xboxscene.org forums

Author Topic: Mtkflash Ms28 - Stops Reading At 0%...12%...5%  (Read 17 times)

Booyakasha11

  • Archived User
  • Newbie
  • *
  • Posts: 3
Mtkflash Ms28 - Stops Reading At 0%...12%...5%
« on: October 11, 2007, 02:29:00 PM »

When I use IDUMP or MTKFLASH r /m orig.bin for an MS28 doing the 10 sec trick, using a SYBA SATA SY-VIA-150R VIA6421L chip set, it starts reading the firmware and just halts at different percentages like starts reading and stops at 12% or 0%..., only 1 time did it get past a 100% to go to its 2nd check and it stopped again, I am booting using a USB card and pretty much used Tutorials guide, so Xtreme boot maker, with Ixtreme 1.2C.  I have read pretty much everything in almost every forum and nobody seems to be having this insanely frustrating problem.  Then I got an Xecuter blaster 360 NE thinking that would help but no dice, Thanks for any help in advance.
Logged