xboxscene.org forums

Author Topic: Where Is The Key Code Stored On A Drive?  (Read 77 times)

-markie-

  • Archived User
  • Newbie
  • *
  • Posts: 18
Where Is The Key Code Stored On A Drive?
« on: March 25, 2008, 12:55:00 PM »
Hey,

Could some1 tell me where abouts on the drive the keycode is stored.

Basicly my hitachi 78 drive stopped spinning up discs. My friend had a old xbox and gave me his drive (hitachi 78 also) so i had the amazing idea of swapping drives  so all i did was take the circuit board out of my mates drive and put it into mine (the board in the hitachi drive where u would solder to hard flash a drive)

i put it in my xbox and plays dvd movies but not xbox games.

So guessing the key code isnt stored on that board so where is it stored?

thanks
mark
Logged

swampy1111

  • Archived User
  • Full Member
  • *
  • Posts: 109
Where Is The Key Code Stored On A Drive?
« Reply #1 on: March 25, 2008, 01:03:00 PM »
its stored in the tsop on the board you can't put someone elses board into your drive because then its got the wrong key in it
try putting your board into he's drive and put that into your 360
Logged

-markie-

  • Archived User
  • Newbie
  • *
  • Posts: 18
Where Is The Key Code Stored On A Drive?
« Reply #2 on: March 25, 2008, 01:06:00 PM »
i did that i put my board into his drive (his works) and put his drive in my xbox. so surely the only difference is the mechanics i.e laser.

is there a guide to remove the laser. i will remove laser and put his laser in my old drive with my board in

Logged

Ranger72

  • Archived User
  • Hero Member
  • *
  • Posts: 3746
Where Is The Key Code Stored On A Drive?
« Reply #3 on: March 25, 2008, 01:11:00 PM »
QUOTE(-markie- @ Mar 25 2008, 08:06 PM) *

i did that i put my board into his drive (his works) and put his drive in my xbox. so surely the only difference is the mechanics i.e laser.

is there a guide to remove the laser. i will remove laser and put his laser in my old drive with my board in



That should work just fine. When you swapped the boards your drive key and firmware is not in his drive that you are using in your 360. There should be no problem playing games.

Unless there is something wrong with your circuit board.
Logged

OggyUK

  • Archived User
  • Hero Member
  • *
  • Posts: 939
Where Is The Key Code Stored On A Drive?
« Reply #4 on: March 25, 2008, 01:13:00 PM »
78's using rolling code, never in one specific place!
Logged

-markie-

  • Archived User
  • Newbie
  • *
  • Posts: 18
Where Is The Key Code Stored On A Drive?
« Reply #5 on: March 25, 2008, 01:20:00 PM »
but the keycode will always be on that circuit  board?
Logged

OggyUK

  • Archived User
  • Hero Member
  • *
  • Posts: 939
Where Is The Key Code Stored On A Drive?
« Reply #6 on: March 25, 2008, 01:31:00 PM »
Yup, its located ona  flash chip on the underside of the circuit board.
Logged

swampy1111

  • Archived User
  • Full Member
  • *
  • Posts: 109
Where Is The Key Code Stored On A Drive?
« Reply #7 on: March 25, 2008, 01:32:00 PM »
keycode is on your board in the tsop
if the drive from your m8 worked then swopping your board into it should work also
if he's drive worked that would pretty much rule out the laser
Logged

scuba156

  • Archived User
  • Hero Member
  • *
  • Posts: 1217
Where Is The Key Code Stored On A Drive?
« Reply #8 on: March 25, 2008, 05:18:00 PM »
your original post stated that you put HIS board into YOUR drive then into YOUR 360. that would mean the board has HIS key stored on it. you need to put YOUR board in HIS drive into YOUR 360 for it to work. dont get the boards mixed up either
Logged