Print

[IIIBourneIII]

Ok so.... This is xtremely  (IMG:style_emoticons/default/tongue.gif)  annoying me now.


I have an Nvidia 680i mobo with onboard via 8237 sata chipset (from what Hex Workshop tells me from my USB boot stick) and the Samsung 360 drive
Here is my Sata controllers info:

Name   NVIDIA nForce 590/570/550 Serial ATA Controller
Manufacturer   NVIDIA Corporation
Status   OK
PNP Device ID   PCI\VEN_10DE&DEV_037F&SUBSYS_C55E10DE&REV_A2\3&2411E6FE&0&70
I/O Port   0x000009F0-0x000009F7
I/O Port   0x00000BF0-0x00000BF3
I/O Port   0x00000970-0x00000977
I/O Port   0x00000B70-0x00000B73
I/O Port   0x0000D800-0x0000D80F
Memory Address   0xCFFFD000-0xCFFFDFFF
IRQ Channel   IRQ 22
Driver   c:\windows\system32\drivers\nvata.sys (5.10.2600.0691 built by: WinDDK, 102.88 KB (105,344 bytes), 3/31/2007 6:32 PM)
   
Name   NVIDIA nForce 590/570/550 Serial ATA Controller
Manufacturer   NVIDIA Corporation
Status   OK
PNP Device ID   PCI\VEN_10DE&DEV_037F&SUBSYS_C55E10DE&REV_A2\3&2411E6FE&0&71
I/O Port   0x000009E0-0x000009E7
I/O Port   0x00000BE0-0x00000BE3
I/O Port   0x00000960-0x00000967
I/O Port   0x00000B60-0x00000B63
I/O Port   0x0000C400-0x0000C40F
Memory Address   0xCFFFC000-0xCFFFCFFF
IRQ Channel   IRQ 23
Driver   c:\windows\system32\drivers\nvata.sys (5.10.2600.0691 built by: WinDDK, 102.88 KB (105,344 bytes), 3/31/2007 6:32 PM)
   
Name   NVIDIA nForce 590/570/550 Serial ATA Controller
Manufacturer   NVIDIA Corporation
Status   OK
PNP Device ID   PCI\VEN_10DE&DEV_037F&SUBSYS_C55E10DE&REV_A2\3&2411E6FE&0&72
I/O Port   0x0000C000-0x0000C007
I/O Port   0x0000BC00-0x0000BC03
I/O Port   0x0000B800-0x0000B807
I/O Port   0x0000B400-0x0000B403
I/O Port   0x0000B000-0x0000B00F
Memory Address   0xCFFFB000-0xCFFFBFFF
IRQ Channel   IRQ 20
Driver   c:\windows\system32\drivers\nvata.sys (5.10.2600.0691 built by: WinDDK, 102.88 KB (105,344 bytes), 3/31/2007 6:32 PM)

I have 3, However I have 6 sata slots....not sure how that works.  (IMG:style_emoticons/default/unsure.gif)

Whatever the case, when I boot up using the USB stick and it asks me to type in "iDump xxxxxxx xxxxx"

It gives me an error saying  "No Drive Detected"  and Samtool starts, then gives me "Error: File Backups\xxxxxxx\xxxxx\orig.bin does not exist Program Aborted", and goes back to C prompt  (IMG:style_emoticons/default/mad.gif)

I know my the drive is hooked up to my pc, I see it in my bios. I also tried to manually make MTKflash see my drive as well.  (IMG:style_emoticons/default/huh.gif)

I used to top Sata controller on IRQ 22 and came up with the 16 digits : DE10 7F03 F009 7009 or is it (F009 7009 DE10 7F03) and replaced the 16 digits in front the the "00" on the VIA8237 line in Hex Workshop

"DE10 7F03 F009 7009 0056 4941 3832 3337 0000 0095 1012 | ......p..VIA8237......"

That is what I thought I was supposed to do. My raid is disabled as well (default) however I'm confused in if my problem has to do with the fact that I have 6 sata connections/ 3 sata controllers and that I'm using the wrong controller for the connection that my drive is plugged in.... make any since? or does it not matter?  (IMG:style_emoticons/default/uhh.gif)

I'm trying to flash ixtreme 1.2 REV C


If anyone can be of assistance....it would be much appreciated


 Thanks (IMG:style_emoticons/default/blink.gif)

This post has been edited by IIIBourneIII: Oct 5 2007, 05:05 AM

[IIIBourneIII]

nobodyhas any help ?