Print

[Liquidslim]

I have a Samsung (MS25) with Xtreme v3.3 The Manufactured Date is 4-16-2006.

Will it be safe for me to do the fall update? (Should I unplug dvd drive or not?)

Thanks A Lot.

*Just want to be sure.

[Daveychan]

Nothing new here.. just thought I'd add my bit:

I have an MS25 Toshiba-Samsung flashed with Xtreme 3.2 (created by the X360SAM.EXE) and updated to the new desktop version with no problems.  I did not remove my DVD connections.

(Tested and played my backups without any issues or hangs, including the latest game release, F.E.A.R.)

[mcding82]

done updat on ms28 hw005 and now keep gettin open tray error. can anybody help please iam u sing xtreme4.2a what can i do to fix this happens on cod3 and ultimate alliance

[SNAAAKE]

ok I know I should be reading more but I just checked the forum for like 20 minutes and couldnd find an answer. what exactly is the deal with the 42.a/b rev a package ? I see files for hitachi drives on it too, do I use this to flash hitaci drives too ?? thought hitachis didnt have x42 yet and hitachis werent effected by fall update. anyone  ??
thanks in advance..DOODS !

btw, I did flash a ms25 drive yesterday with the updated x42b and everything working perfect, no E66 error.

[diddyk]

I have a premium system that was manufactured in 1/06 so I'm assuming I have a MS25 Toshiba-Samsung . I haven't flashed my drive yet but I have downloaded the live update. I want to flash it but I'm not sure what will work and not brick my machine. Has anyone flashed an older system for the first time after installing the update? If so what was used and did it work?  

 Thanks  

[dbl]

Hey..

Just modded a MS-25 with 4.2 xtreme FW.

Did the update before i flashed the DVD.

Now im getting E66 as i turned it on after the flash, wtf :/

And now it seems i have problems to get the old stored fw back into the drive, it just hangs at "port : 9e0, Master/Slave a0"

Bitchass shit :x ..can anyone give me some advise?

To get the old FW back its "mtkflash w /sata orig.bin ... right?

peace, and thanks in advance yo

[sonny11]

Here is a qestion for you..

I have a new xbox360 with HL drive 47DH Firmware.

I plan on flashing it with Max v2.3 r2

I don't have any plans on going on xboxlive..

My question is do I need to install this Fall update for the 360 to work correctly or can I just leave off firmware on it?

[EMoNey1]

Can anyone confirm that unplugging the drive and updating does work?  Just want to be sure before I do it.

Thanks

[EMoNey1]

Can anyone confirm if the unplug is the solution or if it is just a coincidence?

[OriginalCompGeek]

QUOTE(dbl @ Nov 19 2006, 08:06 PM)

Hey..

Just modded a MS-25 with 4.2 xtreme FW.

Did the update before i flashed the DVD.

Now im getting E66 as i turned it on after the flash, wtf :/

And now it seems i have problems to get the old stored fw back into the drive, it just hangs at "port : 9e0, Master/Slave a0"

Bitchass shit :x ..can anyone give me some advise?

To get the old FW back its "mtkflash w /sata orig.bin ... right?

peace, and thanks in advance yo

chances are that a game will eventually include the update.

[donrapello]

QUOTE(eugenile @ Dec 4 2006, 10:21 AM)

I am having the exact same problem! It was fine flashing, then I get e66, and I try toi flash and it just hangs there.

well, i flashed one 360 with xtreme 4.2 and it went to e66 after that. ts-drive with ms25.
re-flashed with updated version of xtreme 4.2 and it's working just fine. just remember to use enable
0800-mode-disc if you have already flashed your drive.. you should understand that you aren't
able to read/write the firmware if 4.x xtreme is installed because the firmguard.. that's if you have read the readme.txt.

[oldhouse]

any news about updating dashboard while using hitachi 078fk hacked firmware by maximus tool 3.0?