Topic: Hitachi Key Insertion Tutorial (Read 466 times)

Hackattack1979 · « **Reply #45 on:** November 14, 2006, 06:42:00 PM »

I bricked my old Hitachi GDR-3120L about 4 months ago And decided to order a new Toshiba TS-H943. I have the original bin from my hitachi! Will this tutorial work or is their an easier way to patch the new key to the samsung?

Junglelistic · « **Reply #46 on:** November 14, 2006, 08:35:00 PM »

Did you deleted the file? cause I may need it, if you could upload it again thanks.

Gazcoigne · « **Reply #47 on:** November 15, 2006, 04:57:00 AM »

QUOTE(Hackattack1979 @ Nov 15 2006, 01:13 AM)

I bricked my old Hitachi GDR-3120L about 4 months ago And decided to order a new Toshiba TS-H943. I have the original bin from my hitachi! Will this tutorial work or is their an easier way to patch the new key to the samsung?

once you have got the key correctly from the hitachi fw you simply insert it into the samsung fw and flash the complete fw image to the drive, no encryption is used for samsung.

and ps the link for the tutorial is still the same as the one on page 3

http://38.119.88.37/...torial_v1.2.PDF

its not hard to find it ie read the post!!

[GaZ]

Jx7 · « **Reply #48 on:** November 16, 2006, 04:04:00 PM »

there is an error in your link.

here is the good one:

http://www.yourfilehost.com/media.php?cat=...torial_v1.2.PDF

Gazcoigne · « **Reply #49 on:** November 20, 2006, 04:35:00 AM »

thanks can some1 update all the links??

messus · « **Reply #50 on:** November 20, 2006, 07:22:00 AM »

Great tutorial, I am eagerly awaiting my new 47DJ driver, will use this tut.

Question, can I use this procedure instead of running RESTORE.BAT to fully
restore my original firmware onto the drive??

The reason for me bricking my drive was because the RESTORE process hung
when restoring from Maximus GaryOPA 2.2 Stealth.

I also read others have experienced the same, so if putting your DVD-Drive
back into it's original state can also be done with this procedure, why not?

The RESTORE process goes through many steps, this only uses 1 !! (IMG:style_emoticons/default/smile.gif)

bricklayer · « **Reply #51 on:** November 20, 2006, 07:54:00 AM »

is any chance gazcoigne can help with maximus toolbox 2.0 and 0078fk drive?
expecting programmer soon,got spare chips and ready to go.
i can read chip with programmer,and get floating key with toolbox 2.0.
not really sure correct steps/stages in using toolbox 2.0 to prepare hacked firmware and key insertion.
do i just load xtreme v1.6 (currently recommended for 78fk) into toolbox 2.0 and copy and paste my own original key into box then encrypt?

any help please!

excaliburlives · « **Reply #52 on:** November 22, 2006, 07:00:00 PM »

I just tried to read your tut and the page seems to be down.
scratch that. i got it.

This post has been edited by excaliburlives: Nov 23 2006, 03:17 AM

Gazcoigne · « **Reply #53 on:** November 24, 2006, 03:29:00 AM »

right to answwer the many pm's here is the working link to the tutorial

http://www.yourfileh...torial_v1.2.PDF

i hope that everyone who likes it posts here in this thread to make thwe admin read it and pin the bloddy thing!!!

peace out

[GaZ]

rich100 · « **Reply #54 on:** November 24, 2006, 10:14:00 AM »

bump, very useful, thanks (IMG:style_emoticons/default/smile.gif)

FUAS · « **Reply #55 on:** November 25, 2006, 05:17:00 PM »

nice tut. friend of mines drive has packed in. reads cdr and normal dvds but no games (used to just failed one day) can hear a horrid scratching noise like its trying to read. but allways fails. hes gone to get a new drive and muggens here got the job to fit it (hehe). been looking for hints on this then found this tut. exelenet work on it gaz saved it local so when I do the drive I dont have to hunt it down. but it looks straight foward enough.

dajuice · « **Reply #56 on:** November 25, 2006, 04:53:00 PM »

Yeah save the tut because you never know when you will need it. Gazcoigne's tut saved my 360 from turning into a permanent doorstop. The tutorial is pretty easy to understand and straight-forward. Great work Gaz and thanks again.

Gazcoigne · « **Reply #57 on:** November 28, 2006, 04:09:00 AM »

thanks for the support guys im hoping to update it soon with info for changing drive id in both hitachi and samsung fw, if i can get time with my new job lol.

langnao · « **Reply #58 on:** November 28, 2006, 06:51:00 AM »

QUOTE(Gazcoigne @ Nov 28 2006, 07:16 PM)

thanks for the support guys im hoping to update it soon with info for changing drive id in both hitachi and samsung fw, if i can get time with my new job lol.

(IMG:style_emoticons/default/beerchug.gif)

Yeah, most swapping of drives will require you to change the drive model other than injecting the key alone. Maybe can ask myfranco to help out with the tutorial since we spent some time discussing on the various aspect and the most important, he verified the swapping of samsung to hitachi drive at the following thread http://forums.xbox-scene.com/index.php?sho...9861&st=135

Gazcoigne · « **Reply #59 on:** November 29, 2006, 04:56:00 AM »

QUOTE(langnao @ Nov 28 2006, 01:22 PM)

Yeah, most swapping of drives will require you to change the drive model other than injecting the key alone. Maybe can ask myfranco to help out with the tutorial since we spent some time discussing on the various aspect and the most important, he verified the swapping of samsung to hitachi drive at the following thread http://forums.xbox-s...o...9861&st=135

Thanks a lot that link is very informative i had missed it.

i will hopefully get this info added into the tutorial soon and will update this post with a new link to the tutorial.

Author Topic: Hitachi Key Insertion Tutorial (Read 466 times)