Topic: Xbox Live Update (Read 1467 times)

Matt_Tracy · « **Reply #105 on:** October 31, 2006, 04:40:00 PM »

QUOTE(Techmaster @ Oct 31 2006, 05:33 PM)

I agree, these MS28's are a nightmare to flash...I got mine to work once, and I was not looking forward to having to do it again. But I just did it about 30mins ago, and it worked fine. So I say go for it, and report back if it worked. It should, seeing as it worked for me...

Yep, works fine.

MS28's aren't all that hard to flash, for me atleast. It's a much larger pain in the ass opening the 360. >_<

n00bal3r7 · « **Reply #106 on:** October 31, 2006, 04:41:00 PM »

one question , didnt wanted to open new thread .
soo does the 1080p work only on vga or does it work aswell over component , anyone tested this ?
because im gona get me a new tv now cause 1080i is last gen

would i need to buy a 360 vga cablem aswell?
im just a freaking graphics whore

thx

purepwnage12560 · « **Reply #107 on:** October 31, 2006, 04:48:00 PM »

brand new 360 (hitachi) not opened or anything applied update it rebooted and BAM im getting E71 now

thisisglen · « **Reply #108 on:** October 31, 2006, 04:55:00 PM »

QUOTE(purepwnage12560 @ Nov 1 2006, 12:55 AM)

brand new 360 (hitachi) not opened or anything applied update it rebooted and BAM im getting E71 now

pretty sure 71 is HDD. Take off the HDD and boot it and see what happens. Don't know why that could have happened though.

krakatomia · « **Reply #109 on:** October 31, 2006, 05:07:00 PM »

hi guys, im from venezuela, i bought my 360 used, i dont have the original firmware so , what should i do? if i encounter problems with this fall update, there's a way to get out of trouble considering that i can't go back to the original firmware? i'm sure somebody can help me with this, sorry about my english by the way, thanks in advance! greettings!

purepwnage12560 · « **Reply #110 on:** October 31, 2006, 05:11:00 PM »

i took the HDD off and it still give me the E71

OriginalCompGeek · « **Reply #111 on:** October 31, 2006, 05:14:00 PM »

QUOTE

E71: (not yet known)

Phunt · « **Reply #112 on:** October 31, 2006, 05:24:00 PM »

QUOTE(krakatomia @ Nov 1 2006, 12:14 AM)

hi guys, im from venezuela, i bought my 360 used, i dont have the original firmware so , what should i do? if i encounter problems with this fall update, there's a way to get out of trouble considering that i can't go back to the original firmware? i'm sure somebody can help me with this, sorry about my english by the way, thanks in advance! greettings!

Im not definate about this but i think you would be able to dump the firmware thats on there now and retreive your key from it and inject into another ORIG.bin from someone elses drive providing its the same make/model and firmware and voila you have yourself an orig.bin should you need to reflash after err66. If im wrong im wrong sorry.

lonsdale · « **Reply #113 on:** October 31, 2006, 05:51:00 PM »

im so lost, i managed to flash from 3.3 to original firmware, then with xtreme boot maker 3.5 i made a boot disk....did samread..samhack.....everything was ok
but yet still the red(360powerswitch) keeps burning....i think that means error66 rite.....what can i have done wrong..?

thnx in advance for the help

krakatomia · « **Reply #114 on:** October 31, 2006, 06:00:00 PM »

QUOTE(Phunt @ Oct 31 2006, 08:31 PM)

Im not definate about this but i think you would be able to dump the firmware thats on there now and retreive your key from it and inject into another ORIG.bin from someone elses drive providing its the same make/model and firmware and voila you have yourself an orig.bin should you need to reflash after err66. If im wrong im wrong sorry.

first of all thanks for that!, so maybe there's a way to do something, i must do the dump before updating? or can i do that after getting the error? sorry but im a real newbie

Phunt · « **Reply #115 on:** October 31, 2006, 06:09:00 PM »

QUOTE(krakatomia @ Nov 1 2006, 01:07 AM)

first of all thanks for that!, so maybe there's a way to do something, i must do the dump before updating? or can i do that after getting the error? sorry but im a real newbie

i would do it before you do the update personally and get yourself an orig.bin sorted out. Its always nice to have one just in case.

krakatomia · « **Reply #116 on:** October 31, 2006, 06:20:00 PM »

QUOTE(Phunt @ Oct 31 2006, 09:16 PM)

i would do it before you do the update personally and get yourself an orig.bin sorted out. Its always nice to have one just in case.

thx man, im calling someone who can do that for me because i dont know what tools should i use to dump and and recover the original firmware, and im waaay too scare of doing crap of my beauty box

OriginalCompGeek · « **Reply #117 on:** October 31, 2006, 06:24:00 PM »

Yes, you can dump your current modded firmware and put the key in an original firmware.

The problem is getting an original firmware. Not even the sites that walk the legal line and offer modded firmware downloads offer those.

Maybe ask the person you bought the 360 from if he has your original.

OriginalCompGeek · « **Reply #118 on:** October 31, 2006, 06:34:00 PM »

QUOTE(Phunt @ Oct 31 2006, 08:36 PM)

Couldnt someone on here just send him there's? or would that be illegal and against the rules

Things that may not be posted:

QUOTE

* Direct or indirect links to Xbox software (this includes retail games, backups, BIOSes, and MS XDK-compiled homebrew software)
NOTE: This includes links to .torrent files, OR sites that serve as a "tracker" for .torrent files.
* Any requests or offers for Xbox software (see above)
* Any requests or offers for game console ROMs (including, but not limited to Xbox, PSX, PS2, GameCube, All GameBoy, Nintendo, SNES, all Sega, arcade, etc.)

OriginalCompGeek · « **Reply #119 on:** October 31, 2006, 06:36:00 PM »

QUOTE(Phunt @ Oct 31 2006, 08:42 PM)

OOPS sorry

Not a problem, I can certainly see where one would wonder whether the original firmware is against the rules.

Author Topic: Xbox Live Update (Read 1467 times)