Print

[shawndezy115]

wow noooooobbbbbbinsh.
anybody who has already extracted their firmware should be able to flash their drive. seing that reading the firmware is the "hard part" lololololololololol.
I love noobs.

[dvp95]

So are you supposed to use Dosflash 16 or 32 from 1.2 or 1.3?  Dosflash32 doesnt do anything for me even with the VIA driver disabled.  If I use Dosflash16 in 1.3, it asks about resending the MTK and when I press yes and turn the 360 off and on, it still switches between the 51 and the other number and never changes like it says in other tutorials.  When I use dosflash16 in 1.2, it doesnt ask about the MTK but it asks if I want to read, write or erase the firmware.  Then after putting in dosflash r xxxx 1 a0 1 4 orig.bin 1 it is able to create the orig.bin file in the dosflash folder but after that step it asks if I want to overwrite or not.  If I press yes then it gives some error.  What am I supposed to do?

[carl149]

it shouldn't be a problem when u able 2 boot in dos mode with dosflash16 ver1.3... just follow the instruction n u'll hv ur drive flashed with  iextreme in no time.... just finished modding my halo 3 360... i think its the easiest among other drive....

[Hoodedsoldier]

When i use ntfsdos it seems to just sit there after it allocates the amount of memory. I can't remember exactly what is there. I do the step process where you have to hit y for everything and then it it says blah blah something about the internet and then just hangs. Anyone know whats up?

[Corrosive Substance]

Using a USB pen drive was alot easier for me and took me about 5 minutes to figure out.

[didineedthis]

QUOTE(Corrosive Substance @ Oct 29 2007, 07:22 PM)

Using a USB pen drive was alot easier for me and took me about 5 minutes to figure out.

same here... i found it a lot easier with a usb pen drive .

[Hoodedsoldier]

QUOTE(Corrosive Substance @ Oct 29 2007, 07:22 PM)

Using a USB pen drive was alot easier for me and took me about 5 minutes to figure out.

 

check ya pm corrosive

[Corrosive Substance]

QUOTE(Hoodedsoldier @ Oct 29 2007, 07:29 PM)

check ya pm corrosive

YGPM

[MANHUNT]

QUOTE(Corrosive Substance @ Oct 29 2007, 11:03 AM)

My steps.

1.C:

2.cd DOSFLASH

3.Power ON Xbox 360

4.dosflash.exe

5. It shows 3 ports none are the Xbox 360's. I enter No t resend the command until the drive responds. I do this twice for my drive to be on the list.

6. I select my drive #8 - The Details: Flash Manufacturar ID: 0x00, DeviceID:0x00 - Flash Type :MTK Vendor Intro Failed! - Flash Size: 0 bytes (0 KB).

7. Unknown flash chip!

That is what I always get.

If you are experiencing errors it is because you are suppose to re-send MTK and then shut off your 360 then turn it back on.

Also once again I will be updating this its just hard cause I already modded my BenQ.

[alphanumeric303]

I have tried this with a usb and disk boot disk.  When I put in dosflash r XXXX 1 a0 1 4 orig.bin 0, it asks about the MTK question.  Then after I press Y, it says Status 0xFF and never changes when I power the xbox on or off.

[soundifound]

what prog are you guys using to format your USB sticks?

[budhapalm]

can some1 help, when i hit type in dosflash, i get the MTK error message ... I powered it off than on again a few time ...yet the status remains the same ...flash at 0x80/0x81.

Please help out a newb .

thanks!

[ps360lover]

okay i got as far as step
10. Now Once In NTFS4DOS Type the drive letter where you saved the DOSFLASH folder along with a colon then hit Enter (ex. C:)

i type in
"C:" and it says error(i think it deff don't work do)

what could be wrong here.im running XP

also am i sppose to have my original fw allready dumped on my computer or does dos do it for me??

thanks for yer help.i've been trying for 2 DAYS(17 or 18 hours) to mod this f'ing drive i have a sata if that helps

this is the sata

http://cgi.ebay.ie/ws/eBayISAPI.dll?ViewIt...em=130154549613

This post has been edited by ps360lover: Oct 30 2007, 01:55 AM

[daddy69]

Manhunt, I apologize if im being off topic but if you could answer my question to the holiday bundle that you just purchased does it come with a HDMI port?

[DoWork805]

thnx just what i was looking for