Topic: Hitachi Key Insertion Tutorial (Read 463 times)

gp00 · « **Reply #105 on:** December 04, 2007, 12:24:00 PM »

QUOTE(juan23 @ Nov 28 2007, 07:21 PM)

great tutorial guys, been reading it since day 1.

of course now I have a bricked Hitachi rom version 46dh. I am now replacing with rom version 59. I understand that I have to replace the key, no problem there, however since these are hitachis both do I still need to spoof my new 59 to the older 46 for my xbox to read it properly? I am also using Maximus version 4.0 now.

I have all the keys that are needed from old and new drives as well.

Step 1 inject old original 46dh key into new 59 drive
Step 2 encrypt new firmware
Step 3 Flash with new original.
Step 4 ?? do I need to spoof or can I leave it alone.
Step 5 ?? Also when I flash with iextreme do I use the 46 FW or the 59FW.

I can complete from there no problem, sorry hadnt had to flash a drive since 1st release.

TIA for all the help.

Exactly the same problem as juan23. Have a 46 and i am replacing with a 59 drive. Any help with the issues above would be great.

Cheers,

od3m · « **Reply #106 on:** December 23, 2007, 04:44:00 AM »

would you plz update the link to your tutorial

thx a lot

chevellecrazy600 · « **Reply #107 on:** January 08, 2008, 06:04:00 PM »

that ste wont let me DL the tut. it tells me to turn cookies on, and i did for all of my internet browsers and it still doesnt work..... any other sites that its on? is it too big to be emailed? thanks

Vrtclhykr · « **Reply #108 on:** January 11, 2008, 06:15:00 PM »

Yes I have the same problem trying to download this pdf. I have tried 3 computers and 3 different browsers. It gives error every time. I need to replace a 79fl with a MS28.

Ranger72 · « **Reply #109 on:** January 11, 2008, 06:26:00 PM »

QUOTE(Vrtclhykr @ Jan 12 2008, 02:51 AM)

Yes I have the same problem trying to download this pdf. I have tried 3 computers and 3 different browsers. It gives error every time. I need to replace a 79fl with a MS28.

After installing the PassKey and extracting the firmware from the drive and creating a orig.bin file of your Hitachi 79 firmware put it in your Samsung ixtreme folder. Then click (Make iXtreme firmware.cmd) and make sure you select to have it spoof the firmware as Hitachi 79. Flash that firmware to your samsung drive and you are good to go.

Vrtclhykr · « **Reply #110 on:** January 11, 2008, 07:18:00 PM »

thanks Ranger. Just before you posted I dumped the new MS28 then used toolbox 4.6 to replace the key and then used the tools/spoof firmware option. Toolbox now shows rom version as MS28 and spoofed as 0079.

Is this a proper process as well or should I not be using tool box for this?

Cheers, VrT

Ranger72 · « **Reply #111 on:** January 11, 2008, 09:03:00 PM »

QUOTE(Vrtclhykr @ Jan 12 2008, 03:54 AM)

thanks Ranger. Just before you posted I dumped the new MS28 then used toolbox 4.6 to replace the key and then used the tools/spoof firmware option. Toolbox now shows rom version as MS28 and spoofed as 0079.

Is this a proper process as well or should I not be using tool box for this?

Cheers, VrT

Yes that is another way to do it as well.

Vrtclhykr · « **Reply #112 on:** January 12, 2008, 01:30:00 AM »

I think that this thread needs some serious updating if this is the case. I read through pages and pages of post talking about changing hex editing in order to change drives. Saving the fw.bin file as numerous different names to facilitate the editing etc. etc. With countless links to other posts on the same issue.
Not to mention that not a single link for this tutorial seems to work.

So the reality is:

You can use either
1) iXtreme firmware.cmd from the ixtreme package
2) Firmware tool box 4.6 - tools/spoof firmware.

IT IS THAT SIMPLE?

Cheers to all the figure this shite out for us.

VrT

chevellecrazy600 · « **Reply #113 on:** January 12, 2008, 11:42:00 AM »

lol thats still doesnt help witht he actual procedure of doing the swap. im new to this kind of stuff. so if anyone has the tut downloaded already that wouldnt mind sending it to me via email, please pm me. thanks.

qfel · « **Reply #114 on:** January 13, 2008, 02:44:00 AM »

all mirrors to this tutorial are dead, can someone pleeeeeeeeeeease post working one?

Vrtclhykr · « **Reply #115 on:** January 13, 2008, 08:05:00 PM »

Don't worry about the tutorial. Just read the last page of this post.
I figured from reading through all this it would be difficult.

IT iS NOT.
Use toolbox 4.6

or firmware.cmd in ixtreme package.

SOooo simple.

pike · « **Reply #116 on:** January 14, 2008, 04:17:00 AM »

was looking for this file myself today, damn annoying when the link everyone mentions is DEAD

here's a new link, looks like filename was slightly altered

http://www.megaupload.com/?d=0FK2UP2R

correct filename should be: hitachi_key_insertion_tutorial_v1.2.pdf

might I suggest you upload to your favourite site so we have a couple of "Mirrors".

Note, many upload sites deletes files when they are inactive for 30 days

chevellecrazy600 · « **Reply #117 on:** January 15, 2008, 04:05:00 PM »

got the tut from the toolbox folder. needed WINRAR though. im such a noob. lol

jingojango · « **Reply #118 on:** January 18, 2009, 10:55:00 PM »

Quick question regarding this tutorial-

I'm replacing a dead Samsung ms28 with a working Hitachi 3120L. Is everything in this still applicable? I don't care so much about playing backups, because all my discs are fairly well kept. I absolutely do not want to be banned from Live- that won't be a problem will it?

JAMMO · « **Reply #119 on:** December 21, 2009, 03:13:00 PM »

Nice one thanks

Author Topic: Hitachi Key Insertion Tutorial (Read 463 times)