Topic: C4EVA iXTRM HITACHI v1.2 Stealth rev2 (Read 449 times)

antz1970 · « **Reply #45 on:** July 09, 2007, 08:19:00 AM »

you dont need it for hitachi's m8 , just run the restore.bat file from the firmware package.

p.s are you the guy i have on my friends list?

myfranco · « **Reply #46 on:** July 09, 2007, 09:00:00 AM »

Thank you for your great effort.Hoping to hear v79 getting flashed soon too.

Paperstack.1 · « **Reply #47 on:** July 09, 2007, 09:47:00 AM »

Oh man.... it was one hell of an experience flashing my Hitachi 47DJ. everything went perfect the first time like it should.

only bad thing that happened was i lost all of my fingernails. that's how scared I was since this was my first time actually doing it myself

jamiem1987 · « **Reply #48 on:** July 09, 2007, 09:51:00 AM »

i have a brand new unflashed 47dj in my xbox at the moment, the boxes ive done before have been sammys, after reading all the horror stories on here about bricking drives before i start id like to get the key off my 47dj how do i do this on a hitachi? many thanks

bodybag · « **Reply #49 on:** July 09, 2007, 10:31:00 AM »

Hi

I used restore last night on my 360 and got a couple of errors while flashing, but got 100% at the end. Then I reflashed it with the lastest 1.2 rev 2 and got no errors when flashing.......

Do I have anything to worry about??? have been on it a few times today with no apparant problems....

OptiMyst · « **Reply #50 on:** July 09, 2007, 12:36:00 PM »

Restore and flash to 1.2rev2 went fine here. Great work!

By the way: The flasher of 1.2rev2 ist the same as in 1.2. So I don't think the chance of bricking is higher with rev2.

RuFf rYdA · « **Reply #51 on:** July 09, 2007, 12:43:00 PM »

i just flashed with rev 2 , my xbox needs 2 ejects to close is for some reason , backups work fine ,any ideas, was fine with rev1

GreatBiest · « **Reply #52 on:** July 09, 2007, 12:48:00 PM »

QUOTE(GreatBiest @ Jul 9 2007, 09:21 AM)

Hi
First i want to say hello to you guys, im new here
Ive important question ..

Yesterday i flashed succesfully my Hitachi 46D from Maximus-Garyopa Hitachi-LG Xtreme v2.3 Stealth 8in1
up to to new IXTRME 1.2 (rev1)

To get my Drive in Mode B , i simply had to start the 360 with open Disc Tray...nice

Will this Method worky anymore with the iXTRM 1.2, or was it only possible with flashed GaryOPA 2.3 8in1 ?
THX

Greets
Crowley

Please ,can somebody answer my Question ?

sosotiit · « **Reply #53 on:** July 09, 2007, 01:05:00 PM »

QUOTE(GreatBiest @ Jul 9 2007, 03:24 PM)

Please ,can somebody answer my Question ?

It should?!??
you know you can try it to!!! and let us know.
-soso

Harry1 · « **Reply #54 on:** July 09, 2007, 01:30:00 PM »

Yes I can confirm that method to get into mode B still works. I hate using slax

Iriez · « **Reply #55 on:** July 09, 2007, 01:30:00 PM »

QUOTE(Sankyou @ Jul 9 2007, 09:04 AM)

Everything is working well. I did notice one slightly odd thing: a backup of Burnout Revenge will work on this firmware even though it does not work on v1.2 of the samsung ixtreme. Tested several other incompatible games and they were all shot down (properly) by the new firmware.

The hitachi version handles the video data in a slightly different way. Some backups that may fail stealth check on mulleter may boot on the hitachi. We are however, not very worried about this. Verification on video data is never going to be a option for MS.

So, the word to the wise is to always use mulleter to check your stealth patches before burning

In regards to the restoration and flashing process, no, it does not have to go 100% all in one fell swoop. You can run it a 100 times, all that matters is that each section was successfully restored or flashed, be it 1-4 first try, and 5-11 second try.

Iriez · « **Reply #56 on:** July 09, 2007, 02:42:00 PM »

QUOTE(leeds @ Jul 9 2007, 03:08 PM)

hi i flashed mine with the 1 with the little bug.xbox is fine play everything.what i want to know do i have to flash this new 1 that has had the bug fixed or is mine fine now.and what is rev1 and rev2.the 1 i flashed says rtmv2 and today i download anouther 1 and it says rtmv3 is this the new 1 with no bug.if i did put the new 1 on how safe is it to restore it lots of people are having trouble arnt they.and if the rtmv3 is the new 1 should i use the restore out of that 1 or use the restore from the 1 i flashed it from thanks for any help.

RTMv3 was a internal version listing, guess i forgot to change the folder before releasing. Yes, RTMv3 = rev2

Lush · « **Reply #57 on:** July 09, 2007, 03:47:00 PM »

i use the power supply from my 360 without any problems and i can still connect to live just fine...

RDSport323 · « **Reply #58 on:** July 09, 2007, 03:57:00 PM »

heh, I guess you guys are more cautious about flashing...

when I restored my 59DJ drive, I got 2 of those I/O errors.. but in the end, it gave me the 100% successful..

so I just went ahead and flashed with the 1.2v2,... and I again received about 2 I/O errors during flashing... but it gave me the 100% successful.

So.. I figured, that was good enough.. put together my xbox and... so far so good. been on live and everything. we'll see what happens.

knightmare007 · « **Reply #59 on:** July 09, 2007, 04:22:00 PM »

at first i was pissed that this release was shot, but then i realized i was trying to run a non stealth disc, so anyone out there having read issues, make sure your running a stealth image!

now i gotta tear the thing apart again and flash it one more time....what a pain

Author Topic: C4EVA iXTRM HITACHI v1.2 Stealth rev2 (Read 449 times)