
failed 00% and that was it, now the drive does nothing at all
the green ligh in the midle of the ring that shows the power, flashes fast
so im guessing the drive is nakered
should i just buy a new drive and flash that with the firmwar from this drive?

[podger]

It's almost impossible to brick you Sammy, unlees you plug it in wrong... You should first try Mtkflash again without doing all the 10 sec trick stuff, as it no in a bad flash state.... just say yes to the resend question... After that you should give dosflash a whirl, it can be more successful in these case... Just remove your other CD/DVD and hard drives and typre dosflash at the dos prompt and it should at least see the drive in auto mode

[rosswaa]

it doesnt detect the drive at all now though

[OggyUK]

Dosflash should!

We managed to resurrect this box yours should be similar.

We used dosflash on this drive.

[coco12345]

dude dont buy new drive no need at all
your drive now has no firmware thats why it blink..
anyways you said you have ms28..what method you used? switch?
if switch do the following step:
1- power on your pc.
2- ofcourse you should have a floppy and all ( personally recommand mtkflash ), boot from the floopy.
3- write mtkflash w /m mod.bin, then click enter.
4- once hitting enter, few option will come..you should know which one is yours(DONT CHOOSE YOURS YET).
5- power you 360 ( pc will not detect your drive since bad flash ), after powering on your 360..put your swtich off.
6- choose your option from step 4 and click enter, and count one or two seconds then hit your swtich to on.
- drive should write without any problem. if didnt do step 5 & 6 again.

cheers

This post has been edited by coco12345: May 31 2008, 07:25 PM

[rosswaa]

i did the thing with a via sata, turn the xbox off for 10 seconds and back on, it read the firmware fine so iv got the backup on my computer
but i cant reflash the drive

[monteca820ce]

i had the same problem

used iprep to fix


booted up like normal with a spare sata dvd cdrw drive...doesnt matter what one
when i cut power for the 10 sec trick i plugged in the m28 instead of the dvd cdrw and it flashed
if it doesnt work the first time try a couple times cause timing was the key


if you cant get it i'll flash it for you. i live in ct

[rosswaa]

ill try that way of doing it, hopefully it works

if not whats dosflash?

[podger]

Dosflash is primarily what we use for Benq drives..... It comes with iPrep also.... It's very powerful and seems to be more successful at discoverying drive in some case... It also will works with any other drive that use the mediatek chipset like your kreon or sammys etc.... It's important to remove the other CD/DVD if you use auto mode as you could very easily corrupt those by accident...

[rosswaa]

are there any guides for doflash about? i dont have a clue

[rosswaa]

dont worry iv fixed it thanks to all of you!
especially "monteca820ce"- if i was gay ud be my perfect partner lmao  (IMG:style_emoticons/default/love.gif)

thanks alot!

[monteca820ce]

no problem! thank you for giving me a hell of a laugh!

[cibanik]

QUOTE(rosswaa @ Jun 2 2008, 12:57 AM)

dont worry iv fixed it thanks to all of you!
especially "monteca820ce"- if i was gay ud be my perfect partner lmao  (IMG:style_emoticons/default/love.gif)

thanks alot!

Hi guys. How did you actually solve this case? I am having the exact same problem. Im stuck with a MS28 green blinking light and MTKFLASH and DOSFLASH dont detect my drive.

Thanks in advance

[monteca820ce]

did you even bother to read this thread. My step by step of what i did is here

[rosswaa]

QUOTE(cibanik @ Jun 4 2008, 04:31 PM)

Hi guys. How did you actually solve this case? I am having the exact same problem. Im stuck with a MS28 green blinking light and MTKFLASH and DOSFLASH dont detect my drive.

Thanks in advance

go back through and monteca820ce explains how to fix this
if u need any more info let me know and ill write u a tutorial haha