Topic: Editing Mtkflash To Work With Your Sata Chipset (Read 52 times)

WhiteBoy · « **on:** August 16, 2006, 07:37:00 PM »

First off want to say that I am new at Hex editors and Sata in general. I am learning allot about Sata since I became interested in modifying my 360.

Here is the information about the Sata Card
I am having trouble figuring out how to edit my MTKFlash and I have looked a Grimm's tutorial and I am stumped. Any help would be appreciated thanks in advanced.

Name   VIA VT6421 RAID Controller
Manufacturer   VIA Technologies, Inc.
Status   OK
PNP Device ID   PCI\VEN_1106&DEV_3249&SUBSYS_32491106&REV_50\4&2E98101C&0&10F0
I/O Port   0x0000BC00-0x0000BC0F
I/O Port   0x0000B800-0x0000B80F
I/O Port   0x0000B400-0x0000B40F
I/O Port   0x0000B000-0x0000B00F
I/O Port   0x0000AC00-0x0000AC1F
I/O Port   0x0000A800-0x0000A8FF
IRQ Channel   IRQ 17
Driver   c:\windows\system32\drivers\viamraid.sys (5.1.2600.410, 59.25 KB (60,672 bytes), 8/16/2006 8:54 PM)


Name   VAXSCSI Controller
Manufacturer   (Standard mass storage controllers)
Status   OK
PNP Device ID   ACPI\PNPA000\4&3D980712&0
I/O Port   0x0000FFE0-0x0000FFEF
IRQ Channel   IRQ 9
Driver   c:\windows\system32\drivers\vaxscsi.sys (, 217.90 KB (223,128 bytes), 3/5/2006 5:58 PM)

Also is the VAXSCSI controller a sata raid controller too?

jameswalter · « **Reply #1 on:** August 16, 2006, 08:38:00 PM »

Wow....don't even know how to say this.....YOU POSTED A NEW TOPIC THAT HAS THE EXACT SAME NAME AS A HUGE TOPIC THAT WILL HELP YOU SOLVE THIS....WHY???

llsTixll · « **Reply #2 on:** August 16, 2006, 11:33:00 PM »

Here you go...use this mtkflash...

http://rapidshare.de/files/29672623/MTKFLASHvia32.zip.html

WhiteBoy · « **Reply #3 on:** August 17, 2006, 06:23:00 AM »

Thanks llsTixll

rodpad · « **Reply #4 on:** August 17, 2006, 11:18:00 AM »

Yeah, I'm really sorry to advocate posts like this, but I too had no clue as to what I should inject and really need help (yeah yeah I know about the other thread, but it's so big now that it's being mostly ignored)

My msinfo:

Name   VIA SATA RAID Controller
Manufacturer   VIA Technologies, Inc.
Status   OK
PNP Device ID   PCI\VEN_1106&DEV_3149&SUBSYS_31491106&REV_80\3&61AAA01&0&78
I/O Port   0x00009C00-0x00009C07
I/O Port   0x0000A000-0x0000A003
I/O Port   0x0000A400-0x0000A407
I/O Port   0x0000A800-0x0000A803
I/O Port   0x0000AC00-0x0000AC0F
I/O Port   0x0000B000-0x0000B0FF
IRQ Channel   IRQ 11
Driver   c:\winxp\system32\drivers\viamraid.sys (5.1.2600.530, 98.63 KB (100,992 bytes), 31/03/2006 02:18)

Name   SCSI/RAID Host Controller
Manufacturer   (Standard mass storage controllers)
Status   OK
PNP Device ID   ACPI\PNPA000\4&40215603&1
I/O Port   0x0000FFE0-0x0000FFEF
IRQ Channel   IRQ 9
Driver   c:\winxp\system32\drivers\dtscsi.sys (, 217.90 KB (223,128 bytes), 12/08/2006 12:59)

Thanks in advance - I WILL flash my V28 (IMG:style_emoticons/default/smile.gif)

h16h · « **Reply #5 on:** February 04, 2007, 07:23:00 PM »

First off, any help is really appreciated.
I'm in my MSINFO32 and Under scsi or IDE i do not see any SATA
I am using asus p4p800se ICH5

Name   VAXSCSI Controller
Manufacturer   (Standard mass storage controllers)
Status   OK
PNP Device ID   ACPI\PNPA000\4&432BE725&0
I/O Port   0x0000FFE0-0x0000FFEF
IRQ Channel   IRQ 9
Driver   c:\windows\system32\drivers\vaxscsi.sys (, 217.90 KB (223,128 bytes), 11/28/2006 9:01 PM)

thats all i see under scsi
is that my sata controller ?

Thanks again..

Grim187 · « **Reply #6 on:** February 04, 2007, 07:54:00 PM »

QUOTE(WhiteBoy @ Aug 16 2006, 05:08 PM)

First off want to say that I am new at Hex editors and Sata in general. I am learning allot about Sata since I became interested in modifying my 360.

Here is the information about the Sata Card
I am having trouble figuring out how to edit my MTKFlash and I have looked a Grimm's tutorial and I am stumped. Any help would be appreciated thanks in advanced.

Name   VIA VT6421 RAID Controller
Manufacturer   VIA Technologies, Inc.
Status   OK
PNP Device ID   PCI\VEN_1106&DEV_3249&SUBSYS_32491106&REV_50\4&2E98101C&0&10F0
I/O Port   0x0000BC00-0x0000BC0F
I/O Port   0x0000B800-0x0000B80F
I/O Port   0x0000B400-0x0000B40F
I/O Port   0x0000B000-0x0000B00F
I/O Port   0x0000AC00-0x0000AC1F
I/O Port   0x0000A800-0x0000A8FF
IRQ Channel   IRQ 17
Driver   c:\windows\system32\drivers\viamraid.sys (5.1.2600.410, 59.25 KB (60,672 bytes), 8/16/2006 8:54 PM)


Name   VAXSCSI Controller
Manufacturer   (Standard mass storage controllers)
Status   OK
PNP Device ID   ACPI\PNPA000\4&3D980712&0
I/O Port   0x0000FFE0-0x0000FFEF
IRQ Channel   IRQ 9
Driver   c:\windows\system32\drivers\vaxscsi.sys (, 217.90 KB (223,128 bytes), 3/5/2006 5:58 PM)

Also is the VAXSCSI controller a sata raid controller too?

Via VT6421L: 0611 4932 F001 7001

Via VT6421A: 0611 4932 00BC 00B4

go to step 3 of my tut to learn how to inject it (link in sig)

QUOTE(rodpad @ Aug 17 2006, 08:49 AM)

Yeah, I'm really sorry to advocate posts like this, but I too had no clue as to what I should inject and really need help (yeah yeah I know about the other thread, but it's so big now that it's being mostly ignored)

My msinfo:

Name   VIA SATA RAID Controller
Manufacturer   VIA Technologies, Inc.
Status   OK
PNP Device ID   PCI\VEN_1106&DEV_3149&SUBSYS_31491106&REV_80\3&61AAA01&0&78
I/O Port   0x00009C00-0x00009C07
I/O Port   0x0000A000-0x0000A003
I/O Port   0x0000A400-0x0000A407
I/O Port   0x0000A800-0x0000A803
I/O Port   0x0000AC00-0x0000AC0F
I/O Port   0x0000B000-0x0000B0FF
IRQ Channel   IRQ 11
Driver   c:\winxp\system32\drivers\viamraid.sys (5.1.2600.530, 98.63 KB (100,992 bytes), 31/03/2006 02:18)

Name   SCSI/RAID Host Controller
Manufacturer   (Standard mass storage controllers)
Status   OK
PNP Device ID   ACPI\PNPA000\4&40215603&1
I/O Port   0x0000FFE0-0x0000FFEF
IRQ Channel   IRQ 9
Driver   c:\winxp\system32\drivers\dtscsi.sys (, 217.90 KB (223,128 bytes), 12/08/2006 12:59)
Thanks in advance - I WILL flash my V28 (IMG:style_emoticons/default/smile.gif)

Via VT6421L: 0611 4932 F001 7001

Via VT6421A: 0611 4932 009C 0094

go to step 3 of my tut to learn how to inject it (link in sig)

QUOTE(h16h @ Feb 4 2007, 05:54 PM)

First off, any help is really appreciated.
I'm in my MSINFO32 and Under scsi or IDE i do not see any SATA
I am using asus p4p800se ICH5

Name   VAXSCSI Controller
Manufacturer   (Standard mass storage controllers)
Status   OK
PNP Device ID   ACPI\PNPA000\4&432BE725&0
I/O Port   0x0000FFE0-0x0000FFEF
IRQ Channel   IRQ 9
Driver   c:\windows\system32\drivers\vaxscsi.sys (, 217.90 KB (223,128 bytes), 11/28/2006 9:01 PM)
thats all i see under scsi
is that my sata controller ?

Thanks again..

1. Read my TUT
2. Install Your Driver
3. Learn That ICH5 Dosent Require that you Edit MTKflash.

Sorry That i Haven't Been Paying to Much Attention to My TUT, i Know A lot of you Still Have Problems, I Suggest that You read it over 3 or More times Then if you still cant Rap Your Head Around it Send me an E-mail With Your MSinfo and ill send Back a Edited Mtkflash File

-PK- · « **Reply #7 on:** February 04, 2007, 10:53:00 PM »

QUOTE(Grim187 @ Feb 5 2007, 03:25 AM)

go to step 3 of my tut to learn how to inject it (link in sig)
Via VT6421L: 0611 4932 F001 7001

Via VT6421A: 0611 4932 009C 0094

Should the 2nd one be:
Via VT6421A: 0611 4932 009C 00A4

This post has been edited by -PK-: Feb 5 2007, 06:54 AM

Author Topic: Editing Mtkflash To Work With Your Sata Chipset (Read 52 times)