Topic: C4EVA XTREME Benq V1.1 Multispeed (Read 625 times)

emm1t · « **Reply #105 on:** November 18, 2007, 01:52:00 PM »

flashed my first benq today

- dosflash16 - via 6421- 5x
no probs

thanks C4EVA and Schtrom

Semicidal · « **Reply #106 on:** November 19, 2007, 12:04:00 AM »

Okay, I figured out the problem with Iprep (I needed to update a definition file) but I ran into something else.
When I click to format my disk, I get an exception error saying the device isnt ready, but when I click try again, it works no worries. Should I trust it>

Martinchris23 · « **Reply #107 on:** November 19, 2007, 03:55:00 AM »

QUOTE(Semicidal @ Nov 19 2007, 07:04 AM)

Okay, I figured out the problem with Iprep (I needed to update a definition file) but I ran into something else.
When I click to format my disk, I get an exception error saying the device isnt ready, but when I click try again, it works no worries. Should I trust it>

After formatting the disk, open it in Explorer - if it has your files on it, then try booting from it.

If it works, you should be ok!

GRABRAC · « **Reply #108 on:** November 19, 2007, 07:47:00 AM »

Is there anyway to backup the original firmware with this method in case if i have to put back the original firmware to play xbox live or something like that ?

Martinchris23 · « **Reply #109 on:** November 19, 2007, 08:00:00 AM »

QUOTE(GRABRAC @ Nov 19 2007, 02:47 PM)

Is there anyway to backup the original firmware with this method in case if i have to put back the original firmware to play xbox live or something like that ?

What method? The first thing you need to do is to read the firmware which is currently on your drive.

KEEP IT SAFE!!!!

If you ever want to restore the firmware, just flash this file back again.

Semicidal · « **Reply #110 on:** November 19, 2007, 11:11:00 AM »

When you read the firmware following the PDF's instructions, it puts the file "orig.bin" on the USB drive. THAT is your original FW, make multiples of it.

~~As to my attempt's, there are files on it but it does not boot. I dont think there are DOS files on it though. Was I to add those myself?~~
my god, I really need to take this slowly, and re-reread all those instructions again, how could I miss something so stupid,, Thanks for the patience everyone.

GRABRAC · « **Reply #111 on:** November 19, 2007, 12:59:00 PM »

Allright thanks, much appreciated.

slobearsi · « **Reply #112 on:** November 20, 2007, 12:11:00 AM »

thanks for the writeup. just flashed my 360 and it went perfect. only thing i ran into problems with was intalling the drivers on my pci sata card.

xyexz · « **Reply #113 on:** November 20, 2007, 01:08:00 AM »

QUOTE(Semicidal @ Nov 19 2007, 02:04 AM)

Okay, I figured out the problem with Iprep (I needed to update a definition file) but I ran into something else.
When I click to format my disk, I get an exception error saying the device isnt ready, but when I click try again, it works no worries. Should I trust it>

Semicidal, if you know you have a good fw that you acquired from the "usual places", you can update your definition file yourself. All you need is the hacked firmware file and a program like "Win MD5 Sum", you can download it http://www.md5summer.org/.
Install and start Win MD5 Sum and get the sum of the firmware file you're wanting to use.
Find the file in the iPrep programs root folder called 'ixDef.xml', open and after this line:

CODE

Add the following:

CODE

    type name of firmware

Save it and restart iPrep, and the firmware you loaded into Win MD5 Sum can now be loaded into iPrep without error!
This whole process is quick once you've done it a few times and is quicker than going and searching for an updated Def file, those on dial-up will appreciate this method

WARNING: Only do this for firmware files you know are in correct working order for the drive you're wanting to flash.

Semicidal · « **Reply #114 on:** November 20, 2007, 01:29:00 AM »

Okay, so now it's not booting into DOS...but am I supposed to boot from the POST screen, or open it somehow whilst in windows? My mainboard is set to look for boot files on removable media first, but it never finds anything.

romadark · « **Reply #115 on:** November 25, 2007, 02:44:00 AM »

Hey guys, i'm kinda new in here but i've heard a lot about this site and i just saw that i just found what i'm looking for.

I need some help though.

Can anybody tell me how to download the firmware for my BenQ drive and the Tutorials too. I tried but never found a link or anything. Maybe i havent got used to this site

. Any tips and suggestions are always welcome too.
I just want to find a way to Mod my 360 and stop paying a hell of a lot for each game.
Please help. I'm desesperated

.

Thanks in advance.

foaley77 · « **Reply #116 on:** November 25, 2007, 04:47:00 AM »

Does anyone have problems booting up Assassins Creed it takes like a minute to load the game?

using 8 x Firmware and Verbatim dvd's, game works fine on my hitachi Drive

d940217 · « **Reply #117 on:** November 25, 2007, 02:46:00 PM »

so i modded to 5x and now i get...
"to play this disc, put it in an xbox 360 console"
i get this message on backups and originals...

codeman896 · « **Reply #118 on:** November 25, 2007, 06:34:00 PM »

QUOTE(foaley77 @ Nov 25 2007, 06:47 AM)

Does anyone have problems booting up Assassins Creed it takes like a minute to load the game?

using 8 x Firmware and Verbatim dvd's, game works fine on my hitachi Drive

Yeah I have the same issue, tried to boot up backup of Assassin's and the console left dashboard and just went to a black screen sounding like it was searching for data on disc. I let it go for about 45 seconds and nothing happened so i just pressed eject and 360 went back to dash. Any ideas on why this is occurring with this FW? Backup works excellent on hitachi drive.

bigghek · « **Reply #119 on:** November 25, 2007, 06:52:00 PM »

Flashed my first BenQ today.

No problems at all.

Thank you!

Author Topic: C4EVA XTREME Benq V1.1 Multispeed (Read 625 times)