Print

[hugo187]

flashed from 1.0 to 1.2 and now i get "open tray" on all disks even originals ... i even tried reflashing back to 1.o and still get "open tray" should i try to flash its original back on ? can anyone tell me if you had the same problem?? (IMG:style_emoticons/default/huh.gif)

[the soul poet]

QUOTE(hugo187 @ Jun 14 2007, 07:18 AM)

flashed from 1.0 to 1.2 and now i get "open tray" on all disks even originals ... i even tried reflashing back to 1.o and still get "open tray" should i try to flash its original back on ? can anyone tell me if you had the same problem?? (IMG:style_emoticons/default/huh.gif)

Have you injected your key properly?

[mattrb]

he is so lazy he probably forgot his orig.bin

[hugo187]

I'm lazy alright but not stupid.... lol  anyways thanx for your constructive  posts   (IMG:style_emoticons/default/muhaha.gif)

[Biaz]

Did you remember to put the SATA cable back into the DVD-drive? I was so excited that I forgot that once (IMG:style_emoticons/default/wink.gif)

[hugo187]

i tried everything from re-flashing 1.0 back and also original.bin all i get is unreadeable disk now.... (IMG:style_emoticons/default/grr.gif) plus i get the white screen now saying to play put on xbox360 game even on originals damnnnnnnnnnnnnnnnnnnn

This post has been edited by hugo187: Jun 14 2007, 06:43 PM

[xnoelahg]

QUOTE(hugo187 @ Jun 14 2007, 06:34 PM)

i tried everything from re-flashing 1.0 back and also original.bin all i get is unreadeable disk now.... (IMG:style_emoticons/default/grr.gif) plus i get the white screen now saying to play put on xbox360 game even on originals damnnnnnnnnnnnnnnnnnnn

 Double check your sata connection.

[zerotekxp]

QUOTE(hugo187 @ Jun 14 2007, 08:18 AM)

flashed from 1.0 to 1.2 and now i get "open tray" on all disks even originals ... i even tried reflashing back to 1.o and still get "open tray" should i try to flash its original back on ? can anyone tell me if you had the same problem?? (IMG:style_emoticons/default/huh.gif)

The image is made wrong.  You need to remake it from the original with xbc.

[ydgmms]

QUOTE(zerotekxp @ Jun 14 2007, 03:01 PM)

The image is made wrong.  You need to remake it from the original with xbc.

He said it happens with originals as well...

[sosotiit]

if even your original fw gives you prob  with orig disc, I would start looking at
clean lens, then pot tweak, then replace laser.

-soso

[hugo187]

thhis is weird now cause i have 3  360 doing the same thing now could it be that i mixed them up? i have tought of this  but i have kept them sepparate  this who;le thing started when i used iprep ....now i have 3 prior to the ixtremem 1.2 working fine is when  i flash 1.2 thta i got this problem  (IMG:style_emoticons/default/mad.gif)  3 xboxes man this sux  (IMG:style_emoticons/default/uhh.gif)

[myfranco]

Take the dvdrom out of the box.Unscrew it,open the tray(you can also do it by unplugging power brick while tray opened) and turn it upside down.You will see two thin canals at the back of the dvd tray and put some olive oil and make sure it flows to the end.Better if you don't put too much just a little to flow to the end.After that pull&push dvdtray and check.I know it sounds weird but that's the solution we found after 1.2 didn't play originals.

And of course tell us the result.

[hugo187]

hey sosotiit one of your theories worked! (IMG:style_emoticons/default/laugh.gif)  it was  the laser dude i guess it has done i'ts purpose .iwas able and lucky at the same time to get a hold of a E65 unit and swap my board into new laser and badda bin it worked .. thanx for those hints. and yes itried everything even pot tweaking it .... (IMG:style_emoticons/default/tongue.gif)