Topic: Benq Status: 0x7f? (Read 43 times)

techmob · « **on:** May 02, 2008, 03:51:00 PM »

QUOTE(pirno @ May 2 2008, 11:23 PM)

Hello, I have followed the Textbook tutorial. I plug my SATA data cable into my VIA card, iPrep sees it and all. I boot from USB but when it says the status "0x7F", I turn on my xbox and it doesn't change from 0x7F to 0xD1, any ideas?

make sure you have the sata cable plugged into the internal port of the sata card , the one nearest to the front of the pc

pirno · « **Reply #1 on:** May 02, 2008, 04:00:00 PM »

I tried both, the back and the one inside but it still didn't work.

podger · « **Reply #2 on:** May 02, 2008, 04:21:00 PM »

0x7F just means nothing there, as the drive is off at this stage, this is the correct status....

if this is 2 port card it's possible port 0 ain't there, which is the one iPrep configures....look at this post

http://forums.xbox-s...&...t&p=4177730

pirno · « **Reply #3 on:** May 02, 2008, 04:47:00 PM »

cheers it works now

time to flash

Author Topic: Benq Status: 0x7f? (Read 43 times)