Topic: Spoofing 360 Dvd Drive (Read 53 times)

solderingsultan · « **on:** May 17, 2008, 11:55:00 PM »

You need to obtain the original BenQ firmware drive key and flash it to the Samsung drive.

Does your computer's motherboard have a SATA port? That is number 1 on the priority list.

scuba156 · « **Reply #1 on:** May 18, 2008, 12:47:00 AM »

it doesnt matter, you shouldnt have your HDD plugged in while flashing unless you use NTFS4DOS.

i suggest you read textbooks tutorial. google it.

scuba156 · « **Reply #2 on:** May 18, 2008, 01:43:00 AM »

like i said, read textbooks tutorial. you will then realise that you do not have to solder anything

scuba156 · « **Reply #3 on:** May 18, 2008, 02:08:00 AM »

yes, it is a PDF tutorial. it is called 'textbooks tutorial' which is why i put it in quotes. just google what ive put in quotes and it will be the first link that pops up

dustger89 · « **Reply #4 on:** May 20, 2008, 09:50:00 PM »

So finally after painful steps of getting all requirements for the flash, I have finally gotten the key off my original drive. How am I supposed to spoof to the new DVD Drive?

scuba156 · « **Reply #5 on:** May 20, 2008, 09:56:00 PM »

open up your BENQ firmware in 360fwtoolbox and copy the key, then open up the samsung firmware and paste the key and inject it. then you can spoof it to the correct drive using one of the contect menus in 360fwtoolbox (sorry, i cannot remember which menu its actually in)

dustger89 · « **Reply #6 on:** May 20, 2008, 11:17:00 PM »

I cant get the PC to recognize the DVD Drive for some reason. The SATA card is installed, pluged in to the DVD Drive, the drive is connected to the the other port from the xbox, and the SATA cord is connected from the drive to the SATA card. The power is on and it doesnt want to read it there. If anything, its reading it as a CD Drive.

Author Topic: Spoofing 360 Dvd Drive (Read 53 times)