xboxscene.org forums

Author Topic: Some Clarification Please  (Read 75 times)

PC_Arcade

  • Archived User
  • Full Member
  • *
  • Posts: 155
Some Clarification Please
« on: November 30, 2006, 03:48:00 AM »
I have a Samsung MS25 flashed with 4.0a firmware, with the imminent arrival of the 5.x firmware I will want to reflash.

Am I correct in thinking that my drive is now an MS28 and therefore I need to get a VIA SATA card, or will I be able to reflash with my nforce4 board (the one I used for the ms25 flash)?

I had tried previously to reflash using the enable0800 disk burnt to a DL disk, but I didn't have much luck, is that due to the drive being an ms28 and incompatible with my chipset, or did the disk not burn properly?
Logged

PC_Arcade

  • Archived User
  • Full Member
  • *
  • Posts: 155
Some Clarification Please
« Reply #1 on: December 01, 2006, 07:58:00 AM »
bump
Logged

SvensK

  • Archived User
  • Newbie
  • *
  • Posts: 10
Some Clarification Please
« Reply #2 on: December 01, 2006, 08:16:00 AM »
500+ posts here and you still can't figure it out?
Logged

PC_Arcade

  • Archived User
  • Full Member
  • *
  • Posts: 155
Some Clarification Please
« Reply #3 on: December 01, 2006, 09:41:00 AM »
QUOTE(SvensK @ Dec 1 2006, 03:16 PM) *

500+ posts here and you still can't figure it out?


Thanks for your help (IMG:style_emoticons/default/rolleyes.gif)

FFS If I knew I wouldn't have posted.
Logged

krayzie

  • Archived User
  • Hero Member
  • *
  • Posts: 3350
Some Clarification Please
« Reply #4 on: December 01, 2006, 09:53:00 AM »
Did you try reading the readme that came with the firmware.
Logged

eppo

  • Archived User
  • Newbie
  • *
  • Posts: 10
Some Clarification Please
« Reply #5 on: December 01, 2006, 10:24:00 AM »
QUOTE(SvensK @ Dec 1 2006, 04:16 PM) *

500+ posts here and you still can't figure it out?


wtf does his post-count has to do with his knowledge?
are you really that shallow?
Logged

myfranco

  • Archived User
  • Sr. Member
  • *
  • Posts: 359
Some Clarification Please
« Reply #6 on: December 01, 2006, 11:06:00 AM »
No you don't need via sata card.You only need enable0800 disc.
It's nothing to do with ms25 or ms28(4.2x)
Logged

PC_Arcade

  • Archived User
  • Full Member
  • *
  • Posts: 155
Some Clarification Please
« Reply #7 on: December 03, 2006, 10:35:00 AM »
QUOTE(krayzie @ Dec 1 2006, 04:53 PM) *

Did you try reading the readme that came with the firmware.


Yes I did, which is why I said
QUOTE
I had tried previously to reflash using the enable0800 disk burnt to a DL disk, but I didn't have much luck, is that due to the drive being an ms28 and incompatible with my chipset, or did the disk not burn properly?


Thank you myfranco for having the decency to answer the question.
Logged