eXOBeX released X360SAM v0.2, a DOS-based key copier for Toshiba-Samsung drives:
This one uses Sniperkilla's method of patching (copy $4000-$43FF from original firmware, the rest from the hacked firmware) as KDX 1.5 ballsed it up when I tried it on my own 360.
The original X360SAM only copied $4000-$41FF of the key range. This turned out to work for some drives, but not all. Version 0.2 addresses this by copying $4000-$43FF instead.
From the readme:
X360SAM is a small MSDOS application which will take your original Samsung firmware plus a hacked firmware (such as XTREME.BIN) and will create a new hacked firmware containing the correct DVD key. This is done using Sniperkilla's method (copying bytes $4000-$43FF from the original file).
Usage: x360sam <original fw> <master hacked fw> <new fw>
e.g.: x360sam orig.bin xtreme.bin hacked.bin
Note: it does not support long file names - use the short versions please!
Also included are three batch files:-
* SAMREAD.BAT
To run this, type SAMREAD followed by the Xbox serial number, e.g. SAMREAD 1234567 61005. This will create a folder especially for that Xbox, read the firmware from the drive, storing it in the folder as ORIG.BIN. It will then use X360SAM.EXE to create a hacked version (called HACKED.BIN), storing it in the same folder.
* SAMHACK.BAT
To run this, type SAMHACK followed by the Xbox serial number, e.g. SAMHACK 1234567 61005. This flashes the HACKED.BIN file (created by SAMREAD.BAT) onto the drive.
* SAMORIG.BAT
To run this, type SAMORIG followed by the Xbox serial number, e.g. SAMORIG 1234567 61005. This flashes the ORIG.BIN file (created by SAMREAD.BAT) back onto the drive.
*** USE AT YOUR OWN RISK - DON'T BLAME ME IF ANYTHING GOES WRONG ***
VERSION HISTORY:
0.2 - Key area increased in size from $4000-$41FF to $4000-$43FF
(release delayed, hence support for XTREME30.BIN which came out later)
0.1 - Initial release
Download: here
News-Source: xboxhacker.net
|
Author
Topic: X360SAM 0.2 - DOS-based key copier for Samsung drives (Read 39 times)