xboxscene.org forums

Author Topic: Xeno Top Gear Installation Video  (Read 34 times)

Xbox-Scene

  • Archived User
  • Hero Member
  • *
  • Posts: 4299
Xeno Top Gear Installation Video
« on: March 21, 2007, 10:15:00 PM »

Xeno Top Gear Installation Video
Posted by XanTium | March 21 23:15 EST | News Category: Xbox360
 
From xenotopgear.com
Quote


We at XENO TOP GEAR have shipped out our first 3 thousand units to retailers.
Consumers out there should be able to buy from any one of our official resellers shortly :) with the "made in Taiwan"; "made in China" issue, we would like to clearify that Taiwan is a part of China and lot of "Taiwan Factories" make their products in China and ship out of Taiwan, the competition is simply playing with words to fool consumers so that they can continue to be greedy and rip off consumers.
Finally, we would like to reassure the level of quality of our product. We will let 3rd party reviewers have the final judgement.

Official Site: www.xenotopgear.com
Buy Now ($45): ModchipStore.com | Divineo.com | ModChip.com | Divineo.cn

Logged

greengiant

  • Archived User
  • Sr. Member
  • *
  • Posts: 266
Xeno Top Gear Installation Video
« Reply #1 on: March 21, 2007, 09:45:00 PM »

Probably, been going like that for days now. In the end it comes down to the quality of the circuitry, (and them capacitors not touching the vreg hehe) and the customers.

I do wonder how theyr handling the intereference caused by switching sata signals with a mechanical switch. Thats a tricky one even commercial sata vendors wrestle with. Something to be learned possibly.

This post has been edited by greengiant: Mar 22 2007, 04:47 AM
Logged

HansiHusten

  • Archived User
  • Full Member
  • *
  • Posts: 101
Xeno Top Gear Installation Video
« Reply #2 on: March 21, 2007, 09:53:00 PM »

Is it ok to take out these alu plates? I somehow get the feeling its not....
Or what do you think`?
Logged

appleguru

  • Archived User
  • Hero Member
  • *
  • Posts: 1200
Xeno Top Gear Installation Video
« Reply #3 on: March 21, 2007, 10:13:00 PM »

QUOTE(HansiHusten @ Mar 22 2007, 12:00 AM) *

Is it ok to take out these alu plates? I somehow get the feeling its not....
Or what do you think`?


They offer some protection from interference with other devices... It's not really a problem to run without them though, usually just makes it fall outside of FCC interference transmittance specs.
Logged

sosotiit

  • Archived User
  • Hero Member
  • *
  • Posts: 2150
Xeno Top Gear Installation Video
« Reply #4 on: March 22, 2007, 07:29:00 AM »

QUOTE
Plse read the rules ,
and the following pinned thread:No More Non Technical Posts, Lost your Post...Read This


As this seems to happen more, we decided to hard moderate with sanctions authors of useless repetitive post and/or off topic post.

Anything that does not respect the intented purpose of the thread ( and in the context of the technical forum) will be removed.  

Note: If you want to have a non technical discussion on that product, plse find/start the appropriate thread in Xbox360 General, that said all technical post, discussion on how to use the features,  what can and cannot be done with the product... are all welcomed (IMG:style_emoticons/default/wink.gif) .


rgds,soso

This post has been edited by sosotiit: Mar 23 2007, 12:14 AM
Logged

GeToChKn

  • Archived User
  • Full Member
  • *
  • Posts: 245
Xeno Top Gear Installation Video
« Reply #5 on: March 22, 2007, 09:29:00 AM »

It should be interesting to see how it works since Tx made a big deal about theirs being delayed so they could do their SATA data thingy and add all this extra circuitry they say was needed to make it work and it seems the Xeno doesn't have all the fancy extra chips so is it necessary, is it going to affect performance or did they just do something different that Tx didn't think of or something.  Need a head to head review of each, with trying on a hitachi with various version, including a 78 drive and see how it handles modeb, and the different samsungs and see how it handles ms28's, etc and the hd ability.  If they both the same thing with good performance, price will probably determine it.  Everyone needs to wait till they are tried by users and not all these videos and sites everyone keeps releasing.
Logged

bucko

  • Recovered User
  • Hero Member
  • *
  • Posts: 4255
Xeno Top Gear Installation Video
« Reply #6 on: March 22, 2007, 11:29:00 AM »

This is getting tireing, again I do not wish to buy clones. (IMG:style_emoticons/default/sleeping.gif)
Logged

LESTAT

  • Archived User
  • Hero Member
  • *
  • Posts: 794
Xeno Top Gear Installation Video
« Reply #7 on: March 22, 2007, 06:35:00 PM »

QUOTE(bucko @ Mar 22 2007, 12:36 PM) *
This is getting tireing, again I do not wish to buy clones. (IMG:style_emoticons/default/sleeping.gif)
 
thats funny cuz the Xeno is not a clone. if you have the balls to call it a clone then you are the type of fool who calls an alladin chip a DuoX chip, and EVERYYYYYY otherrrrr  modchip for the xbox1  a clone of the X2 and X3 chips.
i have two things to say.
1)ther eis no need for active curcuitry when all the system is doing is a passthru. all your doing is doing a passthru of data to your pc, your not powering anything so big in that tiny chipset in the Xeno PCB that its going to hurt anything. infact all your using is millivolts, and milli amps.Xecutors need to forse you to drag a molex out of your pc is assinine and bullcrap.
2)if you do buy this device. do NOT lay the sata and data cables along the edge of the GPU heatsink like they did in the video.... dont freakin do it.... they could melt over time as that gpu heatsink gets insanely hot.keep the cables as far to the edge of the board as possible.  

there is absolutely NOTHING wrong with the Xeno mod. i just dont see a need for this type of mod since a firmware flash is a once in a long while thing unless your into ripping alot of games. the hard drive feature is nice but again, its a once in a while thing and you could save money buy simply buying the hard drive kit from those other guys.  
and Xeno is correct. there is not a whole lot of difference between parts made in China or made in Taiwan,there is some difference yes, make no mistake about it, but Xecutor is raping us on their cost. and their extras that are totally retarded and not needed.
i would take either product as long as they worked.but since one works and its 40 bucks vs 75 bucks.. i think the winner is obvious, and it sure as hell isnt down to craftmanship. cuz i sure as hell dont see xecutor putting a har drive adapter on their unit.

This post has been edited by LESTAT: Mar 23 2007, 01:37 AM
Logged

sosotiit

  • Archived User
  • Hero Member
  • *
  • Posts: 2150
Xeno Top Gear Installation Video
« Reply #8 on: March 24, 2007, 07:55:00 AM »

QUOTE(2nd Warning @ sanctions)
QUOTE
Plse read the rules ,
and the following pinned thread:No More Non Technical Posts, Lost your Post...Read This


As this seems to happen more, we decided to hard moderate with sanctions authors of useless repetitive post and/or off topic post.

Anything that does not respect the intented purpose of the thread ( and in the context of the technical forum) will be removed.  

Note: If you want to have a non technical discussion on that product, plse find/start the appropriate thread in Xbox360 General, that said all technical post, discussion on how to use the features,  what can and cannot be done with the product... are all welcomed (IMG:style_emoticons/default/wink.gif) .


plse read the above carefully,
some people did not get it, so for every post I have to waste time removing there will be some time without posting at XS. Stick to technical subject of features, install, ... or find/start the appropriate thread in Xbox360 General for general discussion (and still respect the rules there (IMG:style_emoticons/default/wink.gif) )
Some post removed.

NOTE: This is not a political forum or for long negative analysis based purely on assumptions.

rgds, soso
Logged