xboxscene.org forums

Pages: [1] 2

Author Topic: After Flashing Benq , E65 And Drive Will Not Eject  (Read 79 times)

techmob

  • Archived User
  • Newbie
  • *
  • Posts: 48
After Flashing Benq , E65 And Drive Will Not Eject
« on: May 08, 2008, 04:32:00 AM »
QUOTE(Kotana @ May 8 2008, 12:03 PM) View Post

BenQ flashing     everything was god, no erros or something like this...
Please help me...
Wat can i dooooooo...
I have the backup form the orig.bin
Sorry for my bad englisch


check that the drive key is ok in the orig.bin with 360FW-Toolbox-46 and also check the custom firmware to see if the key is ok in that

key might be the problem  sleep.gif
Logged

Kotana

  • Archived User
  • Newbie
  • *
  • Posts: 7
After Flashing Benq , E65 And Drive Will Not Eject
« Reply #1 on: May 08, 2008, 04:53:00 AM »
ok thanks

how can i see the key, in the Toolbox
i have 2 files in the Backup Folder

BENQ-OFW.BIN
BENQ-CFW.BIN

ok i loaded the BENQ-OFW.BIN (origin)
and the key ist is ok
i can see it.

what now....


The custom firmware ist the BENQ-CFW.BIN?????
It is also ok..Key ok
Logged

Kotana

  • Archived User
  • Newbie
  • *
  • Posts: 7
After Flashing Benq , E65 And Drive Will Not Eject
« Reply #2 on: May 08, 2008, 05:04:00 AM »
What can i do now?????
Logged

speedspeed

  • Archived User
  • Newbie
  • *
  • Posts: 39
After Flashing Benq , E65 And Drive Will Not Eject
« Reply #3 on: May 08, 2008, 06:53:00 AM »
E65: DVD Drive Error.... DVD Timeout, Wrong firmware, dvd is without f/w chip, etc. This can also be caused by the tray not being fully closed on boot.
Logged

podger

  • Archived User
  • Hero Member
  • *
  • Posts: 501
After Flashing Benq , E65 And Drive Will Not Eject
« Reply #4 on: May 08, 2008, 07:04:00 AM »
Make a back up of the orig.bin and then reflash the drive...... The firmware is most likely corrupt.... Reboot ff the usb/floppy and re-run fben, this should erase the flash and reflash bens-cfw.bin.... Watch the screen for any errors, wait til the job is finished....
Logged

podger

  • Archived User
  • Hero Member
  • *
  • Posts: 501
After Flashing Benq , E65 And Drive Will Not Eject
« Reply #5 on: May 08, 2008, 07:15:00 AM »
If you want to restore the original just boot the USB/floppy you used the first time, as long as you haven't formatted it of re-run iPrep, and run rben.bat... this is a 3rd file for flashing back the benq-ofw.bin....

pretty easy..
Logged

podger

  • Archived User
  • Hero Member
  • *
  • Posts: 501
After Flashing Benq , E65 And Drive Will Not Eject
« Reply #6 on: May 08, 2008, 07:48:00 AM »
You probably have a bad flash..... The whole power off/on thing is designed to induce this mode, but seeing as you are already there it gets a little more difficult to get it right....

Try leaving the drive on while you run rben....
Logged

Kotana

  • Archived User
  • Newbie
  • *
  • Posts: 7
After Flashing Benq , E65 And Drive Will Not Eject
« Reply #7 on: May 08, 2008, 12:23:00 PM »
i reflashed the drive

writing finished!! DataSum: B1F0!!!!!

and the Drive still E65!!!!

What the F.......!!!!!
Logged

jimjom

  • Archived User
  • Hero Member
  • *
  • Posts: 904
After Flashing Benq , E65 And Drive Will Not Eject
« Reply #8 on: May 08, 2008, 12:31:00 PM »
ARE YOU ERASING BEFORE WRITING AGAIN?
Logged

techmob

  • Archived User
  • Newbie
  • *
  • Posts: 48
After Flashing Benq , E65 And Drive Will Not Eject
« Reply #9 on: May 08, 2008, 01:00:00 PM »
QUOTE(Kotana @ May 8 2008, 08:26 PM) View Post

yes
erasing with fBen?!!!


have you plugged the sata cable back in on the xbox..?

have you another drive you can test?
Logged

podger

  • Archived User
  • Hero Member
  • *
  • Posts: 501
After Flashing Benq , E65 And Drive Will Not Eject
« Reply #10 on: May 08, 2008, 02:34:00 PM »
All those errors are coz the flash isn't erased properly......


When you did rben did the E65 go away?????
Logged

techmob

  • Archived User
  • Newbie
  • *
  • Posts: 48
After Flashing Benq , E65 And Drive Will Not Eject
« Reply #11 on: May 09, 2008, 01:58:00 AM »
QUOTE(Kotana @ May 9 2008, 08:47 AM) View Post

No, the same E65 after rBen!!!!
I think the the same, the E65 is there because isn't erased...
How ca i erase the broken bin perfectly!?!?!?!Can you give me a short tutorial?
is Dosflash better for read and flash?
Is my DRIVE maybe brocken!?!?!?!
hope not!!!!!!!


i had the same problem http://forums.xbox-s...howtopic=649437

it was because the traces were not connected properly!

has your drive been dumped via switch in the past?
Logged

Kotana

  • Archived User
  • Newbie
  • *
  • Posts: 7
After Flashing Benq , E65 And Drive Will Not Eject
« Reply #12 on: May 09, 2008, 02:41:00 AM »
no it has not been dumped...is the first time....
It is a new drive.
I think i have to flash with dosflas, to erase the broken FW.

How can i make a boot USB stick with dosflash?I now it whit iPrep....
Or how  to go ahead to do the flash?
Logged

techmob

  • Archived User
  • Newbie
  • *
  • Posts: 48
After Flashing Benq , E65 And Drive Will Not Eject
« Reply #13 on: May 09, 2008, 03:04:00 AM »
QUOTE(Kotana @ May 9 2008, 10:17 AM) View Post

no it has not been dumped...is the first time....
It is a new drive.
I think i have to flash with dosflas, to erase the broken FW.

How can i make a boot USB stick with dosflash?I now it whit iPrep....
Or how  to go ahead to do the flash?



post 3 and 5 on the link i posted explained how

just download dosflash 1.3 and put it in the root of your sd card
Logged

Kotana

  • Archived User
  • Newbie
  • *
  • Posts: 7
After Flashing Benq , E65 And Drive Will Not Eject
« Reply #14 on: May 09, 2008, 07:51:00 AM »
i have make the steps.....dosflash e .... 1 a0 1 4 d8 o
press Y and return, and power on the xbox...
from status 0x7F to status 0x80!!!!!!!!!!
i can get come in to erase the FW!!!!
how did you proceed?
Logged
Pages: [1] 2
« previous next »