Topic: Xecuter 360 Homemade Modchip Project - Preliminary Details (Read 87 times)

Xbox-Scene · « **on:** August 09, 2006, 03:10:00 PM »

Xecuter 360 Homemade Modchip Project - Preliminary Details
Posted by XanTium | August 9 17:10 EST

(IMG:http://www.burstnet.com/cgi-bin/ads/ad9520b.cgi/ns/v=2.1S/sz=300x250A/

Team-xecuter.com posted more details about their XHM Project where they'll release all info/schematics and sourcecode that will allow you to make a homemade DVD patchmod for Xbox360:

Quote

Here's a few preliminary details of the project

We decided on using Ubicom SX series of chips. It will work on any chip from SX18 upwards. Decision to do this was 3 fold:
1. There are a lot of ppl out there who can understand the language. Many of the PS2 homebrew projects were done using this PIC (ICE Modchip Project etc).
2. Its one of the fastest pics - does a lot of jobs that a cpld would do (not as good granted - but easier for hobbiests to work with)
3. There are a shat load of docs on this chip and language. Plus there are loads of homebrew programmers available - the best being "Fluffy2" - http://www.semis.demon.co.uk/Sx/SXmain.htm
4. Its cheap. You can source the pics from $1 upto $5 - not hard to find. Ive asked one of our suppliers to see if they can get large batchs to give out to retailers at cost - but google is your friend also (example here)
5. You don't need to use a pcb - although we will rls a schemtic for those who have the facilities. You can get PCB's made for about $1-$2 - no doubt a few stores will supply hobbiests.

We have worked hard on getting the current code to be as efficient as possible. For a PIC it works really well and you should get a lot of fun out of it as its an easy language plus its only 30 odd lines of code - its not that hard at all !

I hope to get a release to you from tomorrow - just working on state listings and timing diagrams for the patching area`s

This is the pin out for an SX18 to the Samsung Drive:
SX18 pins --- samsung fw pin
6 - RB0 13 - D0
7 - RB1 14 - D1
8 - RB2 15 - D2
9 - RB3 17 - D3
10 - RB4 18 - D4
11 - RB5 19 - D5
12 - RB6 20 - D6
13 - RB7 21 - D7
14 - 5v volts any earth
5 - earth 5 volt rails
SX Pin 4 Linked to SX Pin 14

If you are interested in the project and are going to have a go - GOOD LUCK!
If you're gonna bitch don't bother - we've heard it all before.

Official Site: http://www.team-xecuter.com

Gabbiani · « **Reply #1 on:** August 09, 2006, 02:27:00 PM »

Can't wait. Read the news on the frontpage earlier today.

How are things looking with the Hitachi?

Spodie · « **Reply #2 on:** August 09, 2006, 02:38:00 PM »

nOOb question everybody

I just started learning to build circuits & program a Parallax Basic Stamp. Is this project gonna be way beyond me?

jtom617 · « **Reply #3 on:** August 09, 2006, 02:57:00 PM »

QUOTE(Spodie @ Aug 9 2006, 09:45 PM)

nOOb question everybody

I just started learning to build circuits & program a Parallax Basic Stamp. Is this project gonna be way beyond me?

i would think not!, good read.. (IMG:style_emoticons/default/biggrin.gif)

Woore · « **Reply #4 on:** August 09, 2006, 03:00:00 PM »

Ill give a try

flashfreak · « **Reply #5 on:** August 09, 2006, 03:18:00 PM »

Looks simple enough. Just gotta hook the power backwards on the chip (IMG:style_emoticons/default/tongue.gif) One of the first things i noticed. If its not meant to be that way, then u'd better fix the tut now, otherwise ur gonna have a lot of unhappy campers!

Heet · « **Reply #6 on:** August 09, 2006, 04:21:00 PM »

Sounds good to me. Thanks Xecuter. (IMG:style_emoticons/default/smile.gif)

erm...and uberfry

http://www.xboxhacker.net/forums/index.php?topic=2812.0 (IMG:style_emoticons/default/smile.gif)

This post has been edited by Heet: Aug 9 2006, 11:26 PM

XtuRmN8r · « **Reply #7 on:** August 09, 2006, 05:14:00 PM »

Haha... I love you team xecuter... "If you're gonna bitch don't bother - we've heard it all before." Put them in their place.. Great advice, tough love.. just what some ppl need! You guys are awesome.

GeToChKn · « **Reply #8 on:** August 09, 2006, 05:22:00 PM »

Does anyone know where to buy premade fluffy 2 programmers?

0794 · « **Reply #9 on:** August 09, 2006, 06:02:00 PM »

this project sounds like a good deal for the community...especially since there will be one mediator to help keep things simple...all these firmwares coming out is insane!

X-Staff · « **Reply #10 on:** August 10, 2006, 05:01:00 AM »

QUOTE(GeToChKn @ Aug 10 2006, 12:29 AM)

Does anyone know where to buy premade fluffy 2 programmers?

im looking at doing an improved version to sell cheaply in kit form so you can put it together yourselves - the idea of the this project is to educate and for you to have some fun with building your own devices (IMG:style_emoticons/default/smile.gif)

im sure there are other sites that sell fluffy kits too - ive not checked myself

Author Topic: Xecuter 360 Homemade Modchip Project - Preliminary Details (Read 87 times)