Topic: Mtkflash (Read 59 times)

j3y q · « **on:** September 20, 2006, 12:17:00 AM »

when ever i use mtkflash i keep getting drive not dectected but when i get the option to boot i see the ts-h943 so i know it se my drive please help thanks

Eric Jr. · « **Reply #1 on:** September 20, 2006, 12:44:00 AM »

Did you use the /sata switch?
What sata chipset do you have?
Did you edit mtkflash?

Give us some more info, tell us what your configuration looks like ..

j3y q · « **Reply #2 on:** September 20, 2006, 01:06:00 AM »

1. i didnt use the sata witch and what is that
2.heres is my chipset ASUS PTGV-LM Motherboard with Southbridge: ICH6 Chipset
3.no i didnt edit mtkflash
Name   Intel® 82801FB/FBM Ultra ATA Storage Controllers - 266F
Manufacturer   Intel
Status   OK
PNP Device ID   PCI\VEN_8086&DEV_266F&SUBSYS_2A2D103C&REV_03\3&11583659&0&F9
I/O Port   0x0000FFA0-0x0000FFAF
Driver   c:\windows\system32\drivers\pciide.sys (5.1.2600.0 (XPClient.010817-1148), 3.25 KB (3,328 bytes), 8/9/2004 4:00 PM)

Name   Primary IDE Channel
Manufacturer   (Standard IDE ATA/ATAPI controllers)
Status   OK
PNP Device ID   PCIIDE\IDECHANNEL\4&1B433896&0&0
I/O Port   0x000001F0-0x000001F7
I/O Port   0x000003F6-0x000003F6
IRQ Channel   IRQ 14
Driver   c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/9/2004 4:00 PM)

Name   Intel® 82801FB Ultra ATA Storage Controllers - 2651
Manufacturer   Intel
Status   OK
PNP Device ID   PCI\VEN_8086&DEV_2651&SUBSYS_2A2D103C&REV_03\3&11583659&0&FA
I/O Port   0x0000B000-0x0000B007
I/O Port   0x0000A800-0x0000A803
I/O Port   0x0000A400-0x0000A407
I/O Port   0x0000A000-0x0000A003
I/O Port   0x00009800-0x0000980F
IRQ Channel   IRQ 19
Driver   c:\windows\system32\drivers\pciide.sys (5.1.2600.0 (XPClient.010817-1148), 3.25 KB (3,328 bytes), 8/9/2004 4:00 PM)

Name   Primary IDE Channel
Manufacturer   (Standard IDE ATA/ATAPI controllers)
Status   OK
PNP Device ID   PCIIDE\IDECHANNEL\4&26B6486F&0&0
Driver   c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/9/2004 4:00 PM)
thats what i get when i enter system info

Eric Jr. · « **Reply #3 on:** September 20, 2006, 01:54:00 AM »

The /sata switch can help with sata detection from within mtkflash, exact details I don't know .. use it like so:

mtkflash r /m /sata orig.bin

Futhermore you may need to hexedit mtkflash so that it recognizes you sata controller and knows how to use it. Basically you need to add a deviceid to it ..

http://forums.xbox-scene.com/index.php?showtopic=514126

Although, there is a new formatter out there that patches mtkflash for you based on your sata controller, I highly recommend using it before editing it manually.

http://forums.xbox-scene.com/index.php?showtopic=548746

good luck

Author Topic: Mtkflash (Read 59 times)