Topic: " No Drive Detected " Plz Help (Read 52 times)

crackthepapa · « **on:** July 18, 2006, 12:00:00 PM »

HI TO YOU ALL

NEED SOME REAL HELP WITH FLASHING MY TS-H943 DRIVE

I HAVE AN ASUS P5LD2-VM BORD

I MADE A USB BOOT STICK WITH mtk183c

DISCONNECTID ALL OTHER IDE/SATA

WHEN I TRY TO FLASH I GET " NO DRIVE DETECTED "

PLZ HELP ME GUYS
THX

bonevichio · « **Reply #1 on:** July 18, 2006, 12:15:00 PM »

Have you hex-edited the mtkflash file for your chipset?

crackthepapa · « **Reply #2 on:** July 18, 2006, 12:23:00 PM »

QUOTE(bonevichio @ Jul 18 2006, 09:22 AM)

Have you hex-edited the mtkflash file for your chipset?

no i didnt
can you give some more info on how to hex-edited the mtkflash for my P5LD2-VM
caz i am a little bit lost/noob in this area
thx

crackthepapa · « **Reply #3 on:** July 18, 2006, 12:56:00 PM »

QUOTE(crackthepapa @ Jul 18 2006, 09:30 AM)

no i didnt
can you give some more info on how to hex-edited the mtkflash for my P5LD2-VM
caz i am a little bit lost/noob in this area
thx

ok so found a guide on how to hex-edited the mtkflash
but need help finiding this to liens that 7bytes difference
her is my SCSI info :

Name   ITE IT8211 ATA/ATAPI Controller
Manufacturer   Integrated Technology Express, Inc.
Status   OK
PNP Device ID   PCI\VEN_1283&DEV_8211&SUBSYS_81381043&REV_11\4&CF81C54&0&20F0
I/O Port   0x0000C800-0x0000C807
I/O Port   0x0000C400-0x0000C403
I/O Port   0x0000C000-0x0000C007
I/O Port   0x0000B800-0x0000B803
I/O Port   0x0000B400-0x0000B40F
IRQ Channel   IRQ 19
Driver   c:\windows\system32\drivers\iteatapi.sys (v1.3.2.0, 24.83 KB (25,424 bytes), 7/14/2006 10:44 PM)

Name   SCSI/RAID Host Controller
Manufacturer   (Standard mass storage controllers)
Status   OK
PNP Device ID   ACPI\PNPA000\4&56BC44A1&0
I/O Port   0x0000FFE0-0x0000FFEF
IRQ Channel   IRQ 9
Driver   c:\windows\system32\drivers\dtscsi.sys (, 217.90 KB (223,128 bytes), 7/15/2006 12:54 PM)

THX (IMG:style_emoticons/default/rolleyes.gif)

Runkster · « **Reply #4 on:** July 18, 2006, 01:37:00 PM »

QUOTE(crackthepapa @ Jul 18 2006, 06:07 PM)

HI TO YOU ALL

NEED SOME REAL HELP WITH FLASHING MY TS-H943 DRIVE

I HAVE AN ASUS P5LD2-VM BORD

I MADE A USB BOOT STICK WITH mtk183c

DISCONNECTID ALL OTHER IDE/SATA

WHEN I TRY TO FLASH I GET " NO DRIVE DETECTED "

PLZ HELP ME GUYS
THX

I had a similar problem with a TS-H943. The onboard SATA in 2 of my computers would not recognize the drive. The third PC I tried worked with no problems. If it is not recognized by the controller durring the POST (system boot) first it will not be recognized regardless of what hex editing you do. Make sure your SATA controller is seeing the drive first in the PCs BIOS.

It will usually be listed as one of the bootable devices in the BIOS if it is recognized by your system properly.

Hope this helps,
Runk

This post has been edited by Runkster: Jul 18 2006, 08:38 PM

crackthepapa · « **Reply #5 on:** July 19, 2006, 01:43:00 AM »

QUOTE(Runkster @ Jul 18 2006, 10:44 AM)

I had a similar problem with a TS-H943. The onboard SATA in 2 of my computers would not recognize the drive. The third PC I tried worked with no problems. If it is not recognized by the controller durring the POST (system boot) first it will not be recognized regardless of what hex editing you do. Make sure your SATA controller is seeing the drive first in the PCs BIOS.

It will usually be listed as one of the bootable devices in the BIOS if it is recognized by your system properly.

Hope this helps,
Runk

The bios recognizing the 360 dvd drive as sec master
and still i get "no drive detected"
so its have to be done with hex editing the mtkflah

can someone help me with it plz !!!
no one here hex edited the mtkflash for the ASUS P5LD2-VM before ?

This post has been edited by crackthepapa: Jul 19 2006, 08:48 AM

temporary_idiot · « **Reply #6 on:** August 20, 2006, 04:21:00 AM »

I am having the same problem... th strange thing is, that it used to work... i did 1 hitachi, and 1 samsung...

if u have fixed this, please let me know here... (IMG:style_emoticons/default/tongue.gif)

EDIT:: i have a P5LD2-VM DH

This post has been edited by temporary_idiot: Aug 20 2006, 11:22 AM

Exobex · « **Reply #7 on:** August 20, 2006, 04:58:00 AM »

QUOTE(temporary_idiot @ Aug 20 2006, 11:28 AM)

I am having the same problem... th strange thing is, that it used to work... i did 1 hitachi, and 1 samsung...

if u have fixed this, please let me know here... (IMG:style_emoticons/default/tongue.gif)

EDIT:: i have a P5LD2-VM DH

If it used to work, try a different SATA cable. Another thing that can make a difference is the "PnP OS enable/disable" option in the BIOS.

QUOTE(crackthepapa @ Jul 18 2006, 08:03 PM)

ok so found a guide on how to hex-edited the mtkflash
but need help finiding this to liens that 7bytes difference
her is my SCSI info :
Name   ITE IT8211 ATA/ATAPI Controller
Manufacturer   Integrated Technology Express, Inc.
Status   OK
PNP Device ID   PCI\VEN_1283&DEV_8211&SUBSYS_81381043&REV_11\4&CF81C54&0&20F0
I/O Port   0x0000C800-0x0000C807
I/O Port   0x0000C400-0x0000C403
I/O Port   0x0000C000-0x0000C007
I/O Port   0x0000B800-0x0000B803
I/O Port   0x0000B400-0x0000B40F
IRQ Channel   IRQ 19
Driver   c:\windows\system32\drivers\iteatapi.sys (v1.3.2.0, 24.83 KB (25,424 bytes), 7/14/2006 10:44 PM)
Name   SCSI/RAID Host Controller
Manufacturer   (Standard mass storage controllers)
Status   OK
PNP Device ID   ACPI\PNPA000\4&56BC44A1&0
I/O Port   0x0000FFE0-0x0000FFEF
IRQ Channel   IRQ 9
Driver   c:\windows\system32\drivers\dtscsi.sys (, 217.90 KB (223,128 bytes), 7/15/2006 12:54 PM)

Highlighted for you.

llsTixll · « **Reply #8 on:** August 20, 2006, 06:04:00 AM »

What SATA chipset does the motherboard have?

Author Topic: " No Drive Detected " Plz Help (Read 52 times)