Topic: Windows&bios Recognize Sata Card But Bios Keeps Saying No Drive Fo (Read 60 times)

yoruk66 · « **on:** February 24, 2007, 07:23:00 AM »

hello ,

I want to flash my ms25 .

I have bought a via vt 6421 serial ata card from ebay.

I installed everything and the card is beeing recognized by windows and bios .

When i put my xbox on and type mtkflas r /m orig.bin in dos it keeps saying No drive found .

What am i doing wrong ?

please help me

jabski · « **Reply #1 on:** February 24, 2007, 07:36:00 AM »

QUOTE(yoruk66 @ Feb 24 2007, 01:54 PM)

hello ,

I want to flash my ms25 .

I have bought a via vt 6421 serial ata card from ebay.

I installed everything and the card is beeing recognized by windows and bios .

When i put my xbox on and type mtkflas r /m orig.bin in dos it keeps saying No drive found .

What am i doing wrong ?

please help me

have you tried different sata ports on the card

yoruk66 · « **Reply #2 on:** February 24, 2007, 07:46:00 AM »

hello , yes i tried differend sata ports and different pci ports

jabski · « **Reply #3 on:** February 24, 2007, 07:51:00 AM »

how about using

CODE

mtkflash r /m /sara orig.bin

yoruk66 · « **Reply #4 on:** February 24, 2007, 08:08:00 AM »

yes i tried that too it doesnt work it keeps saying no drive found

yoruk66 · « **Reply #5 on:** February 24, 2007, 08:22:00 AM »

anybody ideas ?? i am desparate (IMG:style_emoticons/default/sad.gif) (IMG:style_emoticons/default/sad.gif)

jabski · « **Reply #6 on:** February 24, 2007, 08:36:00 AM »

how are you powering the drive ?? Through the 360 ??
Check all connections.
Check your mtkflash (i.e. use hexworkshop)

yoruk66 · « **Reply #7 on:** February 24, 2007, 08:49:00 AM »

i checked everything , can it be that it makes probleme because the sata card does have raid or something like that or that it must be recognized in bios .

somebody ideas ?/

DuBob4432 · « **Reply #8 on:** February 25, 2007, 11:25:00 PM »

when you boot up via the usb or floppy, what exactly do you see when you type the mtkflash command? i have a couple 6421A cards and what i viewed on screen was pri master, sec master and then xtreme as options, not the card like i viewed in the videos. i selected the xtreme option, did the 10 sec trick (have ms28) and it all worked (IMG:style_emoticons/default/smile.gif)

This post has been edited by DuBob4432: Feb 26 2007, 07:27 AM

Grim187 · « **Reply #9 on:** February 26, 2007, 12:21:00 AM »

i remember someone talking about a jumper setting, the stock way didn't work, doubt its on very many cards but its worth a look

FYI: only use the sata slot closes to the front of the computer

Author Topic: Windows&bios Recognize Sata Card But Bios Keeps Saying No Drive Fo (Read 60 times)