Topic: iXtreme firmware 1.2 RevC for TS-H943 Xbox 360 (Read 789 times)

mrgreaper · « **Reply #105 on:** July 23, 2007, 10:43:00 AM »

QUOTE(sosotiit @ Jul 23 2007, 02:10 PM)

Media Stealth: What is needed and How To Verify, (DMI, PFI, Video Partition, Samsung SS)

XDVDMulleter will give you some info on a problem that many encountered with mulleter. You can use an oder version like 9.2, it seems the newer version conflict for some people.

-soso

cheers ... i actualy took the plunge and did it with the video cable unpluged so the cpu wouldnt be regonised

man theres so much info on the forum its unbelivable ! and it was a tutorail you posted the link to that helped me most http://forums.xbox-s...howtopic=601501 the how to update firmware on a ms28 using a usb device

(that tutorial really needs to be on the main tutorials section of the webpage !!! thanks again

and ofcourse thanks to the firmware creator ! with out him we would all have scratched discs

Iriez · « **Reply #106 on:** July 23, 2007, 04:48:00 PM »

QUOTE(mrgreaper @ Jul 23 2007, 07:07 AM)

is there any info in regards to this yet? kinda dont want to have to update unless its really needed (i think all mine are stealthed any way as i did them with a kron firmware dvd drive and a few with the hitachi drive in my old 360 ) is there a way of checking them to see if they are stealthed i tried mulmeter mentioned in the thread (beta 9 ) but it does not seem to like vista loads up select view iso slect dvdr and it starts then crashs so i assume thats a vista relation problem but for all i know that could mean the disc has no stealth lol

i know some one said earlyier it doesnt take long to flash but my red ring of death 360 is in manchaster at mo and thats how i power the drive as i heard its not good to do it with your 360 (i lent it to a mate to do his and it kind of lengthens the process lol)

Yes, i spoke to c4e, he said there is nothing to worry about. here is his explanation:

c4e: orig fw will see a +rw PFI with a blank dmi on a bad backup
c4e: rev c will see a dvd-rom pfi with a blank dmi on a bad backup
c4e: rev b will see a dvd-rom pfi +media tag with a stealth DMI if it was present for that game, but still not a game disc, dvd-rom/video
c4e: both cases are still safe from banning as they cant tell if it was burnt that way on a silver
c4e: on slow fw , it willstill dvd-rom but plus media tag and blank dmi

Iriez · « **Reply #107 on:** July 23, 2007, 07:49:00 PM »

QUOTE(DuBob4432 @ Jul 23 2007, 07:07 PM)

please don't flame me because i don't make many backups as i don't have many games, but how does one make a non-stealth backup? again, sorry for this ignorance but i don't get it, i am still having no issues w/ 5.2c and my backups of my originals come back as stealth w/ mulleter. am i missing something here?

In the name of science, you can make a non-stealth backup by choosing to forgo the option of patching the DMI, PFI and proper video to the image you are creating from your disc.

Xeinon · « **Reply #108 on:** July 24, 2007, 03:37:00 AM »

Is it possible that this firmware update would help me who is having trouble with DDE on my box?

fierygt · « **Reply #109 on:** July 24, 2007, 01:00:00 PM »

QUOTE

Is it possible that this firmware update would help me who is having trouble with DDE on my box?

Xeinon..."possibly" by using the slow read option, it could help improve your situation, but a firmware alteration like this wouldn't generally improve what is most likely a failing laser.

djrtek · « **Reply #110 on:** July 25, 2007, 01:35:00 PM »

OK this sucks!

I just flashed to 1.2c and now I've been getting the 3ROL.

At first I only followed textboks tutorial, the one I've been using when I first flashed the xbox.

Was I supposed to follow any other specific instructions to upgrade other than the usual methods for flashing the first time? i.e.) Did I need to flash back to orig.bin before upgrading from 1.2 to 1.2revc?

I then followed the tutorials in here: http://forums.xbox-s...howtopic=601501
by using mtkflash rather than "idump, iflash, etc."

I'm still getting the 3ROL. Do you guys think the 3ROL is caused by my updating to 1.2c or just my xbox overheating?

sosotiit · « **Reply #111 on:** July 25, 2007, 01:54:00 PM »

You did not need to go back to original, it is ok to flash 1.2c directly.

the firmware has nothing to do with it. It is pure coincidence or only thing could be that by opening the case you have moved/unscrew...touched something.

sorry, you can try the clamp replacement, good success rate. (hardware forum)

-soso

Iriez · « **Reply #112 on:** July 25, 2007, 08:50:00 PM »

QUOTE(djrtek @ Jul 25 2007, 03:11 PM)

OK this sucks!

I just flashed to 1.2c and now I've been getting the 3ROL.

At first I only followed textboks tutorial, the one I've been using when I first flashed the xbox.

Was I supposed to follow any other specific instructions to upgrade other than the usual methods for flashing the first time? i.e.) Did I need to flash back to orig.bin before upgrading from 1.2 to 1.2revc?

I then followed the tutorials in here: http://forums.xbox-s...howtopic=601501
by using mtkflash rather than "idump, iflash, etc."

I'm still getting the 3ROL. Do you guys think the 3ROL is caused by my updating to 1.2c or just my xbox overheating?

I have heard of this happening to users that did not completely restore to original before reflashing. Apparently by using fw toolbox to restore back to original, then using 1.2revC to flash, resolves the issue. Let me know if that helped you.

We are doing a complete revision from scratch up on the batch restoration and flashing process to create a more stable environment. The previous 'beta' version i posted here did improve the situation, but not completely.

NikkiRock · « **Reply #113 on:** July 26, 2007, 12:22:00 PM »

QUOTE(Iriez @ Jul 26 2007, 06:26 AM)

I have heard of this happening to users that did not completely restore to original before reflashing. Apparently by using fw toolbox to restore back to original, then using 1.2revC to flash, resolves the issue. Let me know if that helped you.

We are doing a complete revision from scratch up on the batch restoration and flashing process to create a more stable environment. The previous 'beta' version i posted here did improve the situation, but not completely.

i flashed my brand new xo with ixtreme 1.2 rev c (not flashed before) and had one red light in down right corner. got sammy ms25, i restored it with my original firmware and works fine but dunno why 1.2 rev c wont work. (IMG:style_emoticons/default/huh.gif)

djrtek · « **Reply #114 on:** July 26, 2007, 12:01:00 PM »

ok an update on my situation... I reflashed my drive but using th mtk flash method rather than idump/iflash and then did the towel trick and havnt gotten the 3rol...YET.

Am I safe or should I still revert back to original and then reflash to 1.2c? also, what is fw toolbox?

phistyle · « **Reply #115 on:** July 27, 2007, 01:50:00 PM »

ok I just got a new xbox 360 and used the mtkflash method to flash my ms25 and all seems to be working well so far....hope I dont get banned again...

magicfx2k7 · « **Reply #116 on:** July 28, 2007, 10:38:00 AM »

I can Toshiba-Samsung TS-H943 Ms25.
Which firmware I must use?
I flashed with firmware iXtreme_Samsung_v1.2 revC, but with this firmware I do not playing the games (backups) of xbox 1.

daveywavey1212 · « **Reply #117 on:** July 28, 2007, 04:17:00 PM »

Just a question on the new firmware.
iXtreme firmware 1.2 RevC
There is a fast and a slow version at the moment i can only use the fast because the slow seems to lock up the game when it is loading.
Is there a firmware version at normal speed.
The fast version makes an awfull noise from the dvd drive when it is loading and the older firmwares did not

sosotiit · « **Reply #118 on:** July 28, 2007, 05:43:00 PM »

what they call fast is the normal speed (12x),
-soso

MPA · « **Reply #119 on:** July 29, 2007, 10:19:00 AM »

flashed to 1.2C around a week ago - used the hexeditor method to inject my key as my 360 won't boot games otherwise.

All seemed well - backups appear to be working fine - 'til I put in the orig F.E.A.R disc yesterday and got the old 'please insert an xbox 360 disc' message.

Could also be the linked to my previous message about movie dvd's which previously worked on the 360 not loading anymore but I don't think there's any way i can figure this out myself.

Anyone else having similar issues with this iextreme.

360 - Sammy TS-H943 ms25 flashed to ix1.2revC quiet mode.

Author Topic: iXtreme firmware 1.2 RevC for TS-H943 Xbox 360 (Read 789 times)